git-pickaxe: retire pickaxe
authorJunio C Hamano <junkio@cox.net>
Thu, 9 Nov 2006 02:47:54 +0000 (18:47 -0800)
committerJunio C Hamano <junkio@cox.net>
Thu, 9 Nov 2006 02:49:37 +0000 (18:49 -0800)
Just make it take over blame's place.  Documentation and command
have all stopped mentioning "git-pickaxe".  The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.

Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-blame.txt
Documentation/git-pickaxe.txt [deleted file]
Documentation/git.txt
Makefile
blame.c [deleted file]
builtin-blame.c [moved from builtin-pickaxe.c with 98% similarity]
builtin.h
git.c
t/t8003-pickaxe.sh [deleted file]

index 9891c1d3779185c200345c0e6d92763aa155a169..ff54d29d70311643a9e9f03b2e384d7fa0a5baa0 100644 (file)
@@ -7,7 +7,9 @@ git-blame - Show what revision and author last modified each line of a file
 
 SYNOPSIS
 --------
-'git-blame' [-c] [-l] [-t] [-f] [-n] [-p] [-S <revs-file>] [--] <file> [<rev>]
+[verse]
+'git-blame' [-c] [-l] [-t] [-f] [-n] [-p] [-L n,m] [-S <revs-file>]
+            [-M] [-C] [-C] [--since=<date>] [<rev>] [--] <file>
 
 DESCRIPTION
 -----------
@@ -15,6 +17,8 @@ DESCRIPTION
 Annotates each line in the given file with information from the revision which
 last modified the line. Optionally, start annotating from the given revision.
 
+Also it can limit the range of lines annotated.
+
 This report doesn't tell you anything about lines which have been deleted or
 replaced; you need to use a tool such as gitlink:git-diff[1] or the "pickaxe"
 interface briefly mentioned in the following paragraph.
@@ -36,6 +40,12 @@ OPTIONS
 -c, --compatibility::
        Use the same output mode as gitlink:git-annotate[1] (Default: off).
 
+-L n,m::
+       Annotate only the specified line range (lines count from
+       1).  The range can be specified with a regexp.  For
+       example, `-L '/^sub esc_html /,/^}$/'` limits the
+       annotation only to the body of `esc_html` subroutine.
+
 -l, --long::
        Show long rev (Default: off).
 
@@ -56,6 +66,24 @@ OPTIONS
 -p, --porcelain::
        Show in a format designed for machine consumption.
 
+-M::
+       Detect moving lines in the file as well.  When a commit
+       moves a block of lines in a file (e.g. the original file
+       has A and then B, and the commit changes it to B and
+       then A), traditional 'blame' algorithm typically blames
+       the lines that were moved up (i.e. B) to the parent and
+       assigns blame to the lines that were moved down (i.e. A)
+       to the child commit.  With this option, both groups of
+       lines are blamed on the parent.
+
+-C::
+       In addition to `-M`, detect lines copied from other
+       files that were modified in the same commit.  This is
+       useful when you reorganize your program and move code
+       around across files.  When this option is given twice,
+       the command looks for copies from all other files in the
+       parent for the commit that creates the file in addition.
+
 -h, --help::
        Show help message.
 
@@ -86,13 +114,51 @@ The contents of the actual line is output after the above
 header, prefixed by a TAB. This is to allow adding more
 header elements later.
 
+
+SPECIFIYING RANGES
+------------------
+
+Unlike `git-blame` and `git-annotate` in older git, the extent
+of annotation can be limited to both line ranges and revision
+ranges.  When you are interested in finding the origin for
+ll. 40-60 for file `foo`, you can use `-L` option like this:
+
+       git blame -L 40,60 foo
+
+When you are not interested in changes older than the version
+v2.6.18, or changes older than 3 weeks, you can use revision
+range specifiers  similar to `git-rev-list`:
+
+       git blame v2.6.18.. -- foo
+       git blame --since=3.weeks -- foo
+
+When revision range specifiers are used to limit the annotation,
+lines that have not changed since the range boundary (either the
+commit v2.6.18 or the most recent commit that is more than 3
+weeks old in the above example) are blamed for that range
+boundary commit.
+
+A particularly useful way is to see if an added file have lines
+created by copy-and-paste from existing files.  Sometimes this
+indicates that the developer was being sloppy and did not
+refactor the code properly.  You can first find the commit that
+introduced the file with:
+
+       git log --diff-filter=A --pretty=short -- foo
+
+and then annotate the change between the commit and its
+parents, using `commit{caret}!` notation:
+
+       git blame -C -C -f $commit^! -- foo
+
+
 SEE ALSO
 --------
 gitlink:git-annotate[1]
 
 AUTHOR
 ------
-Written by Fredrik Kuivinen <freku045@student.liu.se>.
+Written by Junio C Hamano <junkio@cox.net>
 
 GIT
 ---
diff --git a/Documentation/git-pickaxe.txt b/Documentation/git-pickaxe.txt
deleted file mode 100644 (file)
index c08fdec..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-git-pickaxe(1)
-==============
-
-NAME
-----
-git-pickaxe - Show what revision and author last modified each line of a file
-
-SYNOPSIS
---------
-[verse]
-'git-pickaxe' [-c] [-l] [-t] [-f] [-n] [-p] [-L n,m] [-S <revs-file>]
-              [-M] [-C] [-C] [--since=<date>] [<rev>] [--] <file>
-
-DESCRIPTION
------------
-
-Annotates each line in the given file with information from the revision which
-last modified the line. Optionally, start annotating from the given revision.
-
-Also it can limit the range of lines annotated.
-
-This report doesn't tell you anything about lines which have been deleted or
-replaced; you need to use a tool such as gitlink:git-diff[1] or the "pickaxe"
-interface briefly mentioned in the following paragraph.
-
-Apart from supporting file annotation, git also supports searching the
-development history for when a code snippet occured in a change. This makes it
-possible to track when a code snippet was added to a file, moved or copied
-between files, and eventually deleted or replaced. It works by searching for
-a text string in the diff. A small example:
-
------------------------------------------------------------------------------
-$ git log --pretty=oneline -S'blame_usage'
-5040f17eba15504bad66b14a645bddd9b015ebb7 blame -S <ancestry-file>
-ea4c7f9bf69e781dd0cd88d2bccb2bf5cc15c9a7 git-blame: Make the output
------------------------------------------------------------------------------
-
-OPTIONS
--------
--c, --compatibility::
-       Use the same output mode as gitlink:git-annotate[1] (Default: off).
-
--L n,m::
-       Annotate only the specified line range (lines count from 1).
-
--l, --long::
-       Show long rev (Default: off).
-
--t, --time::
-       Show raw timestamp (Default: off).
-
--S, --rev-file <revs-file>::
-       Use revs from revs-file instead of calling gitlink:git-rev-list[1].
-
--f, --show-name::
-       Show filename in the original commit.  By default
-       filename is shown if there is any line that came from a
-       file with different name, due to rename detection.
-
--n, --show-number::
-       Show line number in the original commit (Default: off).
-
--p, --porcelain::
-       Show in a format designed for machine consumption.
-
--M::
-       Detect moving lines in the file as well.  When a commit
-       moves a block of lines in a file (e.g. the original file
-       has A and then B, and the commit changes it to B and
-       then A), traditional 'blame' algorithm typically blames
-       the lines that were moved up (i.e. B) to the parent and
-       assigns blame to the lines that were moved down (i.e. A)
-       to the child commit.  With this option, both groups of
-       lines are blamed on the parent.
-
--C::
-       In addition to `-M`, detect lines copied from other
-       files that were modified in the same commit.  This is
-       useful when you reorganize your program and move code
-       around across files.  When this option is given twice,
-       the command looks for copies from all other files in the
-       parent for the commit that creates the file in addition.
-
--h, --help::
-       Show help message.
-
-
-THE PORCELAIN FORMAT
---------------------
-
-In this format, each line is output after a header; the
-header at the minumum has the first line which has:
-
-- 40-byte SHA-1 of the commit the line is attributed to;
-- the line number of the line in the original file;
-- the line number of the line in the final file;
-- on a line that starts a group of line from a different
-  commit than the previous one, the number of lines in this
-  group.  On subsequent lines this field is absent.
-
-This header line is followed by the following information
-at least once for each commit:
-
-- author name ("author"), email ("author-mail"), time
-  ("author-time"), and timezone ("author-tz"); similarly
-  for committer.
-- filename in the commit the line is attributed to.
-- the first line of the commit log message ("summary").
-
-The contents of the actual line is output after the above
-header, prefixed by a TAB. This is to allow adding more
-header elements later.
-
-
-SPECIFIYING RANGES
-------------------
-
-Unlike `git-blame` and `git-annotate` in older git, the extent
-of annotation can be limited to both line ranges and revision
-ranges.  When you are interested in finding the origin for
-ll. 40-60 for file `foo`, you can use `-L` option like this:
-
-       git pickaxe -L 40,60 foo
-
-When you are not interested in changes older than the version
-v2.6.18, or changes older than 3 weeks, you can use revision
-range specifiers  similar to `git-rev-list`:
-
-       git pickaxe v2.6.18.. -- foo
-       git pickaxe --since=3.weeks -- foo
-
-When revision range specifiers are used to limit the annotation,
-lines that have not changed since the range boundary (either the
-commit v2.6.18 or the most recent commit that is more than 3
-weeks old in the above example) are blamed for that range
-boundary commit.
-
-A particularly useful way is to see if an added file have lines
-created by copy-and-paste from existing files.  Sometimes this
-indicates that the developer was being sloppy and did not
-refactor the code properly.  You can first find the commit that
-introduced the file with:
-
-       git log --diff-filter=A --pretty=short -- foo
-
-and then annotate the change between the commit and its
-parents, using `commit{caret}!` notation:
-
-       git pickaxe -C -C -f $commit^! -- foo
-
-
-SEE ALSO
---------
-gitlink:git-blame[1]
-
-AUTHOR
-------
-Written by Junio C Hamano <junkio@cox.net>
-
-GIT
----
-Part of the gitlink:git[7] suite
index 4facf2309512380fc796e5f64e400c6ebcb08dbd..52bc05ad50e8c64734c0f5a33c5bbc551128e955 100644 (file)
@@ -252,9 +252,6 @@ gitlink:git-annotate[1]::
        Annotate file lines with commit info.
 
 gitlink:git-blame[1]::
-       Blame file lines on commits.
-
-gitlink:git-pickaxe[1]::
        Find out where each line in a file came from.
 
 gitlink:git-check-ref-format[1]::
index a042df4a2ca7cb6e523151fb22d005ffe3d41b84..36ce8cd606395217850dd824c47d887783a09471 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -201,7 +201,7 @@ PROGRAMS = \
        git-update-server-info$X \
        git-upload-pack$X git-verify-pack$X \
        git-pack-redundant$X git-var$X \
-       git-describe$X git-merge-tree$X git-blame$X git-imap-send$X \
+       git-describe$X git-merge-tree$X git-imap-send$X \
        git-merge-recursive$X \
        $(EXTRA_PROGRAMS)
 
@@ -267,6 +267,7 @@ BUILTIN_OBJS = \
        builtin-annotate.o \
        builtin-apply.o \
        builtin-archive.o \
+       builtin-blame.o \
        builtin-branch.o \
        builtin-cat-file.o \
        builtin-checkout-index.o \
@@ -290,7 +291,6 @@ BUILTIN_OBJS = \
        builtin-mv.o \
        builtin-name-rev.o \
        builtin-pack-objects.o \
-       builtin-pickaxe.o \
        builtin-prune.o \
        builtin-prune-packed.o \
        builtin-push.o \
diff --git a/blame.c b/blame.c
deleted file mode 100644 (file)
index 1144c85..0000000
--- a/blame.c
+++ /dev/null
@@ -1,1089 +0,0 @@
-/*
- * Copyright (C) 2006, Fredrik Kuivinen <freku045@student.liu.se>
- */
-
-#include <assert.h>
-#include <time.h>
-#include <sys/time.h>
-#include <math.h>
-
-#include "cache.h"
-#include "refs.h"
-#include "tag.h"
-#include "commit.h"
-#include "tree.h"
-#include "blob.h"
-#include "diff.h"
-#include "diffcore.h"
-#include "revision.h"
-#include "xdiff-interface.h"
-#include "quote.h"
-
-#ifndef DEBUG
-#define DEBUG 0
-#endif
-
-static const char blame_usage[] =
-"git-blame [-c] [-l] [-t] [-f] [-n] [-p] [-S <revs-file>] [--] file [commit]\n"
-"  -c, --compatibility Use the same output mode as git-annotate (Default: off)\n"
-"  -l, --long          Show long commit SHA1 (Default: off)\n"
-"  -t, --time          Show raw timestamp (Default: off)\n"
-"  -f, --show-name     Show original filename (Default: auto)\n"
-"  -n, --show-number   Show original linenumber (Default: off)\n"
-"  -p, --porcelain     Show in a format designed for machine consumption\n"
-"  -S revs-file        Use revisions from revs-file instead of calling git-rev-list\n"
-"  -h, --help          This message";
-
-static struct commit **blame_lines;
-static int num_blame_lines;
-static char *blame_contents;
-static int blame_len;
-
-struct util_info {
-       int *line_map;
-       unsigned char sha1[20]; /* blob sha, not commit! */
-       char *buf;
-       unsigned long size;
-       int num_lines;
-       const char *pathname;
-       unsigned meta_given:1;
-
-       void *topo_data;
-};
-
-struct chunk {
-       int off1, len1; /* --- */
-       int off2, len2; /* +++ */
-};
-
-struct patch {
-       struct chunk *chunks;
-       int num;
-};
-
-static void get_blob(struct commit *commit);
-
-/* Only used for statistics */
-static int num_get_patch;
-static int num_commits;
-static int patch_time;
-static int num_read_blob;
-
-struct blame_diff_state {
-       struct xdiff_emit_state xm;
-       struct patch *ret;
-};
-
-static void process_u0_diff(void *state_, char *line, unsigned long len)
-{
-       struct blame_diff_state *state = state_;
-       struct chunk *chunk;
-
-       if (len < 4 || line[0] != '@' || line[1] != '@')
-               return;
-
-       if (DEBUG)
-               printf("chunk line: %.*s", (int)len, line);
-       state->ret->num++;
-       state->ret->chunks = xrealloc(state->ret->chunks,
-                                     sizeof(struct chunk) * state->ret->num);
-       chunk = &state->ret->chunks[state->ret->num - 1];
-
-       assert(!strncmp(line, "@@ -", 4));
-
-       if (parse_hunk_header(line, len,
-                             &chunk->off1, &chunk->len1,
-                             &chunk->off2, &chunk->len2)) {
-               state->ret->num--;
-               return;
-       }
-
-       if (chunk->len1 == 0)
-               chunk->off1++;
-       if (chunk->len2 == 0)
-               chunk->off2++;
-
-       if (chunk->off1 > 0)
-               chunk->off1--;
-       if (chunk->off2 > 0)
-               chunk->off2--;
-
-       assert(chunk->off1 >= 0);
-       assert(chunk->off2 >= 0);
-}
-
-static struct patch *get_patch(struct commit *commit, struct commit *other)
-{
-       struct blame_diff_state state;
-       xpparam_t xpp;
-       xdemitconf_t xecfg;
-       mmfile_t file_c, file_o;
-       xdemitcb_t ecb;
-       struct util_info *info_c = (struct util_info *)commit->util;
-       struct util_info *info_o = (struct util_info *)other->util;
-       struct timeval tv_start, tv_end;
-
-       get_blob(commit);
-       file_c.ptr = info_c->buf;
-       file_c.size = info_c->size;
-
-       get_blob(other);
-       file_o.ptr = info_o->buf;
-       file_o.size = info_o->size;
-
-       gettimeofday(&tv_start, NULL);
-
-       xpp.flags = XDF_NEED_MINIMAL;
-       xecfg.ctxlen = 0;
-       xecfg.flags = 0;
-       ecb.outf = xdiff_outf;
-       ecb.priv = &state;
-       memset(&state, 0, sizeof(state));
-       state.xm.consume = process_u0_diff;
-       state.ret = xmalloc(sizeof(struct patch));
-       state.ret->chunks = NULL;
-       state.ret->num = 0;
-
-       xdl_diff(&file_c, &file_o, &xpp, &xecfg, &ecb);
-
-       gettimeofday(&tv_end, NULL);
-       patch_time += 1000000 * (tv_end.tv_sec - tv_start.tv_sec) +
-               tv_end.tv_usec - tv_start.tv_usec;
-
-       num_get_patch++;
-       return state.ret;
-}
-
-static void free_patch(struct patch *p)
-{
-       free(p->chunks);
-       free(p);
-}
-
-static int get_blob_sha1_internal(const unsigned char *sha1, const char *base,
-                                 int baselen, const char *pathname,
-                                 unsigned mode, int stage);
-
-static unsigned char blob_sha1[20];
-static const char *blame_file;
-static int get_blob_sha1(struct tree *t, const char *pathname,
-                        unsigned char *sha1)
-{
-       const char *pathspec[2];
-       blame_file = pathname;
-       pathspec[0] = pathname;
-       pathspec[1] = NULL;
-       hashclr(blob_sha1);
-       read_tree_recursive(t, "", 0, 0, pathspec, get_blob_sha1_internal);
-
-       if (is_null_sha1(blob_sha1))
-               return -1;
-
-       hashcpy(sha1, blob_sha1);
-       return 0;
-}
-
-static int get_blob_sha1_internal(const unsigned char *sha1, const char *base,
-                                 int baselen, const char *pathname,
-                                 unsigned mode, int stage)
-{
-       if (S_ISDIR(mode))
-               return READ_TREE_RECURSIVE;
-
-       if (strncmp(blame_file, base, baselen) ||
-           strcmp(blame_file + baselen, pathname))
-               return -1;
-
-       hashcpy(blob_sha1, sha1);
-       return -1;
-}
-
-static void get_blob(struct commit *commit)
-{
-       struct util_info *info = commit->util;
-       char type[20];
-
-       if (info->buf)
-               return;
-
-       info->buf = read_sha1_file(info->sha1, type, &info->size);
-       num_read_blob++;
-
-       assert(!strcmp(type, blob_type));
-}
-
-/* For debugging only */
-static void print_patch(struct patch *p)
-{
-       int i;
-       printf("Num chunks: %d\n", p->num);
-       for (i = 0; i < p->num; i++) {
-               printf("%d,%d %d,%d\n", p->chunks[i].off1, p->chunks[i].len1,
-                      p->chunks[i].off2, p->chunks[i].len2);
-       }
-}
-
-#if DEBUG
-/* For debugging only */
-static void print_map(struct commit *cmit, struct commit *other)
-{
-       struct util_info *util = cmit->util;
-       struct util_info *util2 = other->util;
-
-       int i;
-       int max =
-           util->num_lines >
-           util2->num_lines ? util->num_lines : util2->num_lines;
-       int num;
-
-       if (print_map == NULL)
-               ; /* to avoid "unused function" warning */
-
-       for (i = 0; i < max; i++) {
-               printf("i: %d ", i);
-               num = -1;
-
-               if (i < util->num_lines) {
-                       num = util->line_map[i];
-                       printf("%d\t", num);
-               }
-               else
-                       printf("\t");
-
-               if (i < util2->num_lines) {
-                       int num2 = util2->line_map[i];
-                       printf("%d\t", num2);
-                       if (num != -1 && num2 != num)
-                               printf("---");
-               }
-               else
-                       printf("\t");
-
-               printf("\n");
-       }
-}
-#endif
-
-/* p is a patch from commit to other. */
-static void fill_line_map(struct commit *commit, struct commit *other,
-                         struct patch *p)
-{
-       struct util_info *util = commit->util;
-       struct util_info *util2 = other->util;
-       int *map = util->line_map;
-       int *map2 = util2->line_map;
-       int cur_chunk = 0;
-       int i1, i2;
-
-       if (DEBUG) {
-               if (p->num)
-                       print_patch(p);
-               printf("num lines 1: %d num lines 2: %d\n", util->num_lines,
-                      util2->num_lines);
-       }
-
-       for (i1 = 0, i2 = 0; i1 < util->num_lines; i1++, i2++) {
-               struct chunk *chunk = NULL;
-               if (cur_chunk < p->num)
-                       chunk = &p->chunks[cur_chunk];
-
-               if (chunk && chunk->off1 == i1) {
-                       if (DEBUG && i2 != chunk->off2)
-                               printf("i2: %d off2: %d\n", i2, chunk->off2);
-
-                       assert(i2 == chunk->off2);
-
-                       i1--;
-                       i2--;
-                       if (chunk->len1 > 0)
-                               i1 += chunk->len1;
-
-                       if (chunk->len2 > 0)
-                               i2 += chunk->len2;
-
-                       cur_chunk++;
-               }
-               else {
-                       if (i2 >= util2->num_lines)
-                               break;
-
-                       if (map[i1] != map2[i2] && map[i1] != -1) {
-                               if (DEBUG)
-                                       printf("map: i1: %d %d %p i2: %d %d %p\n",
-                                              i1, map[i1],
-                                              (void *) (i1 != -1 ? blame_lines[map[i1]] : NULL),
-                                              i2, map2[i2],
-                                              (void *) (i2 != -1 ? blame_lines[map2[i2]] : NULL));
-                               if (map2[i2] != -1 &&
-                                   blame_lines[map[i1]] &&
-                                   !blame_lines[map2[i2]])
-                                       map[i1] = map2[i2];
-                       }
-
-                       if (map[i1] == -1 && map2[i2] != -1)
-                               map[i1] = map2[i2];
-               }
-
-               if (DEBUG > 1)
-                       printf("l1: %d l2: %d i1: %d i2: %d\n",
-                              map[i1], map2[i2], i1, i2);
-       }
-}
-
-static int map_line(struct commit *commit, int line)
-{
-       struct util_info *info = commit->util;
-       assert(line >= 0 && line < info->num_lines);
-       return info->line_map[line];
-}
-
-static struct util_info *get_util(struct commit *commit)
-{
-       struct util_info *util = commit->util;
-
-       if (util)
-               return util;
-
-       util = xcalloc(1, sizeof(struct util_info));
-       util->num_lines = -1;
-       commit->util = util;
-       return util;
-}
-
-static int fill_util_info(struct commit *commit)
-{
-       struct util_info *util = commit->util;
-
-       assert(util);
-       assert(util->pathname);
-
-       return !!get_blob_sha1(commit->tree, util->pathname, util->sha1);
-}
-
-static void alloc_line_map(struct commit *commit)
-{
-       struct util_info *util = commit->util;
-       int i;
-
-       if (util->line_map)
-               return;
-
-       get_blob(commit);
-
-       util->num_lines = 0;
-       for (i = 0; i < util->size; i++) {
-               if (util->buf[i] == '\n')
-                       util->num_lines++;
-       }
-       if (util->buf[util->size - 1] != '\n')
-               util->num_lines++;
-
-       util->line_map = xmalloc(sizeof(int) * util->num_lines);
-
-       for (i = 0; i < util->num_lines; i++)
-               util->line_map[i] = -1;
-}
-
-static void init_first_commit(struct commit *commit, const char *filename)
-{
-       struct util_info *util = commit->util;
-       int i;
-
-       util->pathname = filename;
-       if (fill_util_info(commit))
-               die("fill_util_info failed");
-
-       alloc_line_map(commit);
-
-       util = commit->util;
-
-       for (i = 0; i < util->num_lines; i++)
-               util->line_map[i] = i;
-}
-
-static void process_commits(struct rev_info *rev, const char *path,
-                           struct commit **initial)
-{
-       int i;
-       struct util_info *util;
-       int lines_left;
-       int *blame_p;
-       int *new_lines;
-       int new_lines_len;
-
-       struct commit *commit = get_revision(rev);
-       assert(commit);
-       init_first_commit(commit, path);
-
-       util = commit->util;
-       num_blame_lines = util->num_lines;
-       blame_lines = xmalloc(sizeof(struct commit *) * num_blame_lines);
-       blame_contents = util->buf;
-       blame_len = util->size;
-
-       for (i = 0; i < num_blame_lines; i++)
-               blame_lines[i] = NULL;
-
-       lines_left = num_blame_lines;
-       blame_p = xmalloc(sizeof(int) * num_blame_lines);
-       new_lines = xmalloc(sizeof(int) * num_blame_lines);
-       do {
-               struct commit_list *parents;
-               int num_parents;
-               struct util_info *util;
-
-               if (DEBUG)
-                       printf("\nProcessing commit: %d %s\n", num_commits,
-                              sha1_to_hex(commit->object.sha1));
-
-               if (lines_left == 0)
-                       return;
-
-               num_commits++;
-               memset(blame_p, 0, sizeof(int) * num_blame_lines);
-               new_lines_len = 0;
-               num_parents = 0;
-               for (parents = commit->parents;
-                    parents != NULL; parents = parents->next)
-                       num_parents++;
-
-               if (num_parents == 0)
-                       *initial = commit;
-
-               if (fill_util_info(commit))
-                       continue;
-
-               alloc_line_map(commit);
-               util = commit->util;
-
-               for (parents = commit->parents;
-                    parents != NULL; parents = parents->next) {
-                       struct commit *parent = parents->item;
-                       struct patch *patch;
-
-                       if (parse_commit(parent) < 0)
-                               die("parse_commit error");
-
-                       if (DEBUG)
-                               printf("parent: %s\n",
-                                      sha1_to_hex(parent->object.sha1));
-
-                       if (fill_util_info(parent)) {
-                               num_parents--;
-                               continue;
-                       }
-
-                       patch = get_patch(parent, commit);
-                        alloc_line_map(parent);
-                        fill_line_map(parent, commit, patch);
-
-                        for (i = 0; i < patch->num; i++) {
-                            int l;
-                            for (l = 0; l < patch->chunks[i].len2; l++) {
-                                int mapped_line =
-                                    map_line(commit, patch->chunks[i].off2 + l);
-                                if (mapped_line != -1) {
-                                    blame_p[mapped_line]++;
-                                    if (blame_p[mapped_line] == num_parents)
-                                        new_lines[new_lines_len++] = mapped_line;
-                                }
-                            }
-                       }
-                        free_patch(patch);
-               }
-
-               if (DEBUG)
-                       printf("parents: %d\n", num_parents);
-
-               for (i = 0; i < new_lines_len; i++) {
-                       int mapped_line = new_lines[i];
-                       if (blame_lines[mapped_line] == NULL) {
-                               blame_lines[mapped_line] = commit;
-                               lines_left--;
-                               if (DEBUG)
-                                       printf("blame: mapped: %d i: %d\n",
-                                              mapped_line, i);
-                       }
-               }
-       } while ((commit = get_revision(rev)) != NULL);
-}
-
-static int compare_tree_path(struct rev_info *revs,
-                            struct commit *c1, struct commit *c2)
-{
-       int ret;
-       const char *paths[2];
-       struct util_info *util = c2->util;
-       paths[0] = util->pathname;
-       paths[1] = NULL;
-
-       diff_tree_setup_paths(get_pathspec(revs->prefix, paths),
-                             &revs->pruning);
-       ret = rev_compare_tree(revs, c1->tree, c2->tree);
-       diff_tree_release_paths(&revs->pruning);
-       return ret;
-}
-
-static int same_tree_as_empty_path(struct rev_info *revs, struct tree *t1,
-                                  const char *path)
-{
-       int ret;
-       const char *paths[2];
-       paths[0] = path;
-       paths[1] = NULL;
-
-       diff_tree_setup_paths(get_pathspec(revs->prefix, paths),
-                             &revs->pruning);
-       ret = rev_same_tree_as_empty(revs, t1);
-       diff_tree_release_paths(&revs->pruning);
-       return ret;
-}
-
-static const char *find_rename(struct commit *commit, struct commit *parent)
-{
-       struct util_info *cutil = commit->util;
-       struct diff_options diff_opts;
-       const char *paths[1];
-       int i;
-
-       if (DEBUG) {
-               printf("find_rename commit: %s ",
-                      sha1_to_hex(commit->object.sha1));
-               puts(sha1_to_hex(parent->object.sha1));
-       }
-
-       diff_setup(&diff_opts);
-       diff_opts.recursive = 1;
-       diff_opts.detect_rename = DIFF_DETECT_RENAME;
-       paths[0] = NULL;
-       diff_tree_setup_paths(paths, &diff_opts);
-       if (diff_setup_done(&diff_opts) < 0)
-               die("diff_setup_done failed");
-
-       diff_tree_sha1(commit->tree->object.sha1, parent->tree->object.sha1,
-                      "", &diff_opts);
-       diffcore_std(&diff_opts);
-
-       for (i = 0; i < diff_queued_diff.nr; i++) {
-               struct diff_filepair *p = diff_queued_diff.queue[i];
-
-               if (p->status == 'R' &&
-                   !strcmp(p->one->path, cutil->pathname)) {
-                       if (DEBUG)
-                               printf("rename %s -> %s\n",
-                                      p->one->path, p->two->path);
-                       return p->two->path;
-               }
-       }
-
-       return 0;
-}
-
-static void simplify_commit(struct rev_info *revs, struct commit *commit)
-{
-       struct commit_list **pp, *parent;
-
-       if (!commit->tree)
-               return;
-
-       if (!commit->parents) {
-               struct util_info *util = commit->util;
-               if (!same_tree_as_empty_path(revs, commit->tree,
-                                            util->pathname))
-                       commit->object.flags |= TREECHANGE;
-               return;
-       }
-
-       pp = &commit->parents;
-       while ((parent = *pp) != NULL) {
-               struct commit *p = parent->item;
-
-               if (p->object.flags & UNINTERESTING) {
-                       pp = &parent->next;
-                       continue;
-               }
-
-               parse_commit(p);
-               switch (compare_tree_path(revs, p, commit)) {
-               case REV_TREE_SAME:
-                       parent->next = NULL;
-                       commit->parents = parent;
-                       get_util(p)->pathname = get_util(commit)->pathname;
-                       return;
-
-               case REV_TREE_NEW:
-               {
-                       struct util_info *util = commit->util;
-                       if (revs->remove_empty_trees &&
-                           same_tree_as_empty_path(revs, p->tree,
-                                                   util->pathname)) {
-                               const char *new_name = find_rename(commit, p);
-                               if (new_name) {
-                                       struct util_info *putil = get_util(p);
-                                       if (!putil->pathname)
-                                               putil->pathname = xstrdup(new_name);
-                               }
-                               else {
-                                       *pp = parent->next;
-                                       continue;
-                               }
-                       }
-               }
-
-               /* fallthrough */
-               case REV_TREE_DIFFERENT:
-                       pp = &parent->next;
-                       if (!get_util(p)->pathname)
-                               get_util(p)->pathname =
-                                       get_util(commit)->pathname;
-                       continue;
-               }
-               die("bad tree compare for commit %s",
-                   sha1_to_hex(commit->object.sha1));
-       }
-       commit->object.flags |= TREECHANGE;
-}
-
-struct commit_info
-{
-       char *author;
-       char *author_mail;
-       unsigned long author_time;
-       char *author_tz;
-
-       /* filled only when asked for details */
-       char *committer;
-       char *committer_mail;
-       unsigned long committer_time;
-       char *committer_tz;
-
-       char *summary;
-};
-
-static void get_ac_line(const char *inbuf, const char *what,
-                       int bufsz, char *person, char **mail,
-                       unsigned long *time, char **tz)
-{
-       int len;
-       char *tmp, *endp;
-
-       tmp = strstr(inbuf, what);
-       if (!tmp)
-               goto error_out;
-       tmp += strlen(what);
-       endp = strchr(tmp, '\n');
-       if (!endp)
-               len = strlen(tmp);
-       else
-               len = endp - tmp;
-       if (bufsz <= len) {
-       error_out:
-               /* Ugh */
-               person = *mail = *tz = "(unknown)";
-               *time = 0;
-               return;
-       }
-       memcpy(person, tmp, len);
-
-       tmp = person;
-       tmp += len;
-       *tmp = 0;
-       while (*tmp != ' ')
-               tmp--;
-       *tz = tmp+1;
-
-       *tmp = 0;
-       while (*tmp != ' ')
-               tmp--;
-       *time = strtoul(tmp, NULL, 10);
-
-       *tmp = 0;
-       while (*tmp != ' ')
-               tmp--;
-       *mail = tmp + 1;
-       *tmp = 0;
-}
-
-static void get_commit_info(struct commit *commit, struct commit_info *ret, int detailed)
-{
-       int len;
-       char *tmp, *endp;
-       static char author_buf[1024];
-       static char committer_buf[1024];
-       static char summary_buf[1024];
-
-       ret->author = author_buf;
-       get_ac_line(commit->buffer, "\nauthor ",
-                   sizeof(author_buf), author_buf, &ret->author_mail,
-                   &ret->author_time, &ret->author_tz);
-
-       if (!detailed)
-               return;
-
-       ret->committer = committer_buf;
-       get_ac_line(commit->buffer, "\ncommitter ",
-                   sizeof(committer_buf), committer_buf, &ret->committer_mail,
-                   &ret->committer_time, &ret->committer_tz);
-
-       ret->summary = summary_buf;
-       tmp = strstr(commit->buffer, "\n\n");
-       if (!tmp) {
-       error_out:
-               sprintf(summary_buf, "(%s)", sha1_to_hex(commit->object.sha1));
-               return;
-       }
-       tmp += 2;
-       endp = strchr(tmp, '\n');
-       if (!endp)
-               goto error_out;
-       len = endp - tmp;
-       if (len >= sizeof(summary_buf))
-               goto error_out;
-       memcpy(summary_buf, tmp, len);
-       summary_buf[len] = 0;
-}
-
-static const char *format_time(unsigned long time, const char *tz_str,
-                              int show_raw_time)
-{
-       static char time_buf[128];
-       time_t t = time;
-       int minutes, tz;
-       struct tm *tm;
-
-       if (show_raw_time) {
-               sprintf(time_buf, "%lu %s", time, tz_str);
-               return time_buf;
-       }
-
-       tz = atoi(tz_str);
-       minutes = tz < 0 ? -tz : tz;
-       minutes = (minutes / 100)*60 + (minutes % 100);
-       minutes = tz < 0 ? -minutes : minutes;
-       t = time + minutes * 60;
-       tm = gmtime(&t);
-
-       strftime(time_buf, sizeof(time_buf), "%Y-%m-%d %H:%M:%S ", tm);
-       strcat(time_buf, tz_str);
-       return time_buf;
-}
-
-static void topo_setter(struct commit *c, void *data)
-{
-       struct util_info *util = c->util;
-       util->topo_data = data;
-}
-
-static void *topo_getter(struct commit *c)
-{
-       struct util_info *util = c->util;
-       return util->topo_data;
-}
-
-static int read_ancestry(const char *graft_file,
-                        unsigned char **start_sha1)
-{
-       FILE *fp = fopen(graft_file, "r");
-       char buf[1024];
-       if (!fp)
-               return -1;
-       while (fgets(buf, sizeof(buf), fp)) {
-               /* The format is just "Commit Parent1 Parent2 ...\n" */
-               int len = strlen(buf);
-               struct commit_graft *graft = read_graft_line(buf, len);
-               register_commit_graft(graft, 0);
-               if (!*start_sha1)
-                       *start_sha1 = graft->sha1;
-       }
-       fclose(fp);
-       return 0;
-}
-
-static int lineno_width(int lines)
-{
-       int i, width;
-
-       for (width = 1, i = 10; i <= lines + 1; width++)
-               i *= 10;
-       return width;
-}
-
-static int find_orig_linenum(struct util_info *u, int lineno)
-{
-       int i;
-
-       for (i = 0; i < u->num_lines; i++)
-               if (lineno == u->line_map[i])
-                       return i + 1;
-       return 0;
-}
-
-static void emit_meta(struct commit *c, int lno,
-                     int sha1_len, int compatibility, int porcelain,
-                     int show_name, int show_number, int show_raw_time,
-                     int longest_file, int longest_author,
-                     int max_digits, int max_orig_digits)
-{
-       struct util_info *u;
-       int lineno;
-       struct commit_info ci;
-
-       u = c->util;
-       lineno = find_orig_linenum(u, lno);
-
-       if (porcelain) {
-               int group_size = -1;
-               struct commit *cc = (lno == 0) ? NULL : blame_lines[lno-1];
-               if (cc != c) {
-                       /* This is the beginning of this group */
-                       int i;
-                       for (i = lno + 1; i < num_blame_lines; i++)
-                               if (blame_lines[i] != c)
-                                       break;
-                       group_size = i - lno;
-               }
-               if (0 < group_size)
-                       printf("%s %d %d %d\n", sha1_to_hex(c->object.sha1),
-                              lineno, lno + 1, group_size);
-               else
-                       printf("%s %d %d\n", sha1_to_hex(c->object.sha1),
-                              lineno, lno + 1);
-               if (!u->meta_given) {
-                       get_commit_info(c, &ci, 1);
-                       printf("author %s\n", ci.author);
-                       printf("author-mail %s\n", ci.author_mail);
-                       printf("author-time %lu\n", ci.author_time);
-                       printf("author-tz %s\n", ci.author_tz);
-                       printf("committer %s\n", ci.committer);
-                       printf("committer-mail %s\n", ci.committer_mail);
-                       printf("committer-time %lu\n", ci.committer_time);
-                       printf("committer-tz %s\n", ci.committer_tz);
-                       printf("filename ");
-                       if (quote_c_style(u->pathname, NULL, NULL, 0))
-                               quote_c_style(u->pathname, NULL, stdout, 0);
-                       else
-                               fputs(u->pathname, stdout);
-                       printf("\nsummary %s\n", ci.summary);
-
-                       u->meta_given = 1;
-               }
-               putchar('\t');
-               return;
-       }
-
-       get_commit_info(c, &ci, 0);
-       fwrite(sha1_to_hex(c->object.sha1), sha1_len, 1, stdout);
-       if (compatibility) {
-               printf("\t(%10s\t%10s\t%d)", ci.author,
-                      format_time(ci.author_time, ci.author_tz,
-                                  show_raw_time),
-                      lno + 1);
-       }
-       else {
-               if (show_name)
-                       printf(" %-*.*s", longest_file, longest_file,
-                              u->pathname);
-               if (show_number)
-                       printf(" %*d", max_orig_digits,
-                              lineno);
-               printf(" (%-*.*s %10s %*d) ",
-                      longest_author, longest_author, ci.author,
-                      format_time(ci.author_time, ci.author_tz,
-                                  show_raw_time),
-                      max_digits, lno + 1);
-       }
-}
-
-int main(int argc, const char **argv)
-{
-       int i;
-       struct commit *initial = NULL;
-       unsigned char sha1[20], *sha1_p = NULL;
-
-       const char *filename = NULL, *commit = NULL;
-       char filename_buf[256];
-       int sha1_len = 8;
-       int compatibility = 0;
-       int show_raw_time = 0;
-       int options = 1;
-       struct commit *start_commit;
-
-       const char *args[10];
-       struct rev_info rev;
-
-       struct commit_info ci;
-       const char *buf;
-       int max_digits, max_orig_digits;
-       int longest_file, longest_author, longest_file_lines;
-       int show_name = 0;
-       int show_number = 0;
-       int porcelain = 0;
-
-       const char *prefix = setup_git_directory();
-       git_config(git_default_config);
-
-       for (i = 1; i < argc; i++) {
-               if (options) {
-                       if (!strcmp(argv[i], "-h") ||
-                          !strcmp(argv[i], "--help"))
-                               usage(blame_usage);
-                       if (!strcmp(argv[i], "-l") ||
-                           !strcmp(argv[i], "--long")) {
-                               sha1_len = 40;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "-c") ||
-                           !strcmp(argv[i], "--compatibility")) {
-                               compatibility = 1;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "-t") ||
-                           !strcmp(argv[i], "--time")) {
-                               show_raw_time = 1;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "-S")) {
-                               if (i + 1 < argc &&
-                                   !read_ancestry(argv[i + 1], &sha1_p)) {
-                                       compatibility = 1;
-                                       i++;
-                                       continue;
-                               }
-                               usage(blame_usage);
-                       }
-                       if (!strcmp(argv[i], "-f") ||
-                           !strcmp(argv[i], "--show-name")) {
-                               show_name = 1;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "-n") ||
-                           !strcmp(argv[i], "--show-number")) {
-                               show_number = 1;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "-p") ||
-                           !strcmp(argv[i], "--porcelain")) {
-                               porcelain = 1;
-                               sha1_len = 40;
-                               show_raw_time = 1;
-                               continue;
-                       }
-                       if (!strcmp(argv[i], "--")) {
-                               options = 0;
-                               continue;
-                       }
-                       if (argv[i][0] == '-')
-                               usage(blame_usage);
-                       options = 0;
-               }
-
-               if (!options) {
-                       if (!filename)
-                               filename = argv[i];
-                       else if (!commit)
-                               commit = argv[i];
-                       else
-                               usage(blame_usage);
-               }
-       }
-
-       if (!filename)
-               usage(blame_usage);
-       if (commit && sha1_p)
-               usage(blame_usage);
-       else if (!commit)
-               commit = "HEAD";
-
-       if (prefix)
-               sprintf(filename_buf, "%s%s", prefix, filename);
-       else
-               strcpy(filename_buf, filename);
-       filename = filename_buf;
-
-       if (!sha1_p) {
-               if (get_sha1(commit, sha1))
-                       die("get_sha1 failed, commit '%s' not found", commit);
-               sha1_p = sha1;
-       }
-       start_commit = lookup_commit_reference(sha1_p);
-       get_util(start_commit)->pathname = filename;
-       if (fill_util_info(start_commit)) {
-               printf("%s not found in %s\n", filename, commit);
-               return 1;
-       }
-
-       init_revisions(&rev, setup_git_directory());
-       rev.remove_empty_trees = 1;
-       rev.topo_order = 1;
-       rev.prune_fn = simplify_commit;
-       rev.topo_setter = topo_setter;
-       rev.topo_getter = topo_getter;
-       rev.parents = 1;
-       rev.limited = 1;
-
-       commit_list_insert(start_commit, &rev.commits);
-
-       args[0] = filename;
-       args[1] = NULL;
-       diff_tree_setup_paths(args, &rev.pruning);
-       prepare_revision_walk(&rev);
-       process_commits(&rev, filename, &initial);
-
-       for (i = 0; i < num_blame_lines; i++)
-               if (!blame_lines[i])
-                       blame_lines[i] = initial;
-
-       buf = blame_contents;
-       max_digits = lineno_width(num_blame_lines);
-
-       longest_file = 0;
-       longest_author = 0;
-       longest_file_lines = 0;
-       for (i = 0; i < num_blame_lines; i++) {
-               struct commit *c = blame_lines[i];
-               struct util_info *u;
-               u = c->util;
-
-               if (!show_name && strcmp(filename, u->pathname))
-                       show_name = 1;
-               if (longest_file < strlen(u->pathname))
-                       longest_file = strlen(u->pathname);
-               if (longest_file_lines < u->num_lines)
-                       longest_file_lines = u->num_lines;
-               get_commit_info(c, &ci, 0);
-               if (longest_author < strlen(ci.author))
-                       longest_author = strlen(ci.author);
-       }
-
-       max_orig_digits = lineno_width(longest_file_lines);
-
-       for (i = 0; i < num_blame_lines; i++) {
-               emit_meta(blame_lines[i], i,
-                         sha1_len, compatibility, porcelain,
-                         show_name, show_number, show_raw_time,
-                         longest_file, longest_author,
-                         max_digits, max_orig_digits);
-
-               if (i == num_blame_lines - 1) {
-                       fwrite(buf, blame_len - (buf - blame_contents),
-                              1, stdout);
-                       if (blame_contents[blame_len-1] != '\n')
-                               putc('\n', stdout);
-               }
-               else {
-                       char *next_buf = strchr(buf, '\n') + 1;
-                       fwrite(buf, next_buf - buf, 1, stdout);
-                       buf = next_buf;
-               }
-       }
-
-       if (DEBUG) {
-               printf("num read blob: %d\n", num_read_blob);
-               printf("num get patch: %d\n", num_get_patch);
-               printf("num commits: %d\n", num_commits);
-               printf("patch time: %f\n", patch_time / 1000000.0);
-               printf("initial: %s\n", sha1_to_hex(initial->object.sha1));
-       }
-
-       return 0;
-}
similarity index 98%
rename from builtin-pickaxe.c
rename to builtin-blame.c
index 64999f3577294eb2bfe030be386dacd7b3787bbf..16660221c30b0e3b1e1bd4cbc5559e3f162ae05a 100644 (file)
@@ -19,8 +19,8 @@
 #include <sys/time.h>
 #include <regex.h>
 
-static char pickaxe_usage[] =
-"git-pickaxe [-c] [-l] [-t] [-f] [-n] [-p] [-L n,m] [-S <revs-file>] [-M] [-C] [-C] [commit] [--] file\n"
+static char blame_usage[] =
+"git-blame [-c] [-l] [-t] [-f] [-n] [-p] [-L n,m] [-S <revs-file>] [-M] [-C] [-C] [commit] [--] file\n"
 "  -c, --compatibility Use the same output mode as git-annotate (Default: off)\n"
 "  -l, --long          Show long commit SHA1 (Default: off)\n"
 "  -t, --time          Show raw timestamp (Default: off)\n"
@@ -287,12 +287,12 @@ static struct origin *find_origin(struct scoreboard *sb,
                hashcpy(porigin->blob_sha1, origin->blob_sha1);
        }
        else if (diff_queued_diff.nr != 1)
-               die("internal error in pickaxe::find_origin");
+               die("internal error in blame::find_origin");
        else {
                struct diff_filepair *p = diff_queued_diff.queue[0];
                switch (p->status) {
                default:
-                       die("internal error in pickaxe::find_origin (%c)",
+                       die("internal error in blame::find_origin (%c)",
                            p->status);
                case 'M':
                        porigin = get_origin(sb, parent, origin->path);
@@ -1619,13 +1619,13 @@ static void prepare_blame_range(struct scoreboard *sb,
        if (*term == ',') {
                term = parse_loc(term + 1, sb, lno, *bottom + 1, top);
                if (*term)
-                       usage(pickaxe_usage);
+                       usage(blame_usage);
        }
        if (*term)
-               usage(pickaxe_usage);
+               usage(blame_usage);
 }
 
-int cmd_pickaxe(int argc, const char **argv, const char *prefix)
+int cmd_blame(int argc, const char **argv, const char *prefix)
 {
        struct rev_info revs;
        const char *path;
@@ -1669,7 +1669,7 @@ int cmd_pickaxe(int argc, const char **argv, const char *prefix)
                else if (!strncmp("-L", arg, 2)) {
                        if (!arg[2]) {
                                if (++i >= argc)
-                                       usage(pickaxe_usage);
+                                       usage(blame_usage);
                                arg = argv[i];
                        }
                        else
@@ -1734,16 +1734,16 @@ int cmd_pickaxe(int argc, const char **argv, const char *prefix)
        if (seen_dashdash) {
                /* (1) */
                if (argc <= i)
-                       usage(pickaxe_usage);
+                       usage(blame_usage);
                path = add_prefix(prefix, argv[i]);
                if (i + 1 == argc - 1) {
                        if (unk != 1)
-                               usage(pickaxe_usage);
+                               usage(blame_usage);
                        argv[unk++] = argv[i + 1];
                }
                else if (i + 1 != argc)
                        /* garbage at end */
-                       usage(pickaxe_usage);
+                       usage(blame_usage);
        }
        else {
                int j;
@@ -1752,7 +1752,7 @@ int cmd_pickaxe(int argc, const char **argv, const char *prefix)
                                seen_dashdash = j;
                if (seen_dashdash) {
                        if (seen_dashdash + 1 != argc - 1)
-                               usage(pickaxe_usage);
+                               usage(blame_usage);
                        path = add_prefix(prefix, argv[seen_dashdash + 1]);
                        for (j = i; j < seen_dashdash; j++)
                                argv[unk++] = argv[j];
@@ -1772,7 +1772,7 @@ int cmd_pickaxe(int argc, const char **argv, const char *prefix)
                                }
                        }
                        else if (i != argc - 1)
-                               usage(pickaxe_usage); /* garbage at end */
+                               usage(blame_usage); /* garbage at end */
 
                        if (!has_path_in_work_tree(path))
                                die("cannot stat path %s: %s",
index 24803dfea778c42d748aeba1df74571ad4a66493..43fed329ba58a8adcdac9cb2260ad3370d9ad6cc 100644 (file)
--- a/builtin.h
+++ b/builtin.h
@@ -17,6 +17,7 @@ extern int cmd_add(int argc, const char **argv, const char *prefix);
 extern int cmd_annotate(int argc, const char **argv, const char *prefix);
 extern int cmd_apply(int argc, const char **argv, const char *prefix);
 extern int cmd_archive(int argc, const char **argv, const char *prefix);
+extern int cmd_blame(int argc, const char **argv, const char *prefix);
 extern int cmd_branch(int argc, const char **argv, const char *prefix);
 extern int cmd_cat_file(int argc, const char **argv, const char *prefix);
 extern int cmd_checkout_index(int argc, const char **argv, const char *prefix);
diff --git a/git.c b/git.c
index 9a9addf71d3f2f7d712ff3cd2e0fa6dfec31dd28..1aa07a5164012dddf2fb0dca23c08d9c487e7d54 100644 (file)
--- a/git.c
+++ b/git.c
@@ -222,6 +222,7 @@ static void handle_internal_command(int argc, const char **argv, char **envp)
                { "annotate", cmd_annotate, },
                { "apply", cmd_apply },
                { "archive", cmd_archive },
+               { "blame", cmd_blame, RUN_SETUP | USE_PAGER },
                { "branch", cmd_branch, RUN_SETUP },
                { "cat-file", cmd_cat_file, RUN_SETUP },
                { "checkout-index", cmd_checkout_index, RUN_SETUP },
@@ -249,7 +250,7 @@ static void handle_internal_command(int argc, const char **argv, char **envp)
                { "mv", cmd_mv, RUN_SETUP },
                { "name-rev", cmd_name_rev, RUN_SETUP },
                { "pack-objects", cmd_pack_objects, RUN_SETUP },
-               { "pickaxe", cmd_pickaxe, RUN_SETUP | USE_PAGER },
+               { "pickaxe", cmd_blame, RUN_SETUP | USE_PAGER },
                { "prune", cmd_prune, RUN_SETUP },
                { "prune-packed", cmd_prune_packed, RUN_SETUP },
                { "push", cmd_push, RUN_SETUP },
diff --git a/t/t8003-pickaxe.sh b/t/t8003-pickaxe.sh
deleted file mode 100755 (executable)
index d09d1c9..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-test_description='git-pickaxe'
-. ./test-lib.sh
-
-PROG='git pickaxe -c'
-. ../annotate-tests.sh
-
-test_done