Hash: SHA1
MD5 1263c46695d96ea0f5d40540b938c13c metadata.xml 301
-MD5 ec85a3fbaab89d69e8ff0a69d0a41737 ChangeLog 1225
-MD5 9916f6afe9b13479cd4f7f08f501197b fritzcapi-2.6.26.7-r3.ebuild 4335
-MD5 86fdda254b3cadec4c561d8cafc888fa files/digest-fritzcapi-2.6.26.7-r3 151
+MD5 164cfd3d27739f7e020fb1874971602e ChangeLog 1408
+MD5 43adc139a4874452261bfbab49947c3a fritzcapi-2.6.26.7-r3.ebuild 4285
+MD5 4e97476cdc108508618f39f2aab8c70c files/digest-fritzcapi-2.6.26.7-r3 151
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
-iD8DBQFBvMK0jtv59x0+BrURApxQAKD7UU+Xi4XCk9rqdD7xxr2l56Ks5wCdFiTG
-1PiLV7AMftUGceIVpCIiy6s=
-=mY80
+iD8DBQFBygG9jtv59x0+BrURAowjAJ49UVSw8gcU2spXYFH2clq68LpicACgzt1J
+ix4WJUetZ4PsWm3vDwwgBhI=
+=ACxE
-----END PGP SIGNATURE-----
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-dialup/fritzcapi/fritzcapi-2.6.26.7-r3.ebuild,v 1.1 2004/12/12 22:14:02 mrness Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/fritzcapi/fritzcapi-2.6.26.7-r3.ebuild,v 1.2 2004/12/22 23:22:27 mrness Exp $
-inherit kernel-mod rpm eutils
-
-S="${WORKDIR}/usr/src/kernel-modules/fritzcapi"
+inherit linux-mod rpm eutils
DESCRIPTION="SuSE's 2.6 AVM kernel modules for fcclassic, fcpci, fcpcmcia, fcpnp, fcusb, fcusb2, fxusb_CZ and fxusb"
HOMEPAGE="http://www.avm.de/"
SRC_URI="ftp://ftp.suse.com/pub/suse/i386/update/9.1/rpm/i586/km_${P/2.6./2.6-}.i586.rpm
- mirror://gentoo/fcusb2-firmware-3.11.04.tar.bz2"
+ ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586/capi4linux-2004.4.5-0.i586.rpm"
LICENSE="LGPL-2"
SLOT="0"
KEYWORDS="~x86"
IUSE="pcmcia usb"
-RDEPEND=">=net-dialup/capi4k-utils-20040810"
-DEPEND="${RDEPEND}
- virtual/linux-sources"
+DEPEND=">=net-dialup/capi4k-utils-20040810"
+
+S="${WORKDIR}/usr/src/kernel-modules/fritzcapi"
FRITZCAPI_MODULES=("fcclassic" "fcpci" "fcpcmcia" "fcpnp" "fcusb" "fcusb2" "fxusb_CZ" "fxusb")
FRITZCAPI_TARGETS=("fritz.classic" "fritz.pci" "fritz.pcmcia" "fritz.pnp" "fritz.usb" "fritz.usb2" "fritz.xusb_CZ" "fritz.xusb")
+BUILD_PARAMS="KDIR=${KV_DIR}"
+BUILD_TARGETS="all"
+
+get_card_module_name() {
+ local CARD=$1
+ echo "${FRITZCAPI_MODULES[CARD]}(extra:${S}/${FRITZCAPI_TARGETS[CARD]}/src)"
+ if [ "${FRITZCAPI_MODULES[CARD]/pcmcia/}" != ${FRITZCAPI_MODULES[CARD]} ]; then
+ #PCMCIA have also a *_cs module
+ echo "${FRITZCAPI_MODULES[CARD]}_cs(extra:${S}/${FRITZCAPI_TARGETS[CARD]}/src)"
+ fi
+}
+
pkg_setup() {
- if ! kernel-mod_is_2_6_kernel; then
+ linux-mod_pkg_setup
+ if ! kernel_is 2 6; then
die "This package works only with 2.6 kernel!"
fi
- if ! kernel-mod_configoption_present ISDN_CAPI_CAPI20; then
+ if ! linux_chkconfig_present ISDN_CAPI_CAPI20; then
die "For using the driver you need a kernel with enabled CAPI support."
fi
- kernel-mod_check_modules_supported
local USERCARD CARD
FRITZCAPI_BUILD_CARDS=""
FRITZCAPI_BUILD_TARGETS=""
+ MODULE_NAMES=""
if [ -n "${FRITZCAPI_CARDS}" ]; then
#Check existence of user selected cards
for USERCARD in ${FRITZCAPI_CARDS} ; do
for ((CARD=0; CARD < ${#FRITZCAPI_MODULES[*]}; CARD++)); do
- if [ "$USERCARD" = "${FRITZCAPI_MODULES[CARD]}" ]; then
+ if [ "${USERCARD}" = "${FRITZCAPI_MODULES[CARD]}" ]; then
FRITZCAPI_BUILD_CARDS="${FRITZCAPI_BUILD_CARDS} ${FRITZCAPI_MODULES[CARD]}"
FRITZCAPI_BUILD_TARGETS="${FRITZCAPI_BUILD_TARGETS} ${FRITZCAPI_TARGETS[CARD]}"
+ MODULE_NAMES="${MODULE_NAMES} `get_card_module_name ${CARD}`"
continue 2
fi
done
fi
FRITZCAPI_BUILD_CARDS="${FRITZCAPI_BUILD_CARDS} ${FRITZCAPI_MODULES[CARD]}"
FRITZCAPI_BUILD_TARGETS="${FRITZCAPI_BUILD_TARGETS} ${FRITZCAPI_TARGETS[CARD]}"
+ MODULE_NAMES="${MODULE_NAMES} `get_card_module_name ${CARD}`"
done
fi
einfo "Selected cards: ${FRITZCAPI_BUILD_CARDS}"
}
-src_unpack() {
- rpm_src_unpack ${A} || die "Could not unpack RPM package."
-}
-
-src_compile() {
- (
- unset ARCH
- emake KERNEL_SOURCE="${ROOT}/usr/src/linux" TARGETS="${FRITZCAPI_BUILD_TARGETS}" modules || \
- die "emake modules failed"
- )
-}
-
src_install() {
+ linux-mod_src_install
+
dodir /lib/firmware /etc
- insinto /lib/modules/${KV_VERSION_FULL}/extra
- doins fritz.*/src/*.ko
echo -e "# card\tfile\tproto\tio\tirq\tmem\tcardnr\toptions" >${D}/etc/capi.conf
echo "#" >>${D}/etc/capi.conf
[ "${FRITZCAPI_BUILD_TARGETS/xusb_CZ/}" != "${FRITZCAPI_BUILD_TARGETS}" ] && \
- dodoc fritz.xusb_CZ/README.fxusb_CZ
+ dodoc ${S}/fritz.xusb_CZ/README.fxusb_CZ
[ "${FRITZCAPI_BUILD_TARGETS/usb2/}" != "${FRITZCAPI_BUILD_TARGETS}" ] && (
- dodir /etc/hotplug/usb
- cd ${WORKDIR}/fcusb2
- insopts -m0755
- insinto /etc/hotplug/usb
- doins hotplug/usb/*
-
insinto /lib/firmware
insopts -m0644
- doins firmware/*
+ doins ${WORKDIR}/usr/lib/isdn/*
echo -e "#fcusb2\tput_here_your_firmware\t-\t-\t-\t-\t-" >>${D}/etc/capi.conf
)
}
pkg_postinst() {
- einfo "Checking kernel module dependencies"
- [ -r "${ROOT}/usr/src/linux/System.map" ] && \
- depmod -ae -F "${ROOT}/usr/src/linux/System.map" -b "${ROOT}" -r ${KV}
+ linux-mod_pkg_postinst
- einfo "If your device need a firmware, you should edit copy the firmware files"
+ einfo "If your device needs a firmware, you should edit copy the firmware files"
einfo "in /lib/firmware and edit /etc/capi.conf."
einfo
[ "${FRITZCAPI_BUILD_TARGETS/usb2/}" != "${FRITZCAPI_BUILD_TARGETS}" ] && (
projects / gentoo.git / commitdiff