These have been in comedilib for a long time

diff --git a/man/comedi.7 b/man/comedi.7
deleted file mode 100644 (file)
index 9be638b..0000000
--- a/man/comedi.7
+++ /dev/null
@@ -1,59 +0,0 @@
-.TH comedi 7 ""
-.SH NAME
-\fBcomedi\fR - the Linux Control and Measurement Device Interface
-.SH SYNOPSIS
-\fB#include <comedi.h>\fR
-.br
-.SH DESCRIPTION
-The \fBcomedi\fR package is a collection of hardware drivers and
-library routines that can be used to communicate with a variety of
-data acquisition boards, including A/D converters, D/A converters,
-digital I/O and timers.
-
-The hardware drivers that are installed on your system may include
-one or more of the following:
-
-       \fB8255\fR - Generic 8255 support
-.br
-       \fBdas08\fR - Keithley DAS08 and compatibles
-.br
-       \fBdt2811\fR - Data Translation DT2811
-.br
-       \fBdt2814\fR - Data Translation DT2814
-.br
-       \fBdt2817\fR - Data Translation DT2817
-.br
-       \fBdt282x\fR - Data Translation DT2821 series
-.br
-       \fBni_E\fR - National Instruments AT-MIO E series
-.br
-       \fBni_E\fR - National Instruments AT-MIO (Am9513 based)
-.br
-       \fBparport\fR - Standard PC parallel port digital I/O
-.br
-       \fBpcl711\fR - PC-LabCard PCL-711, 711B
-.br
-       \fBpcl711\fR - PC-LabCard PCL-725
-.br
-       \fBpcl711\fR - PC-LabCard PCL-726
-.br
-       \fBrti800\fR - Analog Devices RTI-800/815
-
-.SH OTHER DOCUMENTATION
-
-The following man pages may be useful:
-
-\fBcomedi_config\fR(8), 
-
-Additional text documentation is located in /usr/doc/comedi-0.5.0.
-
-.SH VERSION
-
-0.5.0
-
-The current version can be found at ftp://stm.lbl.gov/pub/comedi.
-
-.SH AUTHOR
-
-David Schleef, <ds@stm.lbl.gov>
-

diff --git a/man/comedi_config.8 b/man/comedi_config.8
deleted file mode 100644 (file)
index 9296475..0000000
--- a/man/comedi_config.8
+++ /dev/null
@@ -1,177 +0,0 @@
-.TH comedi_config 8 ""
-.SH NAME
-\fBcomedi_config\fR - COMEDI configuration utility
-.SH SYNOPSIS
-\fB/usr/sbin/comedi_config\fR [-vVq] /dev/comediN <driver>
-<option1>[,<option2>...]
-.br
-.SH DESCRIPTION
-\fBcomedi_config\fR is a utility designed to configure
-control and measurement hardware associated with a particular
-\fBcomedi\fR device.  You must have the \fBcomedi\fR module installed
-in the kernel to use this utility.
-
-Each control and measurement card in your computer is associated
-with an individual comedi device; to a user, these appear as the
-files \fB/dev/comedi\fRN, with N being 0,1,2,3,etc.  To configure
-\fBcomedi\fR to use a particular hardware driver for your card,
-you would use this utility with the device file, driver name, and
-other vital parameters (I/O base address, IRQ, etc.) on the
-command line.
-
-As an example, the command line used to tell the comedi module that
-you want to access a National Instruments AT-MIO E series board as
-\fB/dev/comedi0\fR would be:
-
-       /usr/sbin/comedi_config /dev/comedi0 atmio-E 0x220,3
-
-This tells the driver that the board is configured
-for I/O base 0x220 and IRQ 3.  In general, I/O base is listed first
-and IRQ, if necessary, is listed second.  Additional parameters
-vary, so see the information below for the particular driver.
-
-Parameters can be expressed in either decimal or hexadecimal, with
-a 0x prefix.
-
-
-.SH OPTIONS
-
-\fBcomedi_config\fR recognizes the following options:
-
-\fB-a\fR       obtain configuration information from the file
-/fB/etc/comedi.conf/fR.
-
-\fB-q\fR       don't print output while running.
-
-\fB-v\fR       print verbose output while running.
-
-\fB-V\fR       print version number and exit.
-
-.SH HARDWARE DRIVERS
-
-Additional information pertaining to each hardware driver is
-available in \fB/usr/doc/comedi-0.5.0\fR.  Unless noted,
-the names below are the same as the driver names given on
-the command line.
-
-\fB8255\fR     Generic 8255 support
-.br
-       <I/O base>
-
-\fBdas08\fR - Keithley DAS08 and compatibles
-.br
-       <I/O base>
-
-\fBdt2811\fR - Data Translation DT2811
-.br
-       <I/O base>
-.br
-       Interrupts are not used with this board.
-
-\fBdt2814\fR - Data Translation DT2814
-.br
-       <I/O base>,<IRQ>
-.br
-       Set IRQ to -1 to probe for IRQ.
-
-\fBdt2817\fR - Data Translation DT2817
-.br
-       <I/O base>
-
-\fBdt282x\fR - Data Translation DT2821 series
-.br
-       <I/O base>,<IRQ>,<DMA 1>,<DMA 2>,
-<analog reference>,
-<encoding, analog input>,
-<encoding, analog output 0>,
-<encoding, analog output 1>,
-<voltage range, analog input>,
-<voltage range, analog output 0>,
-<voltage range, analog output 1>.
-.br
-       Valid values for analog reference are 0=single ended,
-1=differential.
-Valid values for encoding are
-[0=straight or offset binary, 1=two's complement].
-Valid values for voltage range are
-0=(-10,10), 1=(0,10), 2=(-5,+5), 3=(0,5),
-4=(-2.5,2.5).
-Options must agree with how your board is
-configured.
-.br
-       The driver recognizes the following names:
-\fBdt2821\fR,
-\fBdt2823\fR,
-\fBdt2824-pgh\fR,
-\fBdt2824-pgl\fR,
-\fBdt2825\fR,
-\fBdt2827\fR,
-\fBdt2828\fR.
-Use the name that best represents your board.
-
-\fBatmio-E\fR - National Instruments AT-MIO E series
-.br
-       <I/O base>,<IRQ>
-.br
-       This driver automatically detects which board is installed
-in your computer.  The E-series boards are plug-and-play, so use
-\fBisapnptools\fR to tell the board which I/O port to use before
-running \fBcomedi_config\fR.  In a random fit of stupidity, the
-E-series boards ignore the IRQ which PnP assigns to it.
-
-\fBparport\fR - Standard PC parallel port digital I/O
-.br
-       <I/O base>
-.br
-       This driver does not work with the new parallel port sharing
-capabilities of Linux.
-
-\fBpcl711\fR - PC-LabCard PCL-711, 711B, ACL-8112
-.br
-       <I/O base>
-.br
-       Use the driver name \fBpcl711b\fR to configure for a 711B board.
-
-\fBpcl725\fR - PC-LabCard PCL-725
-.br
-       <I/O base>
-.br
-
-\fBpcl726\fR - PC-LabCard PCL-726
-.br
-       <I/O base>
-.br
-
-\fBrti800\fR - Analog Devices RTI-800/815
-.br
-       <I/O base>
-
-.SH CONFIGURATION FILE
-
-[This section has not been implemented yet.]
-
-A list of device configurations can be put into the file
-\fB/etc/comedi.conf\fR.  This file takes the form
-
-       <device> <driver> <param1>,<param2>,...
-
-These configurations will be read and performed when the
-switch \fB-a\fR is used.  This is potentially useful when
-run from an initialization script.
-
-.SH OTHER DOCUMENTATION
-
-\fBcomedi\fR(7), 
-
-Additional text documentation is located in /usr/doc/comedi-0.5.0.
-
-.SH VERSION
-
-0.5.0
-
-The current version can be obtained from ftp://stm.lbl.gov/pub/comedi.
-
-.SH AUTHOR
-
-David Schleef, <ds@stm.lbl.gov>
-