+++ /dev/null
-#!/sbin/openrc-run
-# Copyright 1999-2012 Ultimate Linux Solutions CC
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
- before dahdi
- after wanrouter
-}
-
-dahdi_load_modules() {
- local hwlist loc status mod mod_vname pciid desc
-
- hwlist=$(/usr/sbin/dahdi_hardware)
-
- if [ -z "${hwlist}" ]; then
- einfo "No digium hardware found."
- ebegin "Loading module dahdi_dummy"
- /sbin/modprobe dahdi_dummy
- eend $?
- return
- fi
-
- echo "${hwlist}" | while read loc mod pciid desc; do
- status="${mod:${#mod}-1:1}"
- mod="${mod%[+-]}"
- mod_vname="mod_${mod}"
-
- einfo "Found $desc at $loc (module: $mod)"
-
- if [ "${status}" = "-" -a "${!mod_vname-notloaded}" = "notloaded" ]; then
- ebegin "Loading module $mod"
- /sbin/modprobe $mod
- eend
-
- [ $? -eq 0 ] && eval "$mod_vname=loaded"
- fi
- done
-}
-
-dahdi_module_unload() {
- local mod=$1 s
- [ -d /sys/module/${mod} ] || return 0
-
- for s in $(find /sys/module/${mod}/holders -type l); do
- dahdi_module_unload $(basename $s)
- done
-
- ebegin "Removing dahdi module: $mod"
- /sbin/rmmod $mod
- eend $?
-}
-
-dahdi_gen_fxo_config() {
- local port=$1
-
- echo "fxs${DAHDI_FXO_SIGNALLING-ks}=${port}"
- [ "${DAHDI_FXO_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
-}
-
-dahdi_gen_fxs_config() {
- local port=$1
-
- echo "fxo${DAHDI_FXO_SIGNALLING-ks}=${port}"
- [ "${DAHDI_FXS_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${port}"
-}
-
-dahdi_gen_bri_te_config() {
- span=$1
- port=$2
- basechan=$3
-
- echo "span=${span},${port},0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
- echo "bchan=${basechan}-$(( basechan + 1 ))"
- echo "hardhdlc=$(( basechan + 2 ))"
- [ "${DAHDI_BRI_TE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
-}
-
-dahdi_gen_bri_nt_config() {
- span=$1
- port=$2
- basechan=$3
-
- echo "span=${span},0,0,${DAHDI_BRI_FRAMING-CSS},${DAHDI_BRI_CODING-AMI}"
- echo "bchan=${basechan}-$(( basechan + 1 ))"
- echo "hardhdlc=$(( basechan + 2 ))"
- [ "${DAHDI_BRI_NT_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${basechan}-$(( basechan + 1 ))"
-}
-
-dahdi_gen_e1_cpe_config() {
- span=$1
- port=$2
- basechan=$3
-
- echo "span=${span},${port},0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
- bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
- echo "bchan=${bchans}"
- echo "dchan=$(( basechan + 15 ))"
- [ "${DAHDI_E1_CPE_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
-}
-
-dahdi_gen_e1_net_config() {
- span=$1
- port=$2
- basechan=$3
-
- echo "span=${span},0,0,${DAHDI_E1_FRAMING-CCS},${DAHDI_E1_CODING-HDB3,CRC4}"
- bchans="${basechan}-$(( basechan + 14 )),$(( basechan + 16 ))-$(( basechan + 30 ))"
- echo "bchan=${bchans}"
- echo "dchan=$(( basechan + 15 ))"
- [ "${DAHDI_E1_NET_ECHOCAN-yes}" = yes ] && echo "echocanceller=${DAHDI_ECHOCAN-mg2},${bchans}"
-}
-
-dahdi_conf_span() {
- local span=$1
- local type=$2
- local desc=$3
- local port=$4
- local basechan=$5
- local vname=""
-
- # Analog we need to deal with on a port-by-port basis.
- [ "${type}" = "analog" ] && return 0
-
- echo -e "\n# ${desc}"
- case "${type}" in
- digital-TE)
- dahdi_gen_bri_te_config "${span}" "${port}" "${basechan}"
- ;;
- digital-NT)
- dahdi_gen_bri_nt_config "${span}" "${port}" "${basechan}"
- ;;
- digital-E1)
- # Use CPE by default. Unfortunately there is no easy
- # way to detect CPE vs NET as far as I know and specifying
- # in a config that you want NET mode seems the sanest way.
- vname="PRI_SPAN_${span}_NET"
- if [[ "${!vname}" = [Yy][Ee][Ss] ]]; then
- dahdi_gen_e1_net_config "${span}" "${port}" "${basechan}"
- else
- dahdi_gen_e1_cpe_config "${span}" "${port}" "${basechan}"
- fi
- ;;
- *)
- echo "# Don't know how to configure this (type=${type})."
- echo "# Please file a bug on bugs.gentoo.org and add jaco@uls.co.za as CC."
- ;;
- esac
-}
-
-dahdi_gen_config() {
- local type manufacturer devicetype basechan aport atype
- local span=
- local tfile="$(mktemp)"
- local sfile="$(mktemp)"
- local plocation=""
- local isdnport=0
-
- /usr/sbin/dahdi_scan > "${sfile}"
- exec 3<"${sfile}"
-
- echo "# Automatically dahdi-autoconf generated file ($(date))." >> "${tfile}"
- echo "# This file WILL get regenerated whenever you restart dahdi-autoconf." >> "${tfile}"
-
- while read LINE <&3; do
- case "$LINE" in
- [[]*[]])
- [ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}"
- span="${LINE%?}"
- span="${span#?}"
- ;;
- type=*|manufacturer=*|devicetype=*|basechan=*|name=*)
- eval "${LINE%%=*}='${LINE#*=}'"
- ;;
- location=*)
- eval "${LINE%%=*}='${LINE#*=}'"
- if [ "${location}" == "${plocation}" ]; then
- (( ++isdnport ))
- else
- plocation="${location}"
- isdnport=1
- fi
- ;;
- port=*)
- # For analog cards only.
- aport="${LINE#*=}"; aport="${aport%,*}"
- atype="${LINE#*,}"
- [ "${aport}" -eq "${basechan}" ] && echo -e "\n# ${manufacturer} ${devicetype} (${name})" >> "${tfile}"
- case "${atype}" in
- FXO)
- dahdi_gen_fxo_config $aport >> "${tfile}"
- ;;
- FXS)
- dahdi_gen_fxs_config $aport >> "${tfile}"
- ;;
- esac
- ;;
- esac
- done
-
- [ -n "${span}" ] && dahdi_conf_span "${span}" "${type}" "${manufacturer} ${devicetype} (${name})" "${isdnport}" "${basechan}" >> "${tfile}"
-
- echo -e "\nloadzone = ${DAHDI_ZONE}\ndefaultzone = ${DAHDI_ZONE}\n## END OF AUTOCONFIGURED FILE ##" >> "${tfile}"
-
- exec 3<&-
-
- rm -f "${sfile}"
- mv /etc/dahdi/system.conf /etc/dahdi/system.conf.bck
- mv "${tfile}" /etc/dahdi/system.conf
-}
-
-start() {
- dahdi_load_modules
-
- if [ ! -r /dev/dahdi/ctl ]; then
- eerror "No DAHDI compatible cards detected."
- return 1
- fi
-
- ebegin "Generating DAHDI Configuration"
- dahdi_gen_config
- eend $?
-}
-
-stop() {
- dahdi_module_unload dahdi
-}
projects / gentoo.git / commitdiff