Relax the duplicate-environment restriction for targets so that it's okay if the...

git-svn-id: http://scons.tigris.org/svn/scons/trunk@859 fdb21ef1-2011-0410-befe-b5e4ea1792b1

diff --git a/src/CHANGES.txt b/src/CHANGES.txt
index a4e4c6097b6f4a72c33899377e2492103d8533de..391d11b6c0d26ee13ffa3820615b86111b3fa8be 100644 (file)
--- a/src/CHANGES.txt
+++ b/src/CHANGES.txt
@@ -61,6 +61,12 @@ RELEASE 0.95 - XXX
   - Make the message about ignoring a missing SConscript file into a
     suppressable Warning, not a hard-coded sys.stderr.write().
 
+  - If a builder can be called multiple times for a target (because
+    the sources and overrides are identical, or it's a builder with the
+    "multi" flag set), allow the builder to be called through multiple
+    environments so long as the builders have the same signature for
+    the environments in questions (that is, they're the same action).
+
   From Steven Knight:
 
   - Fix EnsureSConsVersion() so it checks against the SCons version,

diff --git a/src/engine/SCons/Builder.py b/src/engine/SCons/Builder.py
index 17d661ca21b39d8ee3088e683caa128a40fc71ff..837229223493c0cf0bbc51699be8d4edec45993b 100644 (file)
--- a/src/engine/SCons/Builder.py
+++ b/src/engine/SCons/Builder.py
@@ -164,9 +164,19 @@ def _init_nodes(builder, env, overrides, tlist, slist):
             raise UserError, "Multiple ways to build the same target were specified for: %s" % str(t)
         if t.has_builder():
             if t.env != env:
-                raise UserError, "Two different environments were specified for the same target: %s"%str(t)
+                t_contents = t.builder.action.get_contents(tlist, slist, t.env)
+                contents = t.builder.action.get_contents(tlist, slist, env)
+
+                if t_contents == contents:
+                    SCons.Warnings.warn(SCons.Warnings.DuplicateEnvironmentWarning,
+                                        "Two different environments were specified for target %s,\n\tbut they appear to have the same action: %s"%(str(t), t.builder.action.strfunction(tlist, slist, t.env)))
+
+                else:
+                    raise UserError, "Two environments with different actions were specified for the same target: %s"%str(t)
+
             elif t.overrides != overrides:
                 raise UserError, "Two different sets of overrides were specified for the same target: %s"%str(t)
+
             elif builder.scanner and t.target_scanner and builder.scanner != t.target_scanner:
                 raise UserError, "Two different scanners were specified for the same target: %s"%str(t)
 

diff --git a/src/engine/SCons/Script/__init__.py b/src/engine/SCons/Script/__init__.py
index 0e56214139d02c2a9a070e99fcdd87db749f743b..ac05f3cc2698d02c0641c57102281c8e3ca8ba98 100644 (file)
--- a/src/engine/SCons/Script/__init__.py
+++ b/src/engine/SCons/Script/__init__.py
@@ -709,6 +709,7 @@ def _main(args, parser):
     SCons.Warnings._warningOut = _scons_internal_warning
     SCons.Warnings.enableWarningClass(SCons.Warnings.CorruptSConsignWarning)
     SCons.Warnings.enableWarningClass(SCons.Warnings.DeprecatedWarning)
+    SCons.Warnings.enableWarningClass(SCons.Warnings.DuplicateEnvironmentWarning)
     SCons.Warnings.enableWarningClass(SCons.Warnings.MissingSConscriptWarning)
     SCons.Warnings.enableWarningClass(SCons.Warnings.NoParallelSupportWarning)
 

diff --git a/src/engine/SCons/Warnings.py b/src/engine/SCons/Warnings.py
index 642683033878e5b0363e6f258290e06faea08457..2e2e525d0c59d647a9e089b304773032873651b3 100644 (file)
--- a/src/engine/SCons/Warnings.py
+++ b/src/engine/SCons/Warnings.py
@@ -48,6 +48,9 @@ class DependencyWarning(Warning):
 class DeprecatedWarning(Warning):
     pass
 
+class DuplicateEnvironmentWarning(Warning):
+    pass
+
 class MissingSConscriptWarning(Warning):
     pass
 

diff --git a/test/multi.py b/test/multi.py
index 1974a5f133a71f845722f42cb5411c70f29b44c8..9920cbc2b74a4099352e390da4fbb7df65ef9e82 100644 (file)
--- a/test/multi.py
+++ b/test/multi.py
@@ -24,11 +24,21 @@
 
 __revision__ = "__FILE__ __REVISION__ __DATE__ __DEVELOPER__"
 
+"""
+Test various cases where a target is "built" by multiple builder calls.
+"""
+
 import TestSCons
 import os.path
 
 test = TestSCons.TestSCons()
 
+
+#
+# A builder with "multi" set can be called multiple times and
+# the source files are added to the list.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     file = open(str(target[0]), 'wb')
@@ -37,17 +47,21 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = 'foo.out', source = 'foo.in')
-env.B(target = 'foo.out', source = 'bar.in')
+env.B(target = 'file1.out', source = 'file1a.in')
+env.B(target = 'file1.out', source = 'file1b.in')
 """)
 
-test.write('foo.in', 'foo.in\n')
-test.write('bar.in', 'bar.in\n')
+test.write('file1a.in', 'file1a.in\n')
+test.write('file1b.in', 'file1b.in\n')
+
+test.run(arguments='file1.out')
 
-test.run(arguments='foo.out')
+test.fail_test(not test.read('file1.out') == 'file1a.in\nfile1b.in\n')
 
-test.fail_test(not os.path.exists(test.workpath('foo.out')))
-test.fail_test(not test.read('foo.out') == 'foo.in\nbar.in\n')
+
+#
+# A builder with "multi" not set generates an error on the second call.
+#
 
 test.write('SConstruct', """
 def build(env, target, source):
@@ -57,17 +71,26 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=0)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = 'foo.out', source = 'foo.in')
-env.B(target = 'foo.out', source = 'bar.in')
+env.B(target = 'file2.out', source = 'file2a.in')
+env.B(target = 'file2.out', source = 'file2b.in')
 """)
 
-test.run(arguments='foo.out', 
+test.write('file2a.in', 'file2a.in\n')
+test.write('file2b.in', 'file2b.in\n')
+
+test.run(arguments='file2.out', 
          status=2, 
          stderr="""
-scons: *** Multiple ways to build the same target were specified for: foo.out
+scons: *** Multiple ways to build the same target were specified for: file2.out
 File "SConstruct", line 10, in ?
 """)
 
+
+#
+# The second call generates an error if the two calls have different
+# overrides.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     file = open(str(target[0]), 'wb')
@@ -76,17 +99,25 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = 'foo.out', source = 'foo.in', foo=1)
-env.B(target = 'foo.out', source = 'bar.in', foo=2)
+env.B(target = 'file3.out', source = 'file3a.in', foo=1)
+env.B(target = 'file3.out', source = 'file3b.in', foo=2)
 """)
 
-test.run(arguments='foo.out', 
+test.write('file3a.in', 'file3a.in\n')
+test.write('file3b.in', 'file3b.in\n')
+
+test.run(arguments='file3.out', 
          status=2, 
          stderr="""
-scons: *** Two different sets of overrides were specified for the same target: foo.out
+scons: *** Two different sets of overrides were specified for the same target: file3.out
 File "SConstruct", line 10, in ?
 """)
 
+
+#
+# Everything works if the two calls have the same overrides.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     file = open(str(target[0]), 'wb')
@@ -95,18 +126,83 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env2 = env.Copy(CCFLAGS='foo')
-env.B(target = 'foo.out', source = 'foo.in')
-env2.B(target = 'foo.out', source = 'bar.in')
+env.B(target = 'file4.out', source = 'file4a.in', foo=3)
+env.B(target = 'file4.out', source = 'file4b.in', foo=3)
 """)
 
-test.run(arguments='foo.out', 
-         status=2, 
+test.write('file4a.in', 'file4a.in\n')
+test.write('file4b.in', 'file4b.in\n')
+
+test.run(arguments='file4.out')
+
+test.fail_test(not test.read('file4.out') == 'file4a.in\nfile4b.in\n')
+
+
+#
+# Two different environments can be used for the same target, so long
+# as the actions have the same signature; a warning is generated.
+#
+
+test.write('SConstruct', """
+def build(env, target, source):
+    file = open(str(target[0]), 'wb')
+    for s in source:
+        file.write(open(str(s), 'rb').read())
+
+B = Builder(action=build, multi=1)
+env = Environment(BUILDERS = { 'B' : B })
+env2 = env.Copy(DIFFERENT_VARIABLE = 'true')
+env.B(target = 'file5.out', source = 'file5a.in')
+env2.B(target = 'file5.out', source = 'file5b.in')
+""")
+
+test.write('file5a.in', 'file5a.in\n')
+test.write('file5b.in', 'file5b.in\n')
+
+test.run(arguments='file5.out', 
          stderr="""
-scons: *** Two different environments were specified for the same target: foo.out
+scons: warning: Two different environments were specified for target file5.out,
+       but they appear to have the same action: build("file5.out", "file5b.in")
 File "SConstruct", line 11, in ?
 """)
 
+test.fail_test(not test.read('file5.out') == 'file5a.in\nfile5b.in\n')
+
+
+#
+# Environments with actions that have different signatures generate
+# an error.
+#
+
+test.write('SConstruct', """
+def build(env, target, source):
+    file = open(str(target[0]), 'wb')
+    for s in source:
+        file.write(open(str(s), 'rb').read())
+
+B = Builder(action=Action(build, varlist=['XXX']), multi=1)
+env = Environment(BUILDERS = { 'B' : B }, XXX = 'foo')
+env2 = env.Copy(XXX = 'var')
+env.B(target = 'file6.out', source = 'file6a.in')
+env2.B(target = 'file6.out', source = 'file6b.in')
+""")
+
+test.write('file6a.in', 'file6a.in\n')
+test.write('file6b.in', 'file6b.in\n')
+
+test.run(arguments='file6.out', 
+         status=2,
+         stderr="""
+scons: *** Two environments with different actions were specified for the same target: file6.out
+File "SConstruct", line 11, in ?
+""")
+
+
+#
+# A builder without "multi" set can still be called multiple times
+# if the calls are the same.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     file = open(str(target[0]), 'wb')
@@ -115,12 +211,21 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=0)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = 'foo.out', source = 'foo.in')
-env.B(target = 'foo.out', source = 'foo.in')
+env.B(target = 'file7.out', source = 'file7.in')
+env.B(target = 'file7.out', source = 'file7.in')
 """)
 
-test.run(arguments='foo.out')
-test.fail_test(not test.read('foo.out') == 'foo.in\n')
+test.write('file7.in', 'file7.in\n')
+
+test.run(arguments='file7.out')
+
+test.fail_test(not test.read('file7.out') == 'file7.in\n')
+
+
+#
+# Trying to call a target with two different "multi" builders
+# generates an error.
+#
 
 test.write('SConstruct', """
 def build(env, target, source):
@@ -134,17 +239,26 @@ def build2(env, target, source):
 B = Builder(action=build, multi=1)
 C = Builder(action=build2, multi=1)
 env = Environment(BUILDERS = { 'B' : B, 'C' : C })
-env.B(target = 'foo.out', source = 'foo.in')
-env.C(target = 'foo.out', source = 'bar.in')
+env.B(target = 'file8.out', source = 'file8.in')
+env.C(target = 'file8.out', source = 'file8.in')
 """)
 
-test.run(arguments='foo.out', 
+test.write('file8a.in', 'file8a.in\n')
+test.write('file8b.in', 'file8b.in\n')
+
+test.run(arguments='file8.out', 
          status=2, 
          stderr="""
-scons: *** Two different builders (B and C) were specified for the same target: foo.out
+scons: *** Two different builders (B and C) were specified for the same target: file8.out
 File "SConstruct", line 14, in ?
 """)
 
+
+#
+# A "multi" builder can be called multiple times with the same target list
+# if everything is identical.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     for t in target:
@@ -154,15 +268,25 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = ['foo.out', 'bar.out'], source = 'foo.in')
-env.B(target = ['foo.out', 'bar.out'], source = 'bar.in')
+env.B(target = ['file9a.out', 'file9b.out'], source = 'file9a.in')
+env.B(target = ['file9a.out', 'file9b.out'], source = 'file9b.in')
 """)
 
-test.run(arguments='bar.out')
-test.fail_test(not os.path.exists(test.workpath('bar.out')))
-test.fail_test(not test.read('bar.out') == 'foo.in\nbar.in\n')
-test.fail_test(not os.path.exists(test.workpath('foo.out')))
-test.fail_test(not test.read('foo.out') == 'foo.in\nbar.in\n')
+test.write('file9a.in', 'file9a.in\n')
+test.write('file9b.in', 'file9b.in\n')
+
+test.run(arguments='file9b.out')
+
+test.fail_test(not test.read('file9a.out') == 'file9a.in\nfile9b.in\n')
+test.fail_test(not test.read('file9b.out') == 'file9a.in\nfile9b.in\n')
+
+
+#
+# A "multi" builder can NOT be called multiple times with target lists
+# that have different orders.  This is intentional; the order of the
+# targets matter to the builder because the build command can contain
+# things like ${TARGET[0]}.
+#
 
 test.write('SConstruct', """
 def build(env, target, source):
@@ -173,22 +297,27 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = ['foo.out', 'bar.out'], source = 'foo.in')
-env.B(target = ['bar.out', 'foo.out'], source = 'bar.in')
+env.B(target = ['file10a.out', 'file10b.out'], source = 'file10.in')
+env.B(target = ['file10b.out', 'file10a.out'], source = 'file10.in')
 """)
 
-# This is intentional. The order of the targets matter to the
-# builder because the build command can contain things like ${TARGET[0]}:
-test.run(arguments='foo.out', 
+test.write('file10.in', 'file10.in\n')
+
+test.run(arguments='file10.out', 
          status=2, 
          stderr="""
-scons: *** Two different target sets have a target in common: bar.out
+scons: *** Two different target sets have a target in common: file10b.out
 File "SConstruct", line 11, in ?
 """)
 
-# XXX It would be nice if the following two tests could be made to 
-# work by executing the action once for each unique set of
-# targets. This would make it simple to deal with PDB files on Windows like so:
+
+#
+# A target file can't be in two different target lists.
+#
+
+# XXX It would be nice if the following two tests could be made to work
+# by executing the action once for each unique set of targets. This
+# would make it simple to deal with PDB files on Windows like so:
 #
 #     env.Object(['foo.obj', 'vc60.pdb'], 'foo.c')
 #     env.Object(['bar.obj', 'vc60.pdb'], 'bar.c')
@@ -202,17 +331,25 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = ['foo.out', 'bar.out'], source = 'foo.in')
-env.B(target = ['bar.out', 'blat.out'], source = 'bar.in')
+env.B(target = ['file11a.out', 'file11b.out'], source = 'file11a.in')
+env.B(target = ['file11b.out', 'file11c.out'], source = 'file11b.in')
 """)
 
-test.run(arguments='foo.out', 
+test.write('file11a.in', 'file11a.in\n')
+test.write('file11b.in', 'file11b.in\n')
+
+test.run(arguments='file11.out', 
          status=2, 
          stderr="""
-scons: *** Two different target sets have a target in common: bar.out
+scons: *** Two different target sets have a target in common: file11b.out
 File "SConstruct", line 11, in ?
 """)
 
+
+#
+# A target file can't be a lone target and in a list.
+#
+
 test.write('SConstruct', """
 def build(env, target, source):
     for t in target:
@@ -222,18 +359,20 @@ def build(env, target, source):
 
 B = Builder(action=build, multi=1)
 env = Environment(BUILDERS = { 'B' : B })
-env.B(target = ['foo.out', 'bar.out'], source = 'foo.in')
-env.B(target = 'foo.out', source = 'bar.in')
+env.B(target = ['file12a.out', 'file12b.out'], source = 'file12a.in')
+env.B(target = 'file12a.out', source = 'file12b.in')
 """)
 
-test.run(arguments='foo.out', 
+test.write('file12a.in', 'file12a.in\n')
+test.write('file12b.in', 'file12b.in\n')
+
+test.run(arguments='file12.out', 
          status=2, 
          stderr="""
-scons: *** Two different builders (ListBuilder(B) and B) were specified for the same target: foo.out
+scons: *** Two different builders (ListBuilder(B) and B) were specified for the same target: file12a.out
 File "SConstruct", line 11, in ?
 """)
 
 
 
-
 test.pass_test()

diff --git a/test/option--warn.py b/test/option--warn.py
index c8e16a97e311eb0596bdb48ffb104f85e08f1caa..ac510bcca76ad46fe4a43d4f98e1e182cf2ed7ae 100644 (file)
--- a/test/option--warn.py
+++ b/test/option--warn.py
@@ -52,6 +52,8 @@ test = TestSCons.TestSCons(match = TestCmd.match_re_dotall)
 #File "SConstruct", line 2, in \?
 #""")
 
+
+
 test.write("SConstruct","""
 def build(target, source, env):
     pass
@@ -82,6 +84,8 @@ scons: warning: No dependency generated for file: not_there\.h \(included from:
 File ".+", line \d+, in .+
 """)
 
+
+
 test.write("SConstruct", """\
 def build(target, source, env):
     pass
@@ -99,4 +103,41 @@ File ".+", line \d+, in .+
 
 test.run(arguments = '--warn=no-missing-sconscript .', stderr = "")
 
+
+
+test.write('SConstruct', """
+def build(env, target, source):
+    file = open(str(target[0]), 'wb')
+    for s in source:
+        file.write(open(str(s), 'rb').read())
+
+B = Builder(action=build, multi=1)
+env = Environment(BUILDERS = { 'B' : B })
+env2 = env.Copy(DIFFERENT_VARIABLE = 'true')
+env.B(target = 'file1.out', source = 'file1a.in')
+env2.B(target = 'file1.out', source = 'file1b.in')
+""")
+
+test.write('file1a.in', 'file1a.in\n')
+test.write('file1b.in', 'file1b.in\n')
+
+test.run(arguments='file1.out', 
+         stderr=r"""
+scons: warning: Two different environments were specified for target file1.out,
+       but they appear to have the same action: build\("file1.out", "file1b.in"\)
+File "SConstruct", line \d+, in .+
+""")
+
+test.fail_test(not test.read('file1.out') == 'file1a.in\nfile1b.in\n')
+
+test.run(arguments='--warn=duplicate-environment file1.out', 
+         stderr=r"""
+scons: warning: Two different environments were specified for target file1.out,
+       but they appear to have the same action: build\("file1.out", "file1b.in"\)
+File "SConstruct", line \d+, in .+
+""")
+
+test.run(arguments='--warn=no-duplicate-environment file1.out')
+
+
 test.pass_test()