--- /dev/null
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI="4"
+
+inherit toolchain-funcs eutils systemd
+
+DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
+HOMEPAGE="http://hostap.epitest.fi"
+SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
+
+LICENSE="|| ( GPL-2 BSD )"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~mips ~ppc ~x86"
+IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda"
+
+DEPEND="ssl? ( dev-libs/openssl[-bindist] )
+ kernel_linux? (
+ dev-libs/libnl:3
+ crda? ( net-wireless/crda )
+ )
+ netlink? ( net-libs/libnfnetlink )
+ sqlite? ( >=dev-db/sqlite-3 )"
+
+RDEPEND="${DEPEND}"
+
+S="${S}/${PN}"
+
+src_prepare() {
+ sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
+ "${S}/hostapd.conf" || die
+}
+
+src_configure() {
+ local CONFIG="${S}/.config"
+
+ # toolchain setup
+ echo "CC = $(tc-getCC)" > ${CONFIG}
+
+ # EAP authentication methods
+ echo "CONFIG_EAP=y" >> ${CONFIG}
+ echo "CONFIG_ERP=y" >> ${CONFIG}
+ echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
+
+ if use ssl; then
+ # SSL authentication methods
+ echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
+ echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
+ echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
+ echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
+ echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
+ echo "CONFIG_TLSV11=y" >> ${CONFIG}
+ echo "CONFIG_TLSV12=y" >> ${CONFIG}
+ fi
+
+ if use wps; then
+ # Enable Wi-Fi Protected Setup
+ echo "CONFIG_WPS=y" >> ${CONFIG}
+ echo "CONFIG_WPS2=y" >> ${CONFIG}
+ echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
+ echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
+ einfo "Enabling Wi-Fi Protected Setup support"
+ fi
+
+ echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
+ echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
+ echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
+ echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
+ echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
+ echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
+ echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
+ echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
+ echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
+ echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
+ echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
+ echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
+ echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
+
+ einfo "Enabling drivers: "
+
+ # drivers
+ echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
+ einfo " HostAP driver enabled"
+ echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
+ einfo " Wired driver enabled"
+ echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG}
+ einfo " Prism54 driver enabled"
+ echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
+ einfo " None driver enabled"
+
+ einfo " nl80211 driver enabled"
+ echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
+
+ # epoll
+ echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
+
+ # misc
+ echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
+ echo "CONFIG_PKCS12=y" >> ${CONFIG}
+ echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
+ echo "CONFIG_IAPP=y" >> ${CONFIG}
+ echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
+ echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
+ echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
+ echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
+ echo "CONFIG_PEERKEY=y" >> ${CONFIG}
+ echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
+ echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
+ echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
+ echo "CONFIG_HS20=y" >> ${CONFIG}
+ echo "CONFIG_WNM=y" >> ${CONFIG}
+ echo "CONFIG_FST=y" >> ${CONFIG}
+ echo "CONFIG_FST_TEST=y" >> ${CONFIG}
+ echo "CONFIG_ACS=y" >> ${CONFIG}
+
+ if use netlink; then
+ # Netlink support
+ echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
+ fi
+
+ if use ipv6; then
+ # IPv6 support
+ echo "CONFIG_IPV6=y" >> ${CONFIG}
+ fi
+
+ if use sqlite; then
+ # Sqlite support
+ echo "CONFIG_SQLITE=y" >> ${CONFIG}
+ fi
+
+ # If we are using libnl 2.0 and above, enable support for it
+ # Removed for now, since the 3.2 version is broken, and we don't
+ # support it.
+ if has_version ">=dev-libs/libnl-3.2"; then
+ echo "CONFIG_LIBNL32=y" >> .config
+ fi
+
+ # TODO: Add support for BSD drivers
+
+ default_src_configure
+}
+
+src_compile() {
+ emake V=1
+
+ if use ssl; then
+ emake V=1 nt_password_hash
+ emake V=1 hlr_auc_gw
+ fi
+}
+
+src_install() {
+ insinto /etc/${PN}
+ doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
+
+ fperms -R 600 /etc/${PN}
+
+ dosbin ${PN}
+ dobin ${PN}_cli
+
+ use ssl && dobin nt_password_hash hlr_auc_gw
+
+ newinitd "${FILESDIR}"/${PN}-init.d ${PN}
+ newconfd "${FILESDIR}"/${PN}-conf.d ${PN}
+ systemd_dounit "${FILESDIR}"/${PN}.service
+
+ doman ${PN}{.8,_cli.1}
+
+ dodoc ChangeLog README
+ use wps && dodoc README-WPS
+
+ docinto examples
+ dodoc wired.conf
+
+ if use logwatch; then
+ insinto /etc/log.d/conf/services/
+ doins logwatch/${PN}.conf
+
+ exeinto /etc/log.d/scripts/services/
+ doexe logwatch/${PN}
+ fi
+}
+
+pkg_postinst() {
+ einfo
+ einfo "If you are running openRC you need to follow this instructions:"
+ einfo "In order to use ${PN} you need to set up your wireless card"
+ einfo "for master mode in /etc/conf.d/net and then start"
+ einfo "/etc/init.d/${PN}."
+ einfo
+ einfo "Example configuration:"
+ einfo
+ einfo "config_wlan0=( \"192.168.1.1/24\" )"
+ einfo "channel_wlan0=\"6\""
+ einfo "essid_wlan0=\"test\""
+ einfo "mode_wlan0=\"master\""
+ einfo
+ #if [ -e "${KV_DIR}"/net/mac80211 ]; then
+ # einfo "This package now compiles against the headers installed by"
+ # einfo "the kernel source for the mac80211 driver. You should "
+ # einfo "re-emerge ${PN} after upgrading your kernel source."
+ #fi
+
+ if use wps; then
+ einfo "You have enabled Wi-Fi Protected Setup support, please"
+ einfo "read the README-WPS file in /usr/share/doc/${P}"
+ einfo "for info on how to use WPS"
+ fi
+}
projects / gentoo.git / commitdiff