------BEGIN PGP SIGNED MESSAGE-----
-Hash: SHA1
-
MD5 33c80f7a9fffd5cb8e7729b34414807f ChangeLog 11681
-MD5 d3afaf9141525a706f8c077f66918670 files/10.11.14/Makefile.config 17308
-MD5 be5dafab017b8247e09f643e9798441e files/10.11.14/Makefile.svga 17374
-MD5 d3afaf9141525a706f8c077f66918670 files/10.11.5/Makefile.config 17308
-MD5 be5dafab017b8247e09f643e9798441e files/10.11.5/Makefile.svga 17374
-MD5 943662580b449abb996444e348c48298 files/9.12/Makefile.config 11635
-MD5 6735fc271948c349d02f59361b4c373e files/digest-netpbm-10.11.14 65
-MD5 15efd1a3748d1c9b0a9d9e88374bcbbc files/digest-netpbm-10.11.15 65
-MD5 19ce2b4d396523dcbcb1e415d4bdb8c9 files/digest-netpbm-10.11.5-r3 64
-MD5 74da89b4a373ba2116b4ba5d8e9d31a0 files/digest-netpbm-10.18.7 64
-MD5 c06a062a991dc2b0f8bd88ac44a1e5e5 files/digest-netpbm-10.19 62
MD5 40a3370de6ed591305e4585ffbc605bd files/digest-netpbm-10.20 62
MD5 40a3370de6ed591305e4585ffbc605bd files/digest-netpbm-10.20-r1 62
MD5 c6c3222383568021fbbdc34114b6f279 files/digest-netpbm-10.28 62
MD5 8c4a20ca06c83687436b8cb75917d5f1 files/digest-netpbm-10.29 62
MD5 e03ba0a74da10891ecaa41fb86191275 files/digest-netpbm-10.29-r1 136
MD5 af57721491b0a7cd11ccba542d8e20c6 files/digest-netpbm-10.30 136
-MD5 b38412609f4a8671a787d303b8d2b876 files/digest-netpbm-9.12-r4 61
MD5 3e364cbe32c6c5bd2f329b8dbcf604d5 files/netpbm-10.29-anytopnm.patch 1562
MD5 102062d84b1750c991d13e5528a9420b files/netpbm-10.29-build.patch 2278
MD5 103e8f6f6474dcc4b17ee049111bc3f6 files/netpbm-10.29-infinity.patch 5840
MD5 ffa6c02e94b0dfc779d129cd7e09e928 files/netpbm-10.30-build.patch 1886
MD5 ef9c07e7cbf6b830f8dd61e59fb0a34b files/netpbm-dSAFER.patch 818
MD5 e1f6c302199a36c1be4ecf1654be9bac metadata.xml 224
-MD5 e356185ae787b984b1502205834c74f4 netpbm-10.11.14.ebuild 2010
-MD5 bc37890e535cf2fcbe66043b92491072 netpbm-10.11.15.ebuild 2009
-MD5 28ca860ea5e88498171e08bc22685c16 netpbm-10.11.5-r3.ebuild 1567
-MD5 323b69ef703b303e44f51be5b762df65 netpbm-10.18.7.ebuild 2009
-MD5 fc5b2c41ccdc4c486d3f7b65771753b5 netpbm-10.19.ebuild 1739
MD5 e1d7f1307e675fbbfc3a07f2539c0708 netpbm-10.20-r1.ebuild 2442
MD5 a936cf1a2061cebff85f7a54e12d6422 netpbm-10.20.ebuild 2273
MD5 4ff1d95265184a7c760d4748a4cb1beb netpbm-10.28.ebuild 2460
MD5 4b1a6bc24bd0b85afb5756e7c1e218e8 netpbm-10.29-r1.ebuild 2937
MD5 44a56191027bdda13f3bd51f336a971a netpbm-10.29.ebuild 2423
MD5 f0a39575150fdc940c3241ebbbf94e10 netpbm-10.30.ebuild 2752
-MD5 f17a1fb0d30a71452e534e435c7295b2 netpbm-9.12-r4.ebuild 1343
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.4.1 (GNU/Linux)
-
-iD8DBQFDWNwxEZCkKN40op4RAqMkAJ9eE7A7+uQ0u9pfrZlTuGzAaxN0YgCdF/JH
-YF8BQ3q+74Y6K81gKGLPkyM=
-=pt7D
------END PGP SIGNATURE-----
+++ /dev/null
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file. So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running. But when we
-# build a build tool such as Libopt, it is meant to run only on the same
-# system on which the Make is running. The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG =
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time. This is typically done with a -R or --rpath linker
-# option. Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are. A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM. Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved. He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC). On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed. Without position independent code, the library
-# loader may have to patch addresses into the executable text. On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory. But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon). So it
-# needs its own private real page frame. In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without. 2001.06.02.
-
-CFLAGS_SHLIB =
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc". On typical systems, this serves no purpose. On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one. But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on
-# SCO OpenServer, he gets the following error message with -lc:
-#
-# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o);
-# fatal error: relocations remain against allocatable but non-writable
-# section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live. The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway. ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library. If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include). If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed. In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables. This does NOT affect
-# where the Netpbm installer installs the libraries. A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH =
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library. See above. If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm,
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library. See above. If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library. If your Tiff library references a dynamic JPEG
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build. Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library. See above. If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER =
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library. See above. You need it to build
-# anything that needs the PNG library (see above). If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR =
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console. It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR =
-
-#LINUXSVGALIB_DIR =
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. If you don't
-# want any network functions, make it NONE. The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD =
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS =
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions. The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is
-#selected above. All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries. Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have. It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system. Traditionally, it's
-#just "lib", as in libc or libpbm. On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available. The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms. We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad). We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll". So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type. E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
+++ /dev/null
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file. So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running. But when we
-# build a build tool such as Libopt, it is meant to run only on the same
-# system on which the Make is running. The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG =
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time. This is typically done with a -R or --rpath linker
-# option. Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are. A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM. Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved. He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC). On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed. Without position independent code, the library
-# loader may have to patch addresses into the executable text. On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory. But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon). So it
-# needs its own private real page frame. In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without. 2001.06.02.
-
-CFLAGS_SHLIB =
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc". On typical systems, this serves no purpose. On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one. But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on
-# SCO OpenServer, he gets the following error message with -lc:
-#
-# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o);
-# fatal error: relocations remain against allocatable but non-writable
-# section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live. The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway. ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library. If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include). If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed. In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables. This does NOT affect
-# where the Netpbm installer installs the libraries. A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH =
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library. See above. If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm,
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library. See above. If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library. If your Tiff library references a dynamic JPEG
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build. Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library. See above. If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER =
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library. See above. You need it to build
-# anything that needs the PNG library (see above). If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR =
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console. It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR =
-
-#LINUXSVGALIB_DIR =
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. If you don't
-# want any network functions, make it NONE. The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD =
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS =
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions. The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is
-#selected above. All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries. Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have. It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system. Traditionally, it's
-#just "lib", as in libc or libpbm. On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available. The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms. We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad). We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll". So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type. E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
-LINUXSVGAHDR_DIR = /usr/include
-LINUXSVGALIB = /usr/lib/libvga.so
+++ /dev/null
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file. So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running. But when we
-# build a build tool such as Libopt, it is meant to run only on the same
-# system on which the Make is running. The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG =
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time. This is typically done with a -R or --rpath linker
-# option. Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are. A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM. Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved. He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC). On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed. Without position independent code, the library
-# loader may have to patch addresses into the executable text. On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory. But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon). So it
-# needs its own private real page frame. In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without. 2001.06.02.
-
-CFLAGS_SHLIB =
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc". On typical systems, this serves no purpose. On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one. But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on
-# SCO OpenServer, he gets the following error message with -lc:
-#
-# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o);
-# fatal error: relocations remain against allocatable but non-writable
-# section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live. The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway. ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library. If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include). If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed. In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables. This does NOT affect
-# where the Netpbm installer installs the libraries. A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH =
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library. See above. If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm,
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library. See above. If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library. If your Tiff library references a dynamic JPEG
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build. Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library. See above. If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER =
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library. See above. You need it to build
-# anything that needs the PNG library (see above). If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR =
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console. It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR =
-
-#LINUXSVGALIB_DIR =
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. If you don't
-# want any network functions, make it NONE. The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD =
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS =
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions. The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is
-#selected above. All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries. Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have. It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system. Traditionally, it's
-#just "lib", as in libc or libpbm. On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available. The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms. We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad). We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll". So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type. E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
+++ /dev/null
-####This file was automatically created by 'configure.'
-####Many variables are set twice -- a generic setting, then
-####a system-specific override at the bottom of the file.
-####
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file. So it's normally "..".
-
-DEFAULT_TARGET = nonmerge
-#DEFAULT_TARGET = merge
-
-# Fiasco has some special requirements that make it fail to compile on
-# some systems, and since it isn't very important, just set this to "N"
-# and skip it on those systems unless you want to debug it and fix it.
-# OpenBSD:
-#BUILD_FIASCO = N
-BUILD_FIASCO = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#CC = gcc
-# Note that 'cc' is usually an alias for whatever is the main compiler
-# on a system, e.g. the GNU Compiler on Linux.
-CC = cc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-# CC and LD are for building the Netpbm programs, which are not necessarily
-# intended to run on the same system on which Make is running. But when we
-# build a build tool such as Libopt, it is meant to run only on the same
-# system on which the Make is running. The variables below define programs
-# to use to compile and link build tools.
-CC_FOR_BUILD = $(CC)
-LD_FOR_BUILD = $(LD)
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-INSTALL = $(SRCDIR)/buildtools/install.sh
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = $(SRCDIR)/buildtools/installosf
-#Red Hat Linux:
-#INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-#STRIPFLAG =
-
-SYMLINK = ln -s
-# At least some Windows environments don't have any concept of symbolic
-# links, but direct copies are usually a passable alternative.
-#SYMLINK = cp
-
-#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the
-#pointer man pages are installed (ready to nroff, or ready to cat).
-#A pointer man pages is just a single-paragraph pages that tells you there is
-#no man page for the program, to look at the HTML documentation instead.
-MANPAGE_FORMAT = nroff
-#MANPAGE_FORMAT = cat
-
-AR = ar
-RANLIB = ranlib
-# IRIX, SCO don't have Ranlib:
-#RANLIB = true
-LEX = flex
-# Solaris:
-# LEX = flex -e
-# Or just skip parts that need Lex:
-# LEX =
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-#CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations
-# The merged programs have a main_XXX subroutine instead of main(),
-# which would cause a warning with -Wmissing-declarations
-#CFLAGS_MERGE = -Wno-missing-declarations
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32
-#AIX:
-#CFLAGS= -O3 -D_ALL_SOURCE
-#HP-UX:
-#CFLAGS= -O3 -fPIC
-
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-# On some systems you have to build into an executable the list of
-# directories where its dynamically linked libraries can be found at
-# run time. This is typically done with a -R or --rpath linker
-# option. Even on systems that don't require it, you might prefer to do
-# that rather than set up environment variables or configuration files
-# to tell the system where the libraries are. A "Y" here means to put
-# the directory information in the executable at link time.
-
-NEED_RUNTIME_PATH = N
-# Solaris, SunOS, NetBSD:
-#NEED_RUNTIME_PATH = Y
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary
-# to keep from finding an ancient system libjpeg.so that isn't compatible with
-# NetPBM. Michael Long found that /usr/local/lib is not in the default
-# search path, or not soon enough, and he was getting an old libjpeg that
-# caused all the jpeg symbol references to be unresolved. He had installed
-# a new libjpeg in /usr/local/lib.
-#LDFLAGS = -call_shared -oldstyle_liblookup -L/usr/local/lib
-#AIX:
-#LDFLAGS=-L /usr/pubsw/lib
-#HP-UX:
-#LDFLAGS = -Wl,+b,/usr/pubsw/lib
-#FreeBSD:
-#LDFLAGS = -L/usr/local/lib
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld, SCO:
-# These systems have no soname option.
-#LDSHLIB = -shared
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-#AIX:
-#LDSHLIB = ???
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC). On newer systems,
-# it isn't necessary, but can save real memory at the expense of
-# execution speed. Without position independent code, the library
-# loader may have to patch addresses into the executable text. On an
-# older system, this would cause a program crash because the loader
-# would be writing into read-only shared memory. But on newer
-# systems, the system silently creates a private mapping of the page
-# or segment being modified (the "copy on write" phenomenon). So it
-# needs its own private real page frame. In one experiment, A second
-# copy of Pbmtext used 16K less real memory when built with -fpic than
-# when built without. 2001.06.02.
-
-CFLAGS_SHLIB =
-# Solaris or SunOS with gcc, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-#CFLAGS_SHLIB = -fPIC
-# Sun compiler:
-#CFLAGS_SHLIB = -Kpic
-#CFLAGS_SHLIB = -KPIC
-
-# SHLIB_CLIB is the link option to include the C library in a shared library,
-# normally "-lc". On typical systems, this serves no purpose. On some,
-# though, it causes information about which C library to use to be recorded
-# in the shared library and thus choose the correct library among several or
-# avoid using an incompatible one. But on some systems, the link fails.
-# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on
-# SCO OpenServer, he gets the following error message with -lc:
-#
-# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o);
-# fatal error: relocations remain against allocatable but non-writable
-# section: ; .text
-
-SHLIB_CLIB = -lc
-# SCO:
-SHLIB_CLIB =
-
-# The following variables tell where your various libraries on which
-# Netpbm depends live. The LIBxxx variable is a full file
-# specification of the link library (not necessarily the library used
-# at run time). e.g. "/usr/local/lib/graphics/libpng.so". It usually
-# doesn't matter if the library prefix and suffix are right -- you can
-# use "lib" and ".so" or ".a" regardless of what your system actually
-# uses because these just turn into "-L" and "-l" linker options
-# anyway. ".a" implies a static library for some purposes, though.
-# If you don't have the library in question, use a value of NONE for
-# LIBxxx and the build will simply skip the programs that require that
-# library. If the library is in your linker's (or the Netpbm build's)
-# default search path, leave off the directory part, e.g. "libpng.so".
-
-# The xxxHDR_DIR variable is the directory in which the interface
-# headers for the library live (e.g. /usr/include). If they are in your
-# compiler's default search path, set this variable to null.
-
-# This is where the Netpbm shared libraries will reside when Netpbm is
-# fully installed. In some configurations, the Netpbm builder builds
-# this information into the Netpbm executables. This does NOT affect
-# where the Netpbm installer installs the libraries. A null value
-# means the libraries are in a default search path used by the runtime
-# library loader.
-NETPBMLIB_RUNTIME_PATH =
-#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm
-
-# The TIFF library. See above. If you want to build the tiff
-# converters, you must have the tiff library already installed.
-
-TIFFLIB = NONE
-TIFFHDR_DIR =
-
-#TIFFLIB = libtiff.so
-#TIFFHDR_DIR = /usr/include/libtiff
-#NetBSD:
-#TIFFLIB = $(LOCALBASE)/lib/libtiff.so
-#TIFFHDR_DIR = $(LOCALBASE)/include
-# OSF, Tru64:
-#TIFFLIB = /usr/local1/DEC/lib/libtiff.so
-#TIFFHDR_DIR = /usr/local1/DEC/include
-
-# If your Tiff library depends on libraries other than libc and libm,
-# put the required linker options here.
-TIFFLIB_LDFLAGS =
-# John Milton <jmilton@fundsxpress.com> in September 2000 and
-# John Bartelt <bartelt@SLAC.Stanford.EDU> in August 2002 reported
-# needing libz with libtiff 3.5.5 (with and without LZW patch):
-#TIFFLIB_LDFLAGS = -lz
-
-# The JPEG library. See above. If you want to build the jpeg
-# converters you must have the jpeg library already installed.
-
-# Tiff files can use JPEG compression, so the Tiff library can reference
-# the JPEG library. If your Tiff library references a dynamic JPEG
-# library, you must specify at least JPEGLIB here, or the Tiff
-# converters will not build. Note that your Tiff library may have the
-# JPEG stuff statically linked in, in which case you won't need
-# JPEGLIB in order to build the Tiff converters.
-
-JPEGLIB = NONE
-JPEGHDR_DIR =
-#JPEGLIB = libjpeg.so
-#JPEGHDR_DIR = /usr/include/jpeg
-# Netbsd:
-#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB = /usr/local1/DEC/libjpeg.so
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB = /usr/local/lib/libjpeg.so
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB = NONE
-
-
-# The PNG library. See above. If you want to build the PNG
-# converters you must have the PNG library already installed.
-
-# The PNG library, by convention starting around April 2002, gets installed
-# with names that include a version number, such as libpng10.a and header
-# files in /usr/include/libpng10.
-# option.
-PNGLIB = NONE
-PNGVER =
-#PNGLIB = libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/include/libpng$(PNGVER)
-# NetBSD:
-#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so
-#PNGHDR_DIR = /usr/local1/DEC/include
-
-# The zlib compression library. See above. You need it to build
-# anything that needs the PNG library (see above). If you selected
-# NONE for the PNG library, it doesn't matter what you specify here --
-# it won't get used.
-
-ZLIB = NONE
-ZHDR_DIR =
-#ZLIB = libz.so
-
-# The JBIG lossless image compression library (aka JBIG-KIT):
-
-JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a
-JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig
-
-# The Jasper JPEG-2000 image compression library (aka JasPer):
-JASPERLIB = $(INTERNAL_JASPERLIB)
-JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR)
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTLIB = $(BUILDDIR)/urt/librle.a
-URTHDR_DIR = $(SRCDIR)/urt
-
-# The Linux SVGA library (Svgalib) is a facility for displaying graphics
-# on the Linux console. It is required by Ppmsvgalib.
-
-LINUXSVGALIB = NONE
-LINUXSVGAHDR_DIR =
-
-#LINUXSVGALIB_DIR =
-#LINUXSVGAHDR_DIR = /usr/include/vgalib
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. If you don't
-# want any network functions, make it NONE. The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD =
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# SCO:
-#NETWORKLD = -lsocket, -lresolv
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS =
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Specify the suffix that want the man pages to have.
-
-SUFFIXMANUALS1 = 1
-SUFFIXMANUALS3 = 3
-SUFFIXMANUALS5 = 5
-
-#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the
-#Netpbm library functions. The value is used only in make file tests.
-# "unixshared" means a unix-style shared library, typically named like
-# libxyz.so.2.3
-NETPBMLIBTYPE = unixshared
-# "unixstatic" means a unix-style static library, (like libxyz.a)
-#NETPBMLIBTYPE = unixstatic
-# "dll" means a Windows DLL shared library
-#NETPBMLIBTYPE = dll
-# "dylib" means a Darwin/Mac OS shared library
-#NETPBMLIBTYPE = dylib
-
-#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is
-#selected above. All this is used for is to construct library names.
-#The make files never examine the actual value.
-NETPBMLIBSUFFIX = so
-# "a" is the suffix for unix-style static libraries. Also for AIX shared
-# libraries.
-#NETPBMLIBSUFFIX = a
-# For HP-UX shared libraries:
-#NETPBMLIBSUFFIX = sl
-# Darwin/Mac OS shared library:
-#NETPBMLIBSUFFIX = dylib
-# Windows shared library:
-#NETPBMLIBSUFFIX = dll
-
-#STATICLIB_TOO is "y" to signify that you want a static library built
-#and installed in addition to whatever library type you specified by
-#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library,
-#STATICLIB_TOO simply has no effect.
-STATICLIB_TOO = y
-#STATICLIB_TOO = n
-
-#STATICLIBSUFFIX is the suffix that static libraries have. It's
-#meaningless if you aren't building static libraries.
-STATICLIBSUFFIX = a
-
-#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename
-#of a shared library may have on this system. Traditionally, it's
-#just "lib", as in libc or libpbm. On Windows, though, varying
-#prefixes are used when multiple alternative forms of a library are
-#available. The first prefix in this list is what we use to name the
-#Netpbm shared libraries.
-SHLIBPREFIXLIST = lib
-#Cygwin:
-#SHLIBPREFIXLIST = cyg lib
-
-NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST))
-
-#DLLVER is used to version the DLLs built on cygwin or other
-#windowsish platforms. We can't add this to LIBROOT, or we'd
-#version the static libs (which is bad). We can't add this
-#at the end of the name (like unix does with so numbers) because
-#windows will only load dlls whose name ends in "dll". So,
-#we have this variable, which becomes the end of the library "root" name
-#for DLLs only.
-DLLVER =
-#Cygwin
-#DLLVER = $(NETPBM_MAJOR_RELEASE)
-
-#NETPBM_DOCURL is the URL of the main documentation page for Netpbm.
-#This is a directory which contains a file for each Netpbm program,
-#library, and file type. E.g. The documentation for jpegtopnm might be in
-#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets
-#installed in the man pages (which say no more than to read the webpage)
-#and in the Webman netpbm.url file.
-NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/
-#For a system with no web access, but a local copy of the doc:
-#NETPBM_DOCURL = file:/usr/doc/netpbm/
-
-# This is where everything goes when you do 'make package':
-PKGDIR = /tmp/netpbm
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-DEFAULT_TARGET = nonmerge
-NETPBMLIBTYPE=unixshared
-NETPBMLIBSUFFIX=so
-STATICLIB_TOO=n
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit -Wwrite-strings
-CFLAGS_MERGE = -Wno-missing-declarations
-TIFFLIB = libtiff.so
-JPEGLIB = libjpeg.so
-PNGLIB = libpng.so
-ZLIB = libz.so
-LINUXSVGAHDR_DIR = /usr/include
-LINUXSVGALIB = /usr/lib/libvga.so
+++ /dev/null
-####This file was automatically created by 'configure.'
-# This is a make file inclusion, to be included in all the Netpbm make
-# files.
-
-# This file is meant to contain variable settings that customize the
-# build for a particular target system configuration.
-
-# The distribution contains the file Makefile.config.in. You edit
-# Makefile.config.in in ways relevant to your particular environment
-# to create Makefile.config. The "configure" program will do this
-# for you in simple cases.
-
-# Some of the variables that the including make file must set for this
-# file to work:
-#
-# SRCDIR: The directory at the top of the Netpbm source tree. Note that
-# this is typically a relative directory, and it must be relative to the
-# make file that includes this file. So it's normally "..".
-#
-# CDEBUG: temporary extra compiler options for every compile. Normally,
-# you set this this via the Make command line, e.g. "make CDEBUG=-g" or
-# "make CDEBUG=-Werror".
-
-# STATICLIB = Y means to build the Netpbm and Tiff libraries (if
-# built) as static libraries instead of shared. With static
-# libraries, you should consider doing a merge build ('make merge')
-# instead of the default to save disk space and memory.
-#
-# For cygwin, only static libraries work, so set STATICLIB = Y .
-
-STATICLIB = N
-#STATICLIB = Y
-
-# The following are commands for the build process to use. These values
-# do not get built into anything.
-
-# The C compiler (including macro preprocessor)
-#Tru64 (= Digital Unix):
-#CC = cc
-#CC = gcc
-CC = gcc
-
-# The linker.
-LD = $(CC)
-#LD = ld
-#Tru64:
-#LD = cc
-#LD = gcc
-
-# MAKE is set automatically by Make to what was used to invoke Make.
-
-#INSTALL = ginstall
-#Solaris:
-#INSTALL = /usr/ucb/install
-#Tru64:
-#INSTALL = installbsd
-#OSF1:
-#INSTALL = installosf
-#Red Hat Linux:
-INSTALL = install
-
-# STRIPFLAG is the option you pass to the above install program to make it
-# strip unnecessary information out of binaries.
-#STRIPFLAG = -s
-# If you don't want to strip the binaries, just leave it null:
-STRIPFLAG =
-
-# Normally the man pages are installed using "install". But via this
-# variable, you can use something else, for example a script that
-# calls compress or pack. Mantocat, included with Netpbm, is used on
-# systems which use man pages in the "cat" format.
-
-MANCP = $(INSTALL) -m $(INSTALL_PERM_MAN)
-#DJGPP/Windows:
-#MANCP = $(SRCDIR)/mantocat
-
-AR = ar
-RANLIB = ranlib
-
-
-# C compiler options
-
-# gcc:
-# -ansi and -Werror should work too, but are not included
-# by default because there's no point in daring the build to fail.
-# -pedantic isn't a problem because it causes at worst a warning.
-CFLAGS = -pedantic -O3 -Wall -Wno-uninitialized $(CDEBUG)
-# On DEC Tru64 4.0F (at least), you need -DLONG_32 for ppmtompeg.
-#Tru64:
-#CFLAGS = -O2 -std1 -DLONG_32 $(CDEBUG)
-
-# EXE is a suffix that the linker puts on any executable it generates.
-# In cygwin, this is .exe and most programs deal with its existence without
-# us having to know about it. Some don't though, so set this:
-
-EXE =
-#Cygwin, DJGPP/Windows:
-#EXE = .exe
-
-# linker options.
-
-LDFLAGS =
-# Eunice users may want to use -noshare so that the executables can
-# run standalone:
-#LDFLAGS = -noshare
-#Tru64:
-#LDFLAGS = -call_shared
-# Many systems, including SunOS and Solaris, and NetBSD, need options to
-# tell where Netpbm libraries will be at runtime. Even if you don't need
-# it, you may prefer to use it than to set up environment variables or
-# configuration files at runtime to give the same information.
-# For a traditional linker:
-#LDFLAGS = -R$(INSTALLLIBS)
-#If the linker is gcc (e.g. NetBSD):
-#LDFLAGS = -Wl,--rpath,$(INSTALLLIBS)
-
-# Linker options for created Netpbm shared libraries.
-
-# Here, $(SONAME) resolves to the soname for the shared library being created.
-# The following are gcc options. This works on GNU libc systems.
-LDSHLIB = -shared -Wl,-soname,$(SONAME)
-# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is
-# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc
-# documentation and doesn't exist in at least one non-BeOS installation.
-# BeOS doesn't have sonames built in.
-#LDSHLIB = -nostart
-#LDSHLIB = -G
-# Solaris, SunOS with GNU Ld:
-# (You need -R here, as above, because the Netpbm
-# libraries depend on each other. These systems have no soname option).
-#LDSHLIB = -shared -R$(INSTALLLIBS)
-# Solaris with Sun Ld:
-#LDSHLIB = -Wl,-B,dynamic,-G,-h,$(SONAME)
-#Tru64:
-#LDSHLIB = -shared -expect_unresolved "*"
-
-# On older systems, you have to make shared libraries out of position
-# independent code, so you need -fpic or fPIC here. (The rule is: if
-# -fpic works, use it. If it bombs, go to fPIC).
-
-#CFLAGS_SHLIB =
-# Solaris, SunOS, and NetBSD:
-#CFLAGS_SHLIB = -fpic
-CFLAGS_SHLIB = -fPIC
-
-# The netpbm package contains a version of the Tiff library,
-# libtiff. If you want to use your own, fill in the appropriate paths
-# below for the library and its interface headers
-
-# Put the location of the TIFF library here. Netpbm comes with a version
-# of the TIFF library, so you can just specify the library in the Netpbm
-# source tree unless you want to use your own TIFF library. If you
-# specify the included TIFF library, 'make install' will also install it,
-# but otherwise will not.
-
-# Use the Tiff library included with Netpbm:
-TIFFHDR_DIR = /usr/include
-TIFFLIB_DIR = /usr/lib
-#NetBSD:
-#TIFFHDR_DIR = $(LOCALBASE)/include
-#TIFFLIB_DIR = $(LOCALBASE)/lib
-# OSF, Tru64:
-#TIFFHDR_DIR = /usr/local1/DEC/include
-#TIFFLIB_DIR = /usr/local1/DEC/lib
-
-# If your Tiff library depends on libraries other than libc and libm,
-# put the required linker options here.
-TIFFLIB_LDFLAGS = -ljpeg -lz
-# libtiff 3.5.5 with the lzw patch needs libz:
-#TIFFLIB_LDFLAGS = -lz
-
-# Put the location of your JPEG library here.
-# If you want to build the jpeg converters or tiff
-# converters that use jpeg compression in tiff files, you must have
-# the jpeg library already installed. Put the locations of the link
-# library and the interface header files here. If you do not have the
-# JPEG library, and still want to successully build everything else,
-# including non-JPEG versions of the tiff converters, put NONE for
-# these.
-
-# Special note for people using an already-installed Tiff library: If
-# your library was built with the JPEG stuff statically linked in, you
-# don't need the JPEG library and the tiff converters will still do jpeg.
-# If your library references a dynamic JPEG library, you must specify
-# at least JPEGLIB_DIR here, or the tiff converters will not build at
-# all.
-
-JPEGLIB_DIR = /usr/lib
-JPEGHDR_DIR = /usr/include
-# Netbsd:
-#JPEGLIB_DIR = ${LOCALBASE}/lib
-#JPEGHDR_DIR = ${LOCALBASE}/include
-# OSF, Tru64:
-#JPEGLIB_DIR = /usr/local1/DEC/lib
-#JPEGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#JPEGLIB_DIR = /usr/local/lib
-#JPEGHDR_DIR = /usr/local/include
-# Don't build JPEG stuff:
-#JPEGLIB_DIR = NONE
-#JPEGHDR_DIR = NONE
-
-
-# Put the location of your PNG library here. If you want to build the
-# PNG converters you must have the PNG library already installed. Put
-# the locations of the link library and the interface header files
-# here. If you do not have the PNG library, and still want to
-# successully build everything else, put NONE for these.
-
-PNGLIB_DIR = /usr/lib
-PNGHDR_DIR = /usr/include
-# NetBSD:
-#PNGLIB_DIR = $(LOCALBASE)/lib
-#PNGHDR_DIR = $(LOCALBASE)/include
-# OSF/Tru64:
-#PNGLIB_DIR = /usr/local1/DEC/lib
-#PNGHDR_DIR = /usr/local1/DEC/include
-# Typical:
-#PNGLIB_DIR = /usr/local/lib
-#PNGHDR_DIR = /usr/local/include
-# No PNG:
-#PNGLIB_DIR = NONE
-#PNGHDR_DIR = NONE
-
-# Put the location of your zlib compression library here. You need it
-# to build anything that needs the PNG library (see above). If you
-# selected NONE for the PNG library, it doesn't matter what you specify
-# here -- it won't get used.
-
-ZLIB_DIR = /lib
-ZHDR_DIR = /usr/include
-
-# And the Utah Raster Toolkit (aka URT aka RLE) library:
-
-URTHDR_DIR = $(SRCDIR)/urt
-URTLIB_DIR = $(SRCDIR)/urt
-
-# These are -l options to link in the network libraries. Often, these are
-# built into the standard C library, so this can be null. If you don't
-# want any network functions, make it NONE. The only thing that requires
-# network functions is the option in ppmtompeg to run it on multiple
-# computers simultaneously.
-
-NETWORKLD = -lnsl
-# Solaris, SunOS:
-#NETWORKLD = -lsocket -lnsl
-# Don't build network functions:
-#DJGPP/Windows, Tru64:
-# (there's some minor header problem that prevents network functions from
-# building on Tru64 2000.10.06)
-#NETWORKLD = NONE
-
-VMS =
-#VMS:
-#VMS = yes
-
-# The following variables are used only by 'make install' (and the
-# variants of it). Paths here don't, for example, get built into any
-# programs.
-
-# EXCEPTION: If you used a -R $(INSTALL_LIBS) option above,
-# then INSTALL_LIBS gets built into your shared libraries.
-
-# File permissions for installed files.
-# Note that on some systems (e.g. Solaris), 'install' can't use the
-# mnemonic permissions - you have to use octal.
-
-# binaries (pbmmake, etc)
-INSTALL_PERM_BIN = 755 # u=rwx,go=rx
-# shared libraries (libpbm.so, etc)
-INSTALL_PERM_LIBD = 755 # u=rwx,go=rx
-# static libraries (libpbm.a, etc)
-INSTALL_PERM_LIBS = 644 # u=rw,go=r
-# header files (pbm.h, etc)
-INSTALL_PERM_HDR = 644 # u=rw,go=r
-# man pages (pbmmake.1, etc)
-INSTALL_PERM_MAN = 644 # u=rw,go=r
-# data files (pnmtopalm color maps, etc)
-INSTALL_PERM_DATA = 644 # u=rw,go=r
-
-# Everything gets installed relative to directory INSTALL_PREFIX. If
-# you're spreading Netpbm across your system, use "/".
-
-# DEC Tru64:
-#INSTALL_PREFIX = /usr/local1/DEC/packages/netpbm
-# DJGPP/Windows:
-#INSTALL_PREFIX = /djgpp
-# Typical:
-#INSTALL_PREFIX = /usr/local/
-INSTALL_PREFIX = /usr
-
-# Specify the directory where you want the executables.
-# If you need scripts and binaries to be in different directories, you
-# can set that up too.
-
-INSTALLBINARIES = $(INSTALL_PREFIX)/bin
-#INSTALLBINARIES = /usr/local/bin/netpbm
-INSTALLSCRIPTS = $(INSTALLBINARIES)
-
-# Specify the directory where you want the shared libraries
-# installed. For this to be effective, you must have set up this location
-# to be searched by your system's program executor for runtime libraries.
-
-INSTALLLIBS = $(INSTALL_PREFIX)/lib
-#INSTALLLIBS = /usr/local/lib/netpbm
-
-# Specify the directories that you want the man page sources,
-# plus the suffix you want them to have.
-
-INSTALLMANUALS1 = $(INSTALL_PREFIX)/share/man/man1
-SUFFIXMANUALS1 = 1
-INSTALLMANUALS3 = $(INSTALL_PREFIX)/share/man/man3
-SUFFIXMANUALS3 = 3
-INSTALLMANUALS5 = $(INSTALL_PREFIX)/share/man/man5
-SUFFIXMANUALS5 = 5
-
-# Specify the directory where you want the interface header files for
-# the Netpbm (and possibly Tiff) libraries installed.
-
-INSTALLHDRS = $(INSTALL_PREFIX)/include
-
-# Specify the directory where you want data files that the Netpbm programs
-# access to be installed
-
-INSTALLDATA = $(INSTALL_PREFIX)/share/netpbm
-
-
-#NETPBMLIBSUFFIX is the suffix on the filename of the generated and installed
-#Netpbm libraries. But you can't make it just anything, because there has to
-#be a rule in the makefiles to make whatever the filename turns out to be.
-#Only .a and .so work.
-# For static libraries:
-#NETPBMLIBSUFFIX = a
-#LIBTIFFSUFFIX = a
-# For shared libraries:
-NETPBMLIBSUFFIX = so
-LIBTIFFSUFFIX = so
-
-
-
-
-####Lines above were copied from Makefile.config.in by 'configure'.
-####Lines below were added by 'configure' based on the GNU platform.
-INSTALL_PREFIX = /usr
-# Some people specify PREFIX= on the command line, because that's conventional
-ifneq ($(PREFIX)x,x)
- INSTALL_PREFIX = $(PREFIX)
-endif
-NETPBMLIBSUFFIX=so
-LIBTIFFSUFFIX=so
+++ /dev/null
-MD5 b12117ae6cce0280d4e72ec5e61fc672 netpbm-10.11.14.tgz 1882025
+++ /dev/null
-MD5 c608c25a805c0de13191682750793de6 netpbm-10.11.15.tgz 1882830
+++ /dev/null
-MD5 3a10f98234d81bd0731c721a3a2b2876 netpbm-10.11.5.tgz 1910762
+++ /dev/null
-MD5 f89977d5ba8d5814932e2d62b4011cd5 netpbm-10.18.7.tgz 2089782
+++ /dev/null
-MD5 e6bf74f0cef5271041e0ee4842c8fcef netpbm-10.19.tgz 2088234
+++ /dev/null
-MD5 6de9fb5133763d30f1ae707b4b115cfe netpbm-9.12.tgz 2057293
+++ /dev/null
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.14.ebuild,v 1.12 2005/05/30 18:53:36 swegener Exp $
-
-inherit flag-o-matic toolchain-funcs
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~mips ~alpha ~hppa ~amd64 ia64"
-IUSE="svga jpeg tiff png zlib"
-
-DEPEND="jpeg? ( >=media-libs/jpeg-6b )
- tiff? ( >=media-libs/tiff-3.5.5 )
- png? ( >=media-libs/libpng-1.2.1 )
- zlib? ( sys-libs/zlib )
- svga? ( media-libs/svgalib )"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- cp Makefile.config.in Makefile.config
-
- if use svga ; then
- echo "LINUXSVGAHDR_DIR = /usr/include" >> Makefile.config
- echo "LINUXSVGALIB = /usr/lib/libvga.so" >> Makefile.config
- fi
-
- if use jpeg ; then
- echo "JPEGLIB = libjpeg.so" >> Makefile.config
- fi
-
- if use png ; then
- echo "PNGLIB = libpng.so" >> Makefile.config
- fi
-
- if use tiff ; then
- echo "TIFFLIB = libtiff.so" >> Makefile.config
- fi
-
- if use zlib ; then
- echo "ZLIB = libz.so" >> Makefile.config
- fi
-
- # Sparc support ...
- replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
- replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
- sed -i -e "s:-O3:${CFLAGS} -fPIC:" Makefile.config || die " sed failed"
-}
-
-src_compile() {
- emake -j1 CC="$(tc-getCC)" CXX="$(tc-getCXX)" || die "emake failed"
-}
-
-src_install() {
- make package pkgdir=${D}/usr/ || die "make package failed"
-
- # Fix symlink not being created.
- dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
- dodir /usr/share
- rm -rf ${D}/usr/bin/doc.url
- rm -rf ${D}/usr/man/web
- rm -rf ${D}/usr/link
- rm -rf ${D}/usr/README
- rm -rf ${D}/usr/pkginfo
- mv ${D}/usr/man/ ${D}/usr/share/man
-
- dodoc README
- export GLOBIGNORE='*.html:.*'
- cd doc && \
- dodoc * && \
- dohtml -r . || die "doc install failed"
-}
+++ /dev/null
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.15.ebuild,v 1.8 2005/05/30 18:53:36 swegener Exp $
-
-inherit flag-o-matic toolchain-funcs
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~mips ~alpha ~hppa amd64 ~ia64"
-IUSE="svga jpeg tiff png zlib"
-
-DEPEND="jpeg? ( >=media-libs/jpeg-6b )
- tiff? ( >=media-libs/tiff-3.5.5 )
- png? ( >=media-libs/libpng-1.2.1 )
- zlib? ( sys-libs/zlib )
- svga? ( media-libs/svgalib )"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- cp Makefile.config.in Makefile.config
-
- if use svga ; then
- echo "LINUXSVGAHDR_DIR = /usr/include" >> Makefile.config
- echo "LINUXSVGALIB = /usr/lib/libvga.so" >> Makefile.config
- fi
-
- if use jpeg ; then
- echo "JPEGLIB = libjpeg.so" >> Makefile.config
- fi
-
- if use png ; then
- echo "PNGLIB = libpng.so" >> Makefile.config
- fi
-
- if use tiff ; then
- echo "TIFFLIB = libtiff.so" >> Makefile.config
- fi
-
- if use zlib ; then
- echo "ZLIB = libz.so" >> Makefile.config
- fi
-
- # Sparc support ...
- replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
- replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
- sed -i -e "s:-O3:${CFLAGS} -fPIC:" Makefile.config || die " sed failed"
-}
-
-src_compile() {
- emake -j1 CC="$(tc-getCC)" CXX="$(tc-getCXX)" || die "emake failed"
-}
-
-src_install() {
- make package pkgdir=${D}/usr/ || die "make package failed"
-
- # Fix symlink not being created.
- dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
- dodir /usr/share
- rm -rf ${D}/usr/bin/doc.url
- rm -rf ${D}/usr/man/web
- rm -rf ${D}/usr/link
- rm -rf ${D}/usr/README
- rm -rf ${D}/usr/pkginfo
- mv ${D}/usr/man/ ${D}/usr/share/man
-
- dodoc README
- export GLOBIGNORE='*.html:.*'
- cd doc && \
- dodoc * && \
- dohtml -r . || die "doc install failed"
-}
+++ /dev/null
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.11.5-r3.ebuild,v 1.9 2005/05/30 18:53:36 swegener Exp $
-
-inherit flag-o-matic toolchain-funcs
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~mips alpha ~hppa ~amd64"
-IUSE="svga"
-
-DEPEND=">=media-libs/jpeg-6b
- >=media-libs/tiff-3.5.5
- >=media-libs/libpng-1.2.1
- svga? ( media-libs/svgalib )"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
-
- if use svga ; then
- cfg="svga"
- else
- cfg="config"
- fi
-
- # Sparc support ...
- replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
- replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
- sed -e "s:-O3:${CFLAGS} -fPIC:" ${FILESDIR}/${PV}/Makefile.${cfg} \
- > Makefile.config || die "Flag replacement failed"
-}
-
-src_compile() {
- emake -j1 CC="$(tc-getCC)" CXX="$(tc-getCXX)" || die "emake failed"
-}
-
-src_install() {
- make package pkgdir=${D}/usr/ || die "make package failed"
-
- # Fix symlink not being created.
- dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
- dodir /usr/share
- rm -rf ${D}/usr/bin/doc.url
- rm -rf ${D}/usr/man/web
- rm -rf ${D}/usr/link
- rm -rf ${D}/usr/README
- rm -rf ${D}/usr/pkginfo
- mv ${D}/usr/man/ ${D}/usr/share/man
-
- dodoc README
- export GLOBIGNORE='*.html:.*'
- cd doc && \
- dodoc * && \
- dohtml -r . || die "doc install failed"
-}
+++ /dev/null
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.18.7.ebuild,v 1.6 2005/05/30 18:53:36 swegener Exp $
-
-inherit flag-o-matic toolchain-funcs
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~alpha ~mips ~hppa ~amd64 ~ia64"
-IUSE="svga jpeg tiff png zlib"
-
-DEPEND="jpeg? ( >=media-libs/jpeg-6b )
- tiff? ( >=media-libs/tiff-3.5.5 )
- png? ( >=media-libs/libpng-1.2.1 )
- zlib? ( sys-libs/zlib )
- svga? ( media-libs/svgalib )"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- cp Makefile.config.in Makefile.config
-
- if use svga ; then
- echo "LINUXSVGAHDR_DIR = /usr/include" >> Makefile.config
- echo "LINUXSVGALIB = /usr/lib/libvga.so" >> Makefile.config
- fi
-
- if use jpeg ; then
- echo "JPEGLIB = libjpeg.so" >> Makefile.config
- fi
-
- if use png ; then
- echo "PNGLIB = libpng.so" >> Makefile.config
- fi
-
- if use tiff ; then
- echo "TIFFLIB = libtiff.so" >> Makefile.config
- fi
-
- if use zlib ; then
- echo "ZLIB = libz.so" >> Makefile.config
- fi
-
- # Sparc support ...
- replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
- replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
- sed -i -e "s:-O3:${CFLAGS} -fPIC:" Makefile.config || die " sed failed"
-}
-
-src_compile() {
- emake -j1 CC="$(tc-getCC)" CXX="$(tc-getCXX)" || die "emake failed"
-}
-
-src_install() {
- make package pkgdir=${D}/usr/ || die "make package failed"
-
- # Fix symlink not being created.
- dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
- dodir /usr/share
- rm -rf ${D}/usr/bin/doc.url
- rm -rf ${D}/usr/man/web
- rm -rf ${D}/usr/link
- rm -rf ${D}/usr/README
- rm -rf ${D}/usr/pkginfo
- mv ${D}/usr/man/ ${D}/usr/share/man
-
- dodoc README
- export GLOBIGNORE='*.html:.*'
- cd doc && \
- dodoc * && \
- dohtml -r . || die "doc install failed"
-}
+++ /dev/null
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-10.19.ebuild,v 1.6 2004/06/25 03:07:32 agriffis Exp $
-
-inherit flag-o-matic
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~alpha ~mips ~hppa ~amd64 ~ia64"
-IUSE="svga"
-
-DEPEND=">=media-libs/jpeg-6b
- >=media-libs/tiff-3.5.5
- >=media-libs/libpng-1.2.1
- svga? ( media-libs/svgalib )"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- cp Makefile.config.in Makefile.config
-
- if use svga ; then
- echo "LINUXSVGAHDR_DIR = /usr/include" >> Makefile.config
- echo "LINUXSVGALIB = /usr/lib/libvga.so" >> Makefile.config
- fi
-
- # Sparc support ...
- replace-flags "-mcpu=ultrasparc" "-mcpu=v8 -mtune=ultrasparc"
- replace-flags "-mcpu=v9" "-mcpu=v8 -mtune=v9"
-
- sed -i \
- -e 's:$(CFLAGS):$(CFLAGS) -fPIC:' \
- -e 's:$(LDFLAGS):$(LDFLAGS) -fPIC:' \
- lib/Makefile
- sed -i 's:$(CCOPT):$(CCOPT) -fPIC:' \
- lib/util/Makefile
-}
-
-src_compile() {
- emake -j1 || die "emake failed"
-}
-
-src_install() {
- make package pkgdir=${D}/usr/ || die "make package failed"
- dodoc ${D}/usr/misc/*
- rm -rf ${D}/usr/{VERSION,misc}
-
- # Fix symlink not being created.
- dosym `basename ${D}/usr/lib/libnetpbm.so.*` /usr/lib/libnetpbm.so
-
- dodir /usr/share
- rm -rf ${D}/usr/bin/doc.url
- rm -rf ${D}/usr/man/web
- rm -rf ${D}/usr/link
- rm -rf ${D}/usr/README
- rm -rf ${D}/usr/pkginfo
- mv ${D}/usr/man/ ${D}/usr/share/man
-
- dodoc README
- export GLOBIGNORE='*.html:.*'
- cd doc && \
- dodoc * && \
- dohtml -r . || die "doc install failed"
-}
+++ /dev/null
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-libs/netpbm/netpbm-9.12-r4.ebuild,v 1.19 2005/05/30 18:53:36 swegener Exp $
-
-inherit flag-o-matic toolchain-funcs
-
-DESCRIPTION="A set of utilities for converting to/from the netpbm (and related) formats"
-HOMEPAGE="http://netpbm.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tgz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="x86 ppc sparc amd64 hppa"
-IUSE=""
-
-DEPEND=">=media-libs/jpeg-6b
- >=media-libs/tiff-3.5.5
- >=media-libs/libpng-1.2.1"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- # 13/May/2003: Fix for bug #14392 by Jason Wever <weeve@gentoo.org>
- # start fix
- if [ ${ARCH} = "sparc" ]
- then
- filter-flags -O3 -O2 -O
- fi
- # end fix
- sed -e "s:-O3:${CFLAGS}:" ${FILESDIR}/${PV}/Makefile.config >Makefile.config
-}
-
-src_compile() {
- emake -j1 CC="$(tc-getCC)" CXX="$(tc-getCXX)" || die "emake failed"
-}
-
-src_install() {
- make INSTALL_PREFIX="${D}/usr/" install || die "Install failed"
-
- # fix broken symlinks
- dosym /usr/bin/gemtopnm /usr/bin/gemtopbm
- dosym /usr/bin/pnmtoplainpnm /usr/bin/pnmnoraw
-
- insinto /usr/include
- doins pnm/{pam,pnm}.h ppm/{ppm,pgm,pbm}.h
- doins pbmplus.h shhopt/shhopt.h
- dodoc COPYRIGHT.PATENT GPL_LICENSE.txt HISTORY \
- Netpbm.programming README* netpbm.lsm
-}
projects / gentoo.git / commitdiff