Typo in the synchonous out command: in case of an error the

synchronous _in_ command was stopped instead of the out command.
Also added a short description of the timer connections.

diff --git a/comedi/drivers/usbdux.c b/comedi/drivers/usbdux.c
index 8d83fdbfa1b55e4c7627a260839d6537fe52067d..5f55d5390cb73deb9c7f10f9f70ef6b35cd68763 100644 (file)
--- a/comedi/drivers/usbdux.c
+++ b/comedi/drivers/usbdux.c
@@ -1,4 +1,4 @@
-#define DRIVER_VERSION "v1.00pre8"
+#define DRIVER_VERSION "v1.00pre9"
 #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com"
 #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com"
 /*
@@ -25,9 +25,20 @@ Driver: usbdux.c
 Description: University of Stirling USB DAQ & INCITE Technology Limited
 Devices: [ITL] USB-DUX (usbdux.o)
 Author: Bernd Porr <BerndPorr@f2s.com>
-Updated: 10 Aug 2004
-Status: testing
-
+Updated: 05 Sept 2004
+Status: Stable
+Configuration options:
+  You have to upload firmware with the -i option. The
+  firmware is usually installed under /usr/share/usb or
+  /usr/local/share/usb.
+
+Connection scheme for the counter at the digital port:
+  0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1.
+  The sampling rate of the counter is approximately 500Hz.
+
+Please note that under USB2.0 the length of the channel list determines
+the max sampling rate. If you sample only one channel you get 8kHz
+sampling rate. If you sample two channels you get 4kHz and so on.
 */
 /*
  * I must give credit here to Chris Baugher who
@@ -65,7 +76,6 @@ Status: testing
  *
  * Todo:
  * - use EP1in/out for sync digital I/O
- * - PWM with the GPIF
  */
 
 
@@ -111,13 +121,9 @@ Status: testing
 // Input endpoint number: ISO/IRQ
 #define ISOINEP           6
 
-#define IRQINEP           6
-
 // Output endpoint number: ISO/IRQ
 #define ISOOUTEP          2
 
-#define IRQOUTEP          2
-
 // This EP sends DUX commands to USBDUX
 #define COMMAND_OUT_EP     4
 
@@ -783,7 +789,7 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb, struct pt_regs *regs) {
                                     s, 
                                     s->async->events);
                        // don't do an unlink here
-                       usbdux_ai_stop(this_usbduxsub,0);
+                       usbdux_ao_stop(this_usbduxsub,0);
                }
        }
 }