bisect: cleanup whitespace errors in git-bisect.sh.
authorJon Seymour <jon.seymour@gmail.com>
Fri, 5 Aug 2011 11:31:30 +0000 (21:31 +1000)
committerJunio C Hamano <gitster@pobox.com>
Fri, 5 Aug 2011 17:01:30 +0000 (10:01 -0700)
All leading whitespace is now encoded with tabs.

After this patch, the following is true:

RAW=$(cat git-bisect.sh | md5sum) &&
ROUNDTRIP=$(cat git-bisect.sh | expand -i - | unexpand --first-only - | md5sum) &&
LEADING=$(sed -n "/^  */p" < git-bisect.sh | wc -l) &&
test $RAW = $ROUNDTRIP &&
test $LEADING = 0 &&
test -z "$(git diff -w HEAD~1 HEAD)"

Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-bisect.sh

index b9c18dd2071cbfa5a94ab32700f535c0d6acf528..f5d9ede9dde988f7b2ce9dc89c1f86d74c30664c 100755 (executable)
@@ -2,27 +2,27 @@
 
 USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
 LONG_USAGE='git bisect help
-        print this long help message.
+       print this long help message.
 git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
-        reset bisect state and start bisection.
+       reset bisect state and start bisection.
 git bisect bad [<rev>]
-        mark <rev> a known-bad revision.
+       mark <rev> a known-bad revision.
 git bisect good [<rev>...]
-        mark <rev>... known-good revisions.
+       mark <rev>... known-good revisions.
 git bisect skip [(<rev>|<range>)...]
-        mark <rev>... untestable revisions.
+       mark <rev>... untestable revisions.
 git bisect next
-        find next bisection to test and check it out.
+       find next bisection to test and check it out.
 git bisect reset [<commit>]
-        finish bisection search and go back to commit.
+       finish bisection search and go back to commit.
 git bisect visualize
-        show bisect status in gitk.
+       show bisect status in gitk.
 git bisect replay <logfile>
-        replay bisection log.
+       replay bisection log.
 git bisect log
-        show bisect log.
+       show bisect log.
 git bisect run <cmd>...
-        use <cmd>... to automatically bisect.
+       use <cmd>... to automatically bisect.
 
 Please use "git help bisect" to get the full man page.'
 
@@ -55,7 +55,7 @@ bisect_autostart() {
                        # TRANSLATORS: Make sure to include [Y] and [n] in your
                        # translation. The program will only accept English input
                        # at this point.
-           gettext "Do you want me to do it for you [Y/n]? " >&2
+                       gettext "Do you want me to do it for you [Y/n]? " >&2
                        read yesno
                        case "$yesno" in
                        [Nn]*)
@@ -74,38 +74,38 @@ bisect_start() {
        #
        has_double_dash=0
        for arg; do
-           case "$arg" in --) has_double_dash=1; break ;; esac
+               case "$arg" in --) has_double_dash=1; break ;; esac
        done
        orig_args=$(git rev-parse --sq-quote "$@")
        bad_seen=0
        eval=''
        mode=''
        while [ $# -gt 0 ]; do
-           arg="$1"
-           case "$arg" in
-           --)
-               shift
-               break
+               arg="$1"
+               case "$arg" in
+               --)
+                       shift
+                       break
                ;;
-           --no-checkout)
-               mode=--no-checkout
-               shift ;;
-           --*)
-               die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
-           *)
-               rev=$(git rev-parse -q --verify "$arg^{commit}") || {
-                   test $has_double_dash -eq 1 &&
+               --no-checkout)
+                       mode=--no-checkout
+                       shift ;;
+               --*)
+                       die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
+               *)
+                       rev=$(git rev-parse -q --verify "$arg^{commit}") || {
+                           test $has_double_dash -eq 1 &&
                        die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
-                   break
-               }
-               case $bad_seen in
-               0) state='bad' ; bad_seen=1 ;;
-               *) state='good' ;;
+                           break
+                       }
+                       case $bad_seen in
+                       0) state='bad' ; bad_seen=1 ;;
+                       *) state='good' ;;
+                       esac
+                       eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
+                       shift
+                       ;;
                esac
-               eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
-               shift
-               ;;
-           esac
        done
 
        #
@@ -207,18 +207,18 @@ check_expected_revs() {
 }
 
 bisect_skip() {
-        all=''
+       all=''
        for arg in "$@"
        do
-           case "$arg" in
-            *..*)
-               revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
-            *)
-                revs=$(git rev-parse --sq-quote "$arg") ;;
-           esac
-            all="$all $revs"
-        done
-        eval bisect_state 'skip' $all
+               case "$arg" in
+               *..*)
+                       revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
+               *)
+                       revs=$(git rev-parse --sq-quote "$arg") ;;
+               esac
+               all="$all $revs"
+       done
+       eval bisect_state 'skip' $all
 }
 
 bisect_state() {
@@ -316,7 +316,7 @@ bisect_next() {
        git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
        res=$?
 
-        # Check if we should exit because bisection is finished
+       # Check if we should exit because bisection is finished
        test $res -eq 10 && exit 0
 
        # Check for an error in the bisection process
@@ -355,12 +355,12 @@ bisect_reset() {
        case "$#" in
        0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
        1) git rev-parse --quiet --verify "$1^{commit}" > /dev/null || {
-              invalid="$1"
-              die "$(eval_gettext "'\$invalid' is not a valid commit")"
-          }
-          branch="$1" ;;
+                       invalid="$1"
+                       die "$(eval_gettext "'\$invalid' is not a valid commit")"
+               }
+               branch="$1" ;;
        *)
-           usage ;;
+               usage ;;
        esac
        if ! test -f "$GIT_DIR/BISECT_HEAD"
        then
@@ -418,65 +418,65 @@ bisect_replay () {
 }
 
 bisect_run () {
-    bisect_next_check fail
-
-    while true
-    do
-      command="$@"
-      eval_gettext "running \$command"; echo
-      "$@"
-      res=$?
-
-      # Check for really bad run error.
-      if [ $res -lt 0 -o $res -ge 128 ]; then
-         (
-           eval_gettext "bisect run failed:
+       bisect_next_check fail
+
+       while true
+       do
+               command="$@"
+               eval_gettext "running \$command"; echo
+               "$@"
+               res=$?
+
+               # Check for really bad run error.
+               if [ $res -lt 0 -o $res -ge 128 ]; then
+                       (
+                               eval_gettext "bisect run failed:
 exit code \$res from '\$command' is < 0 or >= 128" &&
-           echo
-         ) >&2
-         exit $res
-      fi
-
-      # Find current state depending on run success or failure.
-      # A special exit code of 125 means cannot test.
-      if [ $res -eq 125 ]; then
-         state='skip'
-      elif [ $res -gt 0 ]; then
-         state='bad'
-      else
-         state='good'
-      fi
-
-      # We have to use a subshell because "bisect_state" can exit.
-      ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
-      res=$?
-
-      cat "$GIT_DIR/BISECT_RUN"
-
-      if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
-               > /dev/null; then
-         (
-             gettext "bisect run cannot continue any more" &&
-             echo
-         ) >&2
-         exit $res
-      fi
-
-      if [ $res -ne 0 ]; then
-         (
-             eval_gettext "bisect run failed:
+                               echo
+                       ) >&2
+                       exit $res
+               fi
+
+               # Find current state depending on run success or failure.
+               # A special exit code of 125 means cannot test.
+               if [ $res -eq 125 ]; then
+                       state='skip'
+               elif [ $res -gt 0 ]; then
+                       state='bad'
+               else
+                       state='good'
+               fi
+
+               # We have to use a subshell because "bisect_state" can exit.
+               ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
+               res=$?
+
+               cat "$GIT_DIR/BISECT_RUN"
+
+               if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
+                       > /dev/null; then
+                       (
+                               gettext "bisect run cannot continue any more" &&
+                               echo
+                       ) >&2
+                       exit $res
+               fi
+
+               if [ $res -ne 0 ]; then
+                       (
+                               eval_gettext "bisect run failed:
 'bisect_state \$state' exited with error code \$res" &&
-             echo
-         ) >&2
-         exit $res
-      fi
+                               echo
+                       ) >&2
+                       exit $res
+               fi
 
-      if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
-         gettext "bisect run success"; echo
-         exit 0;
-      fi
+               if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
+                       gettext "bisect run success"; echo
+                       exit 0;
+               fi
 
-    done
+       done
 }
 
 bisect_log () {
@@ -486,33 +486,33 @@ bisect_log () {
 
 case "$#" in
 0)
-    usage ;;
+       usage ;;
 *)
-    cmd="$1"
-    shift
-    case "$cmd" in
-    help)
-        git bisect -h ;;
-    start)
-        bisect_start "$@" ;;
-    bad|good)
-        bisect_state "$cmd" "$@" ;;
-    skip)
-        bisect_skip "$@" ;;
-    next)
-        # Not sure we want "next" at the UI level anymore.
-        bisect_next "$@" ;;
-    visualize|view)
-       bisect_visualize "$@" ;;
-    reset)
-        bisect_reset "$@" ;;
-    replay)
-       bisect_replay "$@" ;;
-    log)
-       bisect_log ;;
-    run)
-        bisect_run "$@" ;;
-    *)
-        usage ;;
-    esac
+       cmd="$1"
+       shift
+       case "$cmd" in
+       help)
+               git bisect -h ;;
+       start)
+               bisect_start "$@" ;;
+       bad|good)
+               bisect_state "$cmd" "$@" ;;
+       skip)
+               bisect_skip "$@" ;;
+       next)
+               # Not sure we want "next" at the UI level anymore.
+               bisect_next "$@" ;;
+       visualize|view)
+               bisect_visualize "$@" ;;
+       reset)
+               bisect_reset "$@" ;;
+       replay)
+               bisect_replay "$@" ;;
+       log)
+               bisect_log ;;
+       run)
+               bisect_run "$@" ;;
+       *)
+               usage ;;
+       esac
 esac