--- /dev/null
+# Add "winbind" to the daemon_list if you also want winbind to start.
+# Replace "smbd nmbd" by "samba4" if you want the active directory domain controller part or the ntvfs
+# file server part or the rpc proxy to start.
+# Note that samba4 controls 'smbd' by itself, thus it can't be started manually. You can, however,
+# tweak the behaviour of a samba4-controlled smbd by modifying your '/etc/samba/smb.conf' file
+# accordingly.
+daemon_list="smbd nmbd"
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+my_service_name="samba"
+my_service_PRE="unset TMP TMPDIR"
+my_service_POST=""
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+smbd_start_options="-D"
+smbd_start="start-stop-daemon --start --exec /usr/sbin/smbd -- ${smbd_start_options}"
+smbd_stop="start-stop-daemon --stop --exec /usr/sbin/smbd"
+smbd_reload="killall -HUP smbd"
+
+nmbd_start_options="-D"
+nmbd_start="start-stop-daemon --start --exec /usr/sbin/nmbd -- ${nmbd_start_options}"
+nmbd_stop="start-stop-daemon --stop --exec /usr/sbin/nmbd"
+nmbd_reload="killall -HUP nmbd"
+
+samba4_start_options=""
+samba4_start="start-stop-daemon --start --exec /usr/sbin/samba -- ${samba4_start_options}"
+samba4_stop="start-stop-daemon --stop --exec /usr/sbin/samba"
+samba4_reload="killall -HUP samba"
+
+winbind_start_options=""
+winbind_start="start-stop-daemon --start --exec /usr/sbin/winbindd -- ${winbind_start_options}"
+winbind_stop="start-stop-daemon --stop --exec /usr/sbin/winbindd"
+winbind_reload="killall -HUP winbindd"
+
--- /dev/null
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Id$
+
+extra_started_commands="reload"
+piddir="/var/run/samba"
+
+depend() {
+ after slapd
+ need net
+ use cupsd
+}
+
+DAEMONNAME="${SVCNAME##samba.}"
+[ "${DAEMONNAME}" != "samba" ] && daemon_list=${DAEMONNAME}
+
+signal_do() {
+ local signal="$1"
+ [ -z "${signal}" ] && return 0
+
+ local result=0 last_result=0 daemon= cmd_exec=
+ for daemon in ${daemon_list} ; do
+ eval cmd_exec=\$${daemon}_${signal}
+ if [ -n "${cmd_exec}" ]; then
+ ebegin "${my_service_name} -> ${signal}: ${daemon}"
+ #echo ${cmd} '->' ${!cmd}
+ ${cmd_exec} > /dev/null
+ last_result=$?
+ eend ${last_result}
+ fi
+ result=$(( ${result} + ${last_result} ))
+ done
+ return ${result}
+}
+
+start() {
+ ${my_service_PRE}
+ [ -d "${piddir}" ] || mkdir -p "${piddir}"
+ signal_do start && return 0
+
+ eerror "Error: starting services (see system logs)"
+ signal_do stop
+ return 1
+}
+stop() {
+ ${my_service_PRE}
+ if signal_do stop ; then
+ ${my_service_POST}
+ return 0
+ fi
+}
+reload() {
+ ${my_service_PRE}
+ signal_do reload
+}
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
<herd>samba</herd>
-<maintainer>
- <email>samba@gentoo.org</email>
- <name>Samba Team</name>
-</maintainer>
-<longdescription>
-Samba is an Open Source/Free Software suite that provides seamless file and print services to SMB/CIFS clients. Integration with various accounting and antivirus backends. License: GNU General Public License.
-</longdescription>
-<use>
- <flag name="ads">Enable Active Directory support</flag>
- <flag name="swat">Enables support for swat configuration gui</flag>
- <flag name="winbind">Enables support for the winbind auth daemon</flag>
- <flag name="client">Enables the client part</flag>
- <flag name="server">Enables the server part</flag>
- <flag name="netapi">Enable building of netapi bits</flag>
- <flag name="addns">Enable AD DNS integration</flag>
- <flag name="aio">Enable asynchronous IO support</flag>
- <flag name="cluster">Enable support for clustering</flag>
- <flag name="dmapi">Enable support for DMAPI. This currently works only in combination with XFS.</flag>
- <flag name="ldb">Enable the ldb tools</flag>
- <flag name="quota">Enables support for user quotas</flag>
- <flag name="smbclient">Enable smbclient tool</flag>
- <flag name="smbsharemodes">Enable special smb share modes (?) </flag>
- <flag name="smbtav2">Enable Samba Traffic Analyzer version 2 </flag>
- <flag name="iprint">Enabling iPrint technology by Novell</flag>
-</use>
+ <maintainer>
+ <email>samba@gentoo.org</email>
+ <name>Samba Team</name>
+ </maintainer>
+ <longdescription>
+ Samba is an Open Source/Free Software suite that provides seamless file and print services to SMB/CIFS clients. Integration with various accounting and antivirus backends. License: GNU General Public License.
+ </longdescription>
+ <use>
+ <flag name="addc">Enable Active Directory Domain Controller support</flag>
+ <flag name="ads">Enable Active Directory support</flag>
+ <flag name="swat">Enables support for swat configuration gui</flag>
+ <flag name="winbind">Enables support for the winbind auth daemon</flag>
+ <flag name="client">Enables the client part</flag>
+ <flag name="server">Enables the server part</flag>
+ <flag name="netapi">Enable building of netapi bits</flag>
+ <flag name="addns">Enable AD DNS integration</flag>
+ <flag name="aio">Enable asynchronous IO support</flag>
+ <flag name="cluster">Enable support for clustering</flag>
+ <flag name="dmapi">Enable support for DMAPI. This currently works only in combination with XFS.</flag>
+ <flag name="ldb">Enable the ldb tools</flag>
+ <flag name="quota">Enables support for user quotas</flag>
+ <flag name="smbclient">Enable smbclient tool</flag>
+ <flag name="smbsharemodes">Enable special smb share modes (?) </flag>
+ <flag name="smbtav2">Enable Samba Traffic Analyzer version 2 </flag>
+ <flag name="system-mitkrb5">Use <pkg>app-crypt/mit-krb5</pkg> instead of
+ <pkg>app-crypt/heimdal</pkg>.</flag>
+ <flag name="iprint">Enabling iPrint technology by Novell</flag>
+ </use>
</pkgmetadata>
--- /dev/null
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+PYTHON_COMPAT=( python2_7 )
+PYTHON_REQ_USE='threads(+)'
+
+inherit python-single-r1 waf-utils multilib linux-info systemd eutils
+
+MY_PV="${PV/_rc/rc}"
+MY_P="${PN}-${MY_PV}"
+
+SRC_PATH="stable"
+[[ ${PV} = *_rc* ]] && SRC_PATH="rc"
+
+SRC_URI="mirror://samba/${SRC_PATH}/${MY_P}.tar.gz"
+KEYWORDS="~amd64 ~x86"
+[[ ${PV} = *_rc* ]] && KEYWORDS=""
+
+DESCRIPTION="Samba Suite Version 4"
+HOMEPAGE="http://www.samba.org/"
+LICENSE="GPL-3"
+
+SLOT="0"
+
+IUSE="acl addc addns ads aio avahi client cluster cups dmapi fam gnutls iprint
+ldap pam quota selinux syslog +system-mitkrb5 systemd test winbind"
+
+# sys-apps/attr is an automagic dependency (see bug #489748)
+# sys-libs/pam is an automagic dependency (see bug #489770)
+CDEPEND="${PYTHON_DEPS}
+ dev-libs/iniparser:0
+ dev-libs/popt
+ sys-libs/readline:=
+ virtual/libiconv
+ dev-python/subunit[${PYTHON_USEDEP}]
+ >=net-libs/socket_wrapper-1.1.2
+ sys-apps/attr
+ sys-libs/libcap
+ >=sys-libs/ldb-1.1.20
+ sys-libs/ncurses:0=
+ >=sys-libs/nss_wrapper-1.0.2
+ >=sys-libs/ntdb-1.0[python,${PYTHON_USEDEP}]
+ >=sys-libs/talloc-2.1.2[python,${PYTHON_USEDEP}]
+ >=sys-libs/tdb-1.3.6[python,${PYTHON_USEDEP}]
+ >=sys-libs/tevent-0.9.25
+ >=sys-libs/uid_wrapper-1.0.1
+ sys-libs/zlib
+ virtual/pam
+ acl? ( virtual/acl )
+ addns? ( net-dns/bind-tools[gssapi] )
+ aio? ( dev-libs/libaio )
+ cluster? ( >=dev-db/ctdb-1.0.114_p1 )
+ cups? ( net-print/cups )
+ dmapi? ( sys-apps/dmapi )
+ fam? ( virtual/fam )
+ gnutls? ( dev-libs/libgcrypt:0
+ >=net-libs/gnutls-1.4.0 )
+ ldap? ( net-nds/openldap )
+ system-mitkrb5? ( app-crypt/mit-krb5 )
+ !system-mitkrb5? ( >=app-crypt/heimdal-1.5[-ssl] )
+ systemd? ( sys-apps/systemd:0= )"
+DEPEND="${CDEPEND}
+ virtual/pkgconfig"
+RDEPEND="${CDEPEND}
+ client? ( net-fs/cifs-utils[ads?] )
+ selinux? ( sec-policy/selinux-samba )
+"
+
+REQUIRED_USE="addc? ( gnutls )
+ ads? ( acl gnutls ldap )
+ ${PYTHON_REQUIRED_USE}"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=( "${FILESDIR}/${PN}-4.2.3-heimdal_compilefix.patch" )
+
+CONFDIR="${FILESDIR}/$(get_version_component_range 1-2)"
+
+WAF_BINARY="${S}/buildtools/bin/waf"
+
+pkg_setup() {
+ python-single-r1_pkg_setup
+ if use aio ; then
+ if ! linux_config_exists || ! linux_chkconfig_present AIO; then
+ ewarn "You must enable AIO support in your kernel config, "
+ ewarn "to be able to support asynchronous I/O. "
+ ewarn "You can find it at"
+ ewarn
+ ewarn "General Support"
+ ewarn " Enable AIO support "
+ ewarn
+ ewarn "and recompile your kernel..."
+ fi
+ fi
+ if ! use pam ; then
+ ewarn "You have pam USE flag disabled!"
+ ewarn "Unfortunately we still have to hard depend on virtual/pam as samba upstream"
+ ewarn "still unconditionally links libauth4-samba4.so library to libpam.so once being"
+ ewarn "found on the sytem."
+ ewarn "Disabling the pam USE flag only disables installation of samba's pam authenti-"
+ ewarn "cation modules."
+ fi
+}
+
+src_prepare() {
+ epatch ${PATCHES[@]}
+}
+
+src_configure() {
+ local myconf=()
+ myconf=(
+ --enable-fhs
+ --sysconfdir=/etc
+ --localstatedir=/var
+ --with-modulesdir=/usr/$(get_libdir)/samba
+ --with-piddir=/var/run/${PN}
+ --bundled-libraries=NONE
+ --builtin-libraries=NONE
+ --disable-rpath
+ --disable-rpath-install
+ --nopyc
+ --nopyo
+ $(use_with acl acl-support)
+ $(usex addc '' '--without-ad-dc')
+ $(use_with addns dnsupdate)
+ $(use_with ads)
+ $(usex ads '--with-shared-modules=idmap_ad' '')
+ $(use_with aio aio-support)
+ $(usex cluster '--with-ctdb-dir=/usr' '')
+ $(use_enable avahi)
+ $(use_with cluster cluster-support)
+ $(use_enable cups)
+ $(use_with dmapi)
+ $(use_with fam)
+ $(use_enable gnutls)
+ $(use_enable iprint)
+ $(use_with ldap)
+ $(use_with pam)
+ $(use_with pam pam_smbpass)
+ $(usex pam "--with-pammodulesdir=/$(get_libdir)/security" '')
+ $(use_with quota quotas)
+ $(use_with syslog)
+ $(use_with systemd)
+ $(usex system-mitkrb5 '--with-system-mitkrb5' '')
+ $(use_with winbind)
+ $(usex test '--enable-selftest' '')
+ )
+
+ CPPFLAGS="-I${SYSROOT}/usr/include/et ${CPPFLAGS}" \
+ waf-utils_src_configure ${myconf[@]}
+}
+
+src_install() {
+ waf-utils_src_install
+
+ # install ldap schema for server (bug #491002)
+ if use ldap ; then
+ insinto /etc/openldap/schema
+ doins examples/LDAP/samba.schema
+ fi
+
+ # Make all .so files executable
+ find "${D}" -type f -name "*.so" -exec chmod +x {} +
+
+ # install example config file
+ insinto /etc/samba
+ doins examples/smb.conf.default
+
+ # Install init script and conf.d file
+ newinitd "${CONFDIR}/samba4.initd-r1" samba
+ newconfd "${CONFDIR}/samba4.confd" samba
+
+ systemd_dotmpfilesd "${FILESDIR}"/samba.conf
+ systemd_dounit "${FILESDIR}"/nmbd.service
+ systemd_dounit "${FILESDIR}"/smbd.{service,socket}
+ systemd_newunit "${FILESDIR}"/smbd_at.service 'smbd@.service'
+ systemd_dounit "${FILESDIR}"/winbindd.service
+ systemd_dounit "${FILESDIR}"/samba.service
+}
+
+src_test() {
+ "${WAF_BINARY}" test || die "test failed"
+}
+
+pkg_postinst() {
+ ewarn "Be aware the this release contains the best of all of Samba's"
+ ewarn "technology parts, both a file server (that you can reasonably expect"
+ ewarn "to upgrade existing Samba 3.x releases to) and the AD domain"
+ ewarn "controller work previously known as 'samba4'."
+
+ elog "For further information and migration steps make sure to read "
+ elog "http://samba.org/samba/history/${P}.html "
+ elog "http://samba.org/samba/history/${PN}-4.2.0.html and"
+ elog "http://wiki.samba.org/index.php/Samba4/HOWTO "
+}
SLOT="0"
-IUSE="acl addns ads aio avahi client cluster cups dmapi fam gnutls iprint
-ldap quota selinux syslog systemd test winbind"
+IUSE="acl addc addns ads aio avahi client cluster cups dmapi fam gnutls iprint
+ldap pam quota selinux syslog +system-mitkrb5 systemd test winbind"
# sys-apps/attr is an automagic dependency (see bug #489748)
# sys-libs/pam is an automagic dependency (see bug #489770)
CDEPEND="${PYTHON_DEPS}
- >=app-crypt/heimdal-1.5[-ssl]
dev-libs/iniparser:0
dev-libs/popt
sys-libs/readline:=
gnutls? ( dev-libs/libgcrypt:0
>=net-libs/gnutls-1.4.0 )
ldap? ( net-nds/openldap )
+ system-mitkrb5? ( app-crypt/mit-krb5 )
+ !system-mitkrb5? ( >=app-crypt/heimdal-1.5[-ssl] )
systemd? ( sys-apps/systemd:0= )"
DEPEND="${CDEPEND}
virtual/pkgconfig"
selinux? ( sec-policy/selinux-samba )
"
-REQUIRED_USE="ads? ( acl gnutls ldap )
+REQUIRED_USE="addc? ( gnutls )
+ ads? ( acl gnutls ldap )
${PYTHON_REQUIRED_USE}"
-RESTRICT="mirror"
-
S="${WORKDIR}/${MY_P}"
PATCHES=( "${FILESDIR}/${PN}-4.2.3-heimdal_compilefix.patch" )
pkg_setup() {
python-single-r1_pkg_setup
- if use aio; then
+ if use aio ; then
if ! linux_config_exists || ! linux_chkconfig_present AIO; then
ewarn "You must enable AIO support in your kernel config, "
ewarn "to be able to support asynchronous I/O. "
ewarn "and recompile your kernel..."
fi
fi
+ if ! use pam ; then
+ ewarn "You have pam USE flag disabled!"
+ ewarn "Unfortunately we still have to hard depend on virtual/pam as samba upstream"
+ ewarn "still unconditionally links libauth4-samba4.so library to libpam.so once being"
+ ewarn "found on the sytem."
+ ewarn "Disabling the pam USE flag only disables installation of samba's pam authenti-"
+ ewarn "cation modules."
+ fi
}
src_prepare() {
}
src_configure() {
- local myconf=''
- use "cluster" && myconf+=" --with-ctdb-dir=/usr"
- use "test" && myconf+=" --enable-selftest"
- myconf="${myconf} \
- --enable-fhs \
- --sysconfdir=/etc \
- --localstatedir=/var \
- --with-modulesdir=/usr/$(get_libdir)/samba \
- --with-pammodulesdir=/$(get_libdir)/security \
- --with-piddir=/var/run/${PN} \
- --disable-rpath \
- --disable-rpath-install \
- --nopyc \
- --nopyo \
- --bundled-libraries=NONE \
- --builtin-libraries=NONE \
- $(use_with addns dnsupdate) \
- $(use_with acl acl-support) \
- $(use_with ads) \
- $(use_with aio aio-support) \
- $(use_enable avahi) \
- $(use_with cluster cluster-support) \
- $(use_enable cups) \
- $(use_with dmapi) \
- $(use_with fam) \
- $(use_enable gnutls) \
- $(use_enable iprint) \
- $(use_with ldap) \
- --with-pam \
- --with-pam_smbpass \
- $(use_with quota quotas) \
- $(use_with syslog) \
- $(use_with systemd) \
+ local myconf=()
+ myconf=(
+ --enable-fhs
+ --sysconfdir=/etc
+ --localstatedir=/var
+ --with-modulesdir=/usr/$(get_libdir)/samba
+ --with-piddir=/var/run/${PN}
+ --bundled-libraries=NONE
+ --builtin-libraries=NONE
+ --disable-rpath
+ --disable-rpath-install
+ --nopyc
+ --nopyo
+ $(use_with acl acl-support)
+ $(usex addc '' '--without-ad-dc')
+ $(use_with addns dnsupdate)
+ $(use_with ads)
+ $(usex ads '--with-shared-modules=idmap_ad' '')
+ $(use_with aio aio-support)
+ $(usex cluster '--with-ctdb-dir=/usr' '')
+ $(use_enable avahi)
+ $(use_with cluster cluster-support)
+ $(use_enable cups)
+ $(use_with dmapi)
+ $(use_with fam)
+ $(use_enable gnutls)
+ $(use_enable iprint)
+ $(use_with ldap)
+ $(use_with pam)
+ $(use_with pam pam_smbpass)
+ $(usex pam "--with-pammodulesdir=/$(get_libdir)/security" '')
+ $(use_with quota quotas)
+ $(use_with syslog)
+ $(use_with systemd)
+ $(usex system-mitkrb5 '--with-system-mitkrb5' '')
$(use_with winbind)
- "
- use "ads" && myconf+=" --with-shared-modules=idmap_ad"
+ $(usex test '--enable-selftest' '')
+ )
CPPFLAGS="-I${SYSROOT}/usr/include/et ${CPPFLAGS}" \
- waf-utils_src_configure ${myconf}
+ waf-utils_src_configure ${myconf[@]}
}
src_install() {
projects / gentoo.git / commitdiff