--- /dev/null
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-www/mod_gzip/files/10_mod_gzip.conf,v 1.1 2005/01/08 21:29:07 hollow Exp $
+
+<IfDefine GZIP>
+ <IfModule !mod_gzip.c>
+ LoadModule gzip_module modules/mod_gzip.so
+ </IfModule>
+</IfDefine>
+
+#
+# See http://www.schroepl.net/projekte/mod_gzip/ for details
+#
+
+#######################################
+### Apache configuration directives ###
+### for mod_gzip 1.3.26.1a ###
+#######################################
+
+##########################
+### loading the module ###
+##########################
+
+# ---------------------------------------------------------------------
+# load DLL / Win32:
+# LoadModule gzip_module modules/ApacheModuleGzip.dll
+#
+# load DSO / UNIX:
+# LoadModule gzip_module modules/mod_gzip.so
+#
+# (none of both if module has been compiled in statically;
+# the exact file name may depend upon the exact compilation method used
+# for this module)
+# ---------------------------------------------------------------------
+
+<IfModule mod_gzip.c>
+
+########################
+### responsibilities ###
+########################
+
+# ---------------------------------------------------------------------
+# use mod_gzip at all?
+ mod_gzip_on Yes
+# (you can especially enable mod_gzip inside the central server
+# configuration but disable it inside some directories ot virtual
+# hosts by using this directive.)
+# ---------------------------------------------------------------------
+
+######################################
+### statically precompressed files ###
+######################################
+
+# ---------------------------------------------------------------------
+# let mod_gzip perform 'partial content negotiation'?
+ mod_gzip_can_negotiate Yes
+# (if this option is active and a static file is to be served in com-
+# pressed for, then mod_gzip will look for a static precompressed
+# version of this file with a defined additional extension - see next
+# directive - which would be delivered with priority. This would allow
+# for avoiding to repeatedly compress the same static file and thus
+# saving CPU time.
+# No dynamic caching of this file is provided; currently the user
+# himself is responsible for creating and updating the precompressed
+# file's content.
+# From version 1.3.19.2a mod_gzip automatically recognizes whether
+# a statically precompressed file is older than its uncompressed
+# original and in this case will serve the content of the original
+# file in uncompressed form - as to rather serve correct data than
+# outdated ones ...)
+
+# ---------------------------------------------------------------------
+# extension (suffix) for statically precompressed files
+mod_gzip_static_suffix .gz
+AddEncoding gzip .gz
+# (effect: see previous directive; this string will be appended to the
+# name of the original file.
+# be sure to configure the encoding 'gzip' for this extension as well,
+# because mod_gzip doesn't serve the content itself but simply generates
+# an Apache internal redirection to this URL. Therefore the remaining
+# Apache configuration is responsible for setting the 'Content-Encoding'
+# header properly ...
+# prior to version 1.3.19.2a this value was not configurable.)
+
+# ---------------------------------------------------------------------
+# automatic updates for statically precompressed files
+mod_gzip_update_static No
+# (if set to 'Yes', this directive (being new in version 1.3.26.1a) would
+# cause mod_gzip to automatically update an outdated version of any
+# statically precompressed file during the request, i. e. compress the
+# originally requested file and overwrite the precompressed variant
+# file with it!
+# for each automatic update of this type, mod_gzip will write a message
+# of the severity 'notice' into the Apache error_log.
+# while doing so, mod_gzip will directly read the original file's content.
+# therefore this content cannot be interpreted by any other Apache module
+# during the request. this might possibly not be what you want - hopefully
+# it will be what most users want, because it works fast this way.
+# use this configuration with a lot of care, and be sure that you don't
+# inadvertantly cause valuable files within the URL tree to be overwritten.
+# this isn't a feature to be used for mass hosting servers, especially
+# because mod_gzip might experience access control problems there - the
+# userid the Apache processes are running under need to have write access
+# to the precompressed files of all users, which may not automatically be
+# the case.)
+# ---------------------------------------------------------------------
+
+###################
+### bureaucracy ###
+###################
+# ---------------------------------------------------------------------
+# display status for mod_gzip
+mod_gzip_command_version '/mod_gzip_status'
+# (defines an URL to display the status of mod_gzip; can be specified
+# individually for each installation and protected against access via
+# <Location> section for privacy reasons)
+# ---------------------------------------------------------------------
+# The status display will look like this:
+# mod_gzip is available...
+# mod_gzip_version = 1.3.26.1a
+# mod_gzip_on = Yes/No
+# and thus will provide information about
+# - mod_gzip being installed at the server and working correctly,
+# - which version has been installed and
+# - whether mod_gzip has been set 'active' for this Location
+# (-> mod_gzip_on)
+# ---------------------------------------------------------------------
+
+#######################
+### data management ###
+#######################
+
+# ---------------------------------------------------------------------
+# Working directory for temporary files and the compression cache
+# if not specified, the following default values are used:
+# [Win32=c:\temp], [UNIX=/tmp]
+# mod_gzip_temp_dir /tmp
+# (This directory must already exist and the userid being used for
+# running the Apache server must have read and write access to this
+# directory.
+# Unlike other Apache directives an absolute path name must be specified
+# here; a relative value will not be interpreted relatively to ServerRoot.
+# This pastname must NOT be terminated with '/'.
+# For maximum performance this directory should be located on a RAM disk,
+# if the file system isn't already being cached efficiently
+# ---------------------------------------------------------------------
+# Save temporary work files [Yes, No]
+mod_gzip_keep_workfiles No
+# (one file per HTTP request - set to 'yes' for debugging purpose only!)
+# ---------------------------------------------------------------------
+
+##################
+### file sizes ###
+##################
+
+# ---------------------------------------------------------------------
+# minimum size (in bytes) for files to be compressed
+mod_gzip_minimum_file_size 500
+# (for very small files compression will produce only small absolute gains
+# [you will still save about 50% of the content, but some additional
+# 500 bytes of HTTP and TCP headers will always remain uncompressed],
+# but still produce CPU load for both client and server)
+# ---------------------------------------------------------------------
+# maximum size (in bytes) for files to be compressed
+mod_gzip_maximum_file_size 500000
+# (for very large files compression may eventually take rather long and
+# thus delay the start of the transmission.
+# Furthermode a limitation at this point prevents the server from
+# producing output of unlimited size in case of some endless loop
+# inside a CGI script - or even trying to compress streaming data -
+# which might otherwise cause the creation of a temporary file of
+# any size and even fill up the whole hard disk.
+# On the other hand, compression will have a much more perceivable
+# subjective effect for large files ... so be sure to fine-tune this
+# according to your requirements.)
+# ---------------------------------------------------------------------
+# maximum size (in bytes) for files to be compressed in memory
+mod_gzip_maximum_inmem_size 60000
+# (larger files will be compressed into the temp file directory; adapt
+# this value to your server's available main memory.
+# In mod_gzip 1.3.19.x larger values will automatically be limited to
+# 60000 because some operating systems are said to have problems
+# allocating more than 64 kb of memory at a time.
+# ---------------------------------------------------------------------
+
+####################
+### requirements ###
+####################
+
+# (see chapter about caching for problems when using these directives.)
+# ---------------------------------------------------------------------
+# Required HTTP version of the client
+# Possible values: 1000 = HTTP/1.0, 1001 = HTTP/1.1, ...
+# This directive uses the same numeric protocol values as Apache does
+# internally
+mod_gzip_min_http 1000
+# (By using this directive you may exclude old browsers, search engines
+# etc. from the compression procedure: if the user agent doesn't
+# declare itself capable of understanding at least the HTTP level
+# specified here, only uncompressed data will be delivered - no matter
+# what else it claims to be able to. The value of '1001' will especially
+# exclude Netscape 4.x. and a lot of proxy servers.)
+# ---------------------------------------------------------------------
+# HTTP methods to be handled
+# Possible values: 'GET', 'POST' or a list of both values.
+mod_gzip_handle_methods GET POST
+# (By using this directive you may particularly exclude POST requests
+# from the compression procedure. There are known cases where the
+# handling of these requests by previous mod_gzip versions could cause
+# problems.
+# Before version 1.3.19.2a this value was not configurable.)
+# ---------------------------------------------------------------------
+
+###############
+### filters ###
+###############
+
+# ---------------------------------------------------------------------
+# which files are to be compressed?
+#
+# The order of processing during each of both phases is not important,
+# but to trigger the compression of a request's content this request
+# a) must match at least one include rule in each of both phases and
+# b) must not match an exclude rule in any of both phases.
+# These rules are not minimal, they are meant to serve as example only.
+#
+# phase 1: (reqheader, uri, file, handler)
+# ========================================
+# (see chapter about caching for problems when using 'reqheader' type
+# filter rules.)
+# NO: special broken browsers which request for gzipped content
+# but then aren't able to handle it correctly
+mod_gzip_item_exclude reqheader "User-agent: Mozilla/4.0[678]"
+#
+# JA: HTML-Dokumente
+mod_gzip_item_include file \.html$
+#
+# NO: include files / JavaScript & CSS (due to Netscape4 bugs)
+mod_gzip_item_exclude file \.js$
+mod_gzip_item_exclude file \.css$
+#
+# NO: already compressed files
+mod_gzip_item_exclude file \.bz2$
+mod_gzip_item_exclude file \.tbz2$
+mod_gzip_item_exclude file \.gz$
+#
+# YES: CGI scripts
+mod_gzip_item_include file \.pl$
+mod_gzip_item_include handler ^cgi-script$
+#
+# phase 2: (mime, rspheader)
+# ===========================
+# YES: normal HTML files, normal text files, Apache directory listings
+mod_gzip_item_include mime ^text/html$
+mod_gzip_item_include mime ^text/plain$
+mod_gzip_item_include mime ^httpd/unix-directory$
+#
+# NO: images (GIF etc., will rarely ever save anything)
+mod_gzip_item_exclude mime ^image/
+# ---------------------------------------------------------------------
+# In fact mod_gzip is checking only the first 4 characters of the 1st
+# operand (in case of uri even the first 2 characters only, as to
+# allow for values like url).
+# ---------------------------------------------------------------------
+# The table for mod_gzip_item rules (include and exclude) cannot contain
+# more than 256 entries; when this number is exceeded mod_gzip will
+# output the message "mod_gzip: ERROR: Item index is full"
+# and report a configuration error to the Apache server.
+# ---------------------------------------------------------------------
+# The directive values described here are meant to describe the requests
+# elected for compression most exactly.
+# Especially for the mime rules it has to be made clear that the HTTP
+# header 'Content-Type' (that will be checked by mod_gzip for this rule)
+# in some cases may contain not only a MIME type but additionally a
+# character set description (charset) as well.
+# If this is the case for the requests to be handled then you need to
+# remove the '$' char at the end of the corresponding value so that now
+# only the prefix of this value will be tested for matching.
+# ---------------------------------------------------------------------
+
+##########################
+### transfer encodings ###
+##########################
+
+# ---------------------------------------------------------------------
+# Allow mod_gzip to eliminate the HTTP header
+# 'Transfer-encoding: chunked'
+# and join the chunks to one (compressable) packet
+mod_gzip_dechunk Yes
+# (this is required for handling several types of dynamically generated
+# contents, especially for CGI and SSI pages, but also for pages produced
+# by some Java Servlet interpreters.
+# ---------------------------------------------------------------------
+
+###############
+### logging ###
+###############
+
+# ---------------------------------------------------------------------
+# Extended log format (for testing the compression effect)
+LogFormat "%h %l %u %t \"%V %r\" %<s %b mod_gzip: %{mod_gzip_result}n In:%{mod_gzip_input_size}n -< Out:%{mod_gzip_output_size}n = %{mod_gzip_compression_ratio}n pct." common_with_mod_gzip_info2
+# ---------------------------------------------------------------------
+# Create additional log file
+CustomLog logs/mod_gzip.log common_with_mod_gzip_info2
+# (surely you can redefine your normal log file format, but you mal well
+# keep its format standard compatible for evaluation by standard web
+# analysis tools. So we just create another log file.)
+# ---------------------------------------------------------------------
+# Volume computation of the delivered files inside the Apache access_log:
+# count HTTP header size (in bytes) as part of total output size
+mod_gzip_add_header_count Yes
+# (This will be more than the pure document content, but it will more
+# realistically describe the total output traffic of the HTTP request)
+# ---------------------------------------------------------------------
+
+
+###############
+### proxies ###
+###############
+# ---------------------------------------------------------------------
+# sending a 'Vary' HTTP header
+mod_gzip_send_vary Yes
+# (see chapter about caching for this directive.)
+# don't change this unless you absolutely know what you are doing!
+# ---------------------------------------------------------------------
+
+</IfModule>
projects / gentoo.git / commitdiff