## used to build a livecd-stage2 iso image
## John Davis <zhen@gentoo.org>
+## Chris Gianelloni <wolf31o2@gentoo.org>
# subarch can be any of the supported Catalyst subarches (like athlon-xp). Refer
-# to the catalyst reference manual (http://www.gentoo.org/proj/en/releng/catalyst) for supported arches.
+# to the catalyst reference manual:
+# (http://www.gentoo.org/proj/en/releng/catalyst) for supported arches.
# example:
# subarch: athlon-xp
subarch:
-# version stamp is an identifier for the build. can be anything you want it to be, but it
-# is usually a date.
+# version stamp is an identifier for the build. can be anything you want it
+# to be, but it is usually a date.
# example:
-# version_stamp: 2004.2
+# version_stamp: 2004.3
version_stamp:
-# target specifies what type of build Catalyst is to do. check the catalyst reference manual
-# for supported targets.
+# target specifies what type of build Catalyst is to do.
+# check the catalyst reference manual for supported targets.
# example:
-# target: stage2
+# target: livecd-stage2
target: livecd-stage2
-# rel_type defines what kind of build we are doing. usually, default will suffice.
+# rel_type defines what kind of build we are doing.
+# usually, default will suffice.
# example:
# rel_type: default
rel_type:
# system profile used to build the media
# example:
-# profile: default-x86-2004.0
+# profile: default-linux/x86/2004.3
profile:
# which snapshot to use
# example:
-# snapshot: 20040614
+# snapshot: 20041022
snapshot:
# where the seed stage comes from, path is relative to $clst_sharedir (catalyst.conf)
# example:
-# default/stage3-x86-2004.1
+# default/stage3-x86-2004.3
source_subpath:
-# which cdfs to use. valid values are zisofs, squashfs, cloop, gcloop, and none
-livecd/cdfstype: zisofs
+# which cdfs to use. valid values are:
+# zisofs, squashfs, cloop, gcloop, and noloop
+livecd/cdfstype: squashfs
# archscript and runscript to use. DO NOT CHANGE THESE UNLESS YOU KNOW WHAT YOU ARE DOING.
livecd/archscript: /usr/lib/catalyst/livecd/runscript/x86-archscript.sh
# (optional) run this script in the LiveCD chroot to tweak the LiveCD fs
# livecd/fsscript: /tmp/myscript.sh
-# (optional) files to be added to the final livecd product. note that they *are not* in the loopback
-# fs itself, but in /mnt/cdrom when the cd is booted.
+# (optional) files to be added to the final livecd product. note that they
+# *are not* in the loopback fs itself, but in /mnt/cdrom when the cd is booted.
+# the layout is in the overlay mirrors how it will be on the LiveCD.
# livecd/overlay: /tmp/files_for_livecd
-# "global" arguments that are to be passed to genkernel
-#livecd/gk_mainargs: --makeopts=-j3
+# (optional) "global" arguments that are to be passed to genkernel
+# livecd/gk_mainargs: --makeopts=-j3
-# tweaks things such as the MOTD for release LiveCDs
-#livecd/type: gentoo-release-universal
+# (optional) tweaks things such as the MOTD for release LiveCDs
+# livecd/type: gentoo-release-universal
-# the standard Gentoo release MOTD is included with Catalyst
-#livecd/motd: /usr/lib/catalyst/livecd/files/motd.txt
+# (optional) the standard Gentoo release MOTD is included with Catalyst
+# livecd/motd: /usr/lib/catalyst/livecd/files/motd.txt
-# Put directories, files (README,Handbook), etc that you want to show up in /mnt/cdrom
-# when the LiveCD is booted in the overlay. The layout that is in the overlay
-# mirrors how it will be on the LiveCD.
-#livecd/overlay: /tmp/livecd-overlay
+# (optional) list of modules that you want to blacklist for hotplug
+# livecd/modblacklist: 8139cp
-# list of modules that you want to blacklist for hotplug
-#livecd/modblacklist: siimage eth1394
+# (optional) splash type you wish to use on your LiveCD, this can be either
+# gensplash or bootsplash
+# livecd/splash_type: gensplash
-# bootsplash theme to use - must be present in /etc/bootsplash of the
-# livecd-stage1.
-#livecd/bootsplash: livecd-2004.1
+# (optional) splash theme to use - must be present in /etc/splash or
+# /etc/bootsplash of the LiveCD before the initrd is completed.
+# livecd/splash_theme: livecd-2004.3
-# list of services to add to the specified runlevel
-#livecd/rcadd: mkxf86config:default alsasound:boot
+# (optional) list of services to add to the specified runlevel
+# livecd/rcadd: mkxf86config:default alsasound:default
-# list of services to delete from the specified runlevel
-#livecd/rcdel: net.eth0:boot
+# (optional) list of services to delete from the specified runlevel
+# livecd/rcdel: net.eth0:boot
-# xinitrc to use on the livecd
-#livecd/xinitrc: /tmp/livecd_xinitrc
+# (optional) xinitrc to use on the livecd
+# livecd/xinitrc: /tmp/livecd_xinitrc
-# directory that is to be overlayed on the livecd rootfs (the booted fs)
-#livecd/root_overlay: /tmp/livecd-root-overlay
+# (optional) directory that is to be overlayed on the livecd rootfs
+# (the booted fs)
+# livecd/root_overlay: /tmp/livecd-root-overlay
-# if you want your livecd to use udev instead of devfs, uncomment this line
-#livecd/devmanager: udev
+# (optional) if you want your livecd to use udev instead of devfs,
+# uncomment this line
+# livecd/devmanager: udev
# let catalyst know the names of the kernels that you want it to build
boot/kernel: gentoo smp
-# for the first kernel (gentoo), let catalyst know what sources to use and what kernel config to use
+# for the first kernel (gentoo), let catalyst know what sources to use and
+# what kernel config to use
boot/kernel/gentoo/sources: sys-kernel/gentoo-sources
boot/kernel/gentoo/config:
-# per-kernel arguments for genkernel
-#boot/kernel/gentoo/gk_kernargs: --makeopts=-j2
+# (optional) per-kernel arguments for genkernel
+# boot/kernel/gentoo/gk_kernargs: --makeopts=-j2
# same as the gentoo kernel above, just different data
boot/kernel/smp/sources: sys-kernel/gentoo-dev-sources
boot/kernel/smp/config:
-# per-kernel arguments for genkernel
-#boot/kernel/smp/gk_kernargs: --makeopts=-j1
+# (optional) per-kernel arguments for genkernel
+# boot/kernel/smp/gk_kernargs: --makeopts=-j1
# this next line sets any USE settings you want exported to the environment for
# your kernel build *and* during the build of any kernel-dependent packages
# allows you to have 2 identical kernels on the livecd built with different
# options, and each with their own modules dir in /lib/modules (otherwise
# the second kernel would overwrite the first modules directory.
-boot/kernel/gentoo/extraversion: livecd
-boot/kernel/smp/extraversion: livecd
+boot/kernel/gentoo/extraversion: gentoo
+boot/kernel/smp/extraversion: smp
# this next line is for merging kernel-dependent packages after your kernel
# is built. This is where you merge third-party ebuilds that contain kernel
# modules.
boot/kernel/gentoo/packages:
pcmcia-cs
+ speedtouch
slmodem
- linux-wlan-ng
- iptables
+ globespan-adsl
hostap-driver
+ hostap-utils
ipw2100
boot/kernel/smp/packages:
pcmcia-cs
- iptables
+ speedtouch
+ slmodem
+ globespan-adsl
hostap-driver
+ hostap-utils
ipw2100
# remove gcc from the list if you want distcc
livecd/unmerge:
- autoconf automake gcc bin86 binutils libtool m4 bison ld.so make perl patch linux-headers man-pages
- sash bison flex gettext texinfo ccache addpatches man groff lib-compat python miscfiles
+ autoconf
+ automake
+ gcc
+ bin86
+ binutils
+ libtool
+ m4
+ bison
+ ld.so
+ make
+ perl
+ patch
+ linux-headers
+ man-pages
+ sash
+ bison
+ flex
+ gettext
+ texinfo
+ ccache
+ addpatches
+ man
+ groff
+ lib-compat
+ python
+ miscfiles
+
livecd/empty:
/var/tmp
/var/cache
projects / catalyst.git / commitdiff