--- /dev/null
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+GENTOO_DEPEND_ON_PERL="no"
+
+inherit eutils linux-info perl-module python-r1 base
+
+DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+IUSE="perl python static-libs"
+
+DEPEND="virtual/libusb:0
+ >=dev-libs/libg15-1.2.4
+ >=dev-libs/libg15render-1.2
+ perl? (
+ dev-lang/perl
+ dev-perl/GDGraph
+ >=dev-perl/Inline-0.4
+ )
+ python? ( ${PYTHON_DEPS} )"
+RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
+
+PATCHES=(
+ "${FILESDIR}/${P}-forgotten-open-mode.patch"
+ "${FILESDIR}/${P}-overflow-fix.patch"
+)
+uinput_check() {
+ ebegin "Checking for uinput support"
+ local rc=1
+ linux_config_exists && linux_chkconfig_present INPUT_UINPUT
+ rc=$?
+
+ if [[ $rc -ne 0 ]] ; then
+ eerror "To use g15daemon, you need to compile your kernel with uinput support."
+ eerror "Please enable uinput support in your kernel config, found at:"
+ eerror
+ eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
+ eerror
+ eerror "Once enabled, you should have the /dev/input/uinput device."
+ eerror "g15daemon will not work without the uinput device."
+ fi
+}
+
+pkg_setup() {
+ linux-info_pkg_setup
+ uinput_check
+}
+
+src_unpack() {
+ unpack ${A}
+ if use perl; then
+ unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
+ fi
+ if use python; then
+ unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
+ fi
+}
+
+src_prepare() {
+ if use perl; then
+ perl-module_src_prepare
+ sed -i \
+ -e '1i#!/usr/bin/perl' \
+ "${S}"/contrib/testbindings.pl
+ else
+ # perl-module_src_prepare always calls base_src_prepare
+ base_src_prepare
+ fi
+}
+
+src_configure() {
+ econf \
+ --docdir="${EPREFIX}/usr/share/doc/${PF}" \
+ $(use_enable static-libs static)
+
+ if use perl; then
+ cd "${WORKDIR}/G15Daemon-0.2"
+ perl-module_src_configure
+ fi
+}
+
+src_compile() {
+ default
+
+ if use perl; then
+ cd "${WORKDIR}/G15Daemon-0.2"
+ perl-module_src_compile
+ fi
+}
+
+src_install() {
+ default
+
+ find "${ED}" -name '*.la' -exec rm -f {} +
+
+ # remove odd docs installed my make
+ rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage}
+
+ insinto /usr/share/${PN}/contrib
+ doins contrib/xmodmaprc
+ doins contrib/xmodmap.sh
+ if use perl; then
+ doins contrib/testbindings.pl
+ fi
+
+ newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
+ newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN}
+ dobin "${FILESDIR}/g15daemon-hotplug"
+ insinto /lib/udev/rules.d
+ doins "${FILESDIR}/99-g15daemon.rules"
+
+ insinto /etc
+ doins "${FILESDIR}"/g15daemon.conf
+
+ # Gentoo bug #301340, debian bug #611649
+ exeinto /usr/lib/pm-utils/sleep.d
+ doexe "${FILESDIR}"/20g15daemon
+
+ if use perl; then
+ ebegin "Installing Perl Bindings (G15Daemon.pm)"
+ cd "${WORKDIR}/G15Daemon-0.2"
+ docinto perl
+ perl-module_src_install
+ fi
+
+ if use python; then
+ ebegin "Installing Python Bindings (g15daemon.py)"
+ cd "${WORKDIR}/pyg15daemon"
+
+ python_foreach_impl python_domodule g15daemon.py
+
+ docinto python
+ dodoc AUTHORS
+ fi
+}
+
+pkg_postinst() {
+ elog "To use g15daemon, you need to add g15daemon to the default runlevel."
+ elog "This can be done with:"
+ elog "# /sbin/rc-update add g15daemon default"
+ elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
+ elog ""
+ elog "To have all new keys working in X11, you'll need create a "
+ elog "specific xmodmap in your home directory or edit the existent one."
+ elog ""
+ elog "Create the xmodmap:"
+ elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
+ elog ""
+ elog "Adding keycodes to an existing xmodmap:"
+ elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
+}
--- /dev/null
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+GENTOO_DEPEND_ON_PERL="no"
+
+inherit eutils linux-info perl-module python-r1 base
+
+DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
+HOMEPAGE="http://g15daemon.sourceforge.net/"
+SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS=""
+IUSE="perl python static-libs"
+
+DEPEND="virtual/libusb:0
+ >=dev-libs/libg15-9999
+ >=dev-libs/libg15render-1.2
+ perl? (
+ dev-lang/perl
+ dev-perl/GDGraph
+ >=dev-perl/Inline-0.4
+ )
+ python? ( ${PYTHON_DEPS} )"
+RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
+
+PATCHES=(
+ "${FILESDIR}/${P}-forgotten-open-mode.patch"
+ "${FILESDIR}/${P}-overflow-fix.patch"
+ "${FILESDIR}/${P}-g510-keys.patch"
+)
+
+uinput_check() {
+ ebegin "Checking for uinput support"
+ local rc=1
+ linux_config_exists && linux_chkconfig_present INPUT_UINPUT
+ rc=$?
+
+ if [[ $rc -ne 0 ]] ; then
+ eerror "To use g15daemon, you need to compile your kernel with uinput support."
+ eerror "Please enable uinput support in your kernel config, found at:"
+ eerror
+ eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
+ eerror
+ eerror "Once enabled, you should have the /dev/input/uinput device."
+ eerror "g15daemon will not work without the uinput device."
+ fi
+}
+
+pkg_setup() {
+ linux-info_pkg_setup
+ uinput_check
+}
+
+src_unpack() {
+ unpack ${A}
+ if use perl; then
+ unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
+ fi
+ if use python; then
+ unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
+ fi
+}
+
+src_prepare() {
+ if use perl; then
+ perl-module_src_prepare
+ sed -i \
+ -e '1i#!/usr/bin/perl' \
+ "${S}"/contrib/testbindings.pl
+ else
+ # perl-module_src_prepare always calls base_src_prepare
+ base_src_prepare
+ fi
+}
+
+src_configure() {
+ econf \
+ --docdir="${EPREFIX}/usr/share/doc/${PF}" \
+ $(use_enable static-libs static)
+
+ if use perl; then
+ cd "${WORKDIR}/G15Daemon-0.2"
+ perl-module_src_configure
+ fi
+}
+
+src_compile() {
+ default
+
+ if use perl; then
+ cd "${WORKDIR}/G15Daemon-0.2"
+ perl-module_src_compile
+ fi
+}
+
+src_install() {
+ default
+
+ find "${ED}" -name '*.la' -exec rm -f {} +
+
+ # remove odd docs installed my make
+ rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage}
+
+ insinto /usr/share/${PN}/contrib
+ doins contrib/xmodmaprc
+ doins contrib/xmodmap.sh
+ if use perl; then
+ doins contrib/testbindings.pl
+ fi
+
+ newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
+ newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN}
+ dobin "${FILESDIR}/g15daemon-hotplug"
+ insinto /lib/udev/rules.d
+ doins "${FILESDIR}/99-g15daemon.rules"
+
+ insinto /etc
+ doins "${FILESDIR}"/g15daemon.conf
+
+ # Gentoo bug #301340, debian bug #611649
+ exeinto /usr/lib/pm-utils/sleep.d
+ doexe "${FILESDIR}"/20g15daemon
+
+ if use perl; then
+ ebegin "Installing Perl Bindings (G15Daemon.pm)"
+ cd "${WORKDIR}/G15Daemon-0.2"
+ docinto perl
+ perl-module_src_install
+ fi
+
+ if use python; then
+ ebegin "Installing Python Bindings (g15daemon.py)"
+ cd "${WORKDIR}/pyg15daemon"
+
+ python_foreach_impl python_domodule g15daemon.py
+
+ docinto python
+ dodoc AUTHORS
+ fi
+}
+
+pkg_postinst() {
+ elog "To use g15daemon, you need to add g15daemon to the default runlevel."
+ elog "This can be done with:"
+ elog "# /sbin/rc-update add g15daemon default"
+ elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
+ elog ""
+ elog "To have all new keys working in X11, you'll need create a "
+ elog "specific xmodmap in your home directory or edit the existent one."
+ elog ""
+ elog "Create the xmodmap:"
+ elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
+ elog ""
+ elog "Adding keycodes to an existing xmodmap:"
+ elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
+}
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
GENTOO_DEPEND_ON_PERL="no"
-PYTHON_DEPEND="python? *"
-SUPPORT_PYTHON_ABIS="1"
ESVN_PROJECT=${PN}/trunk
ESVN_REPO_URI="https://${PN}.svn.sourceforge.net/svnroot/${ESVN_PROJECT}/${PN}-wip"
-inherit eutils linux-info perl-module python base subversion autotools
+inherit eutils linux-info perl-module python-r1 base subversion autotools
DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
HOMEPAGE="http://g15daemon.sourceforge.net/"
dev-lang/perl
dev-perl/GDGraph
>=dev-perl/Inline-0.4
- )"
+ )
+ python? ( ${PYTHON_DEPS} )"
RDEPEND="${DEPEND}"
+REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
PATCHES=(
"${FILESDIR}/${PN}-1.9.5.3-g510-keys.patch"
pkg_setup() {
linux-info_pkg_setup
uinput_check
- if use python; then
- python_pkg_setup
- fi
}
src_unpack() {
ebegin "Installing Python Bindings (g15daemon.py)"
cd "${WORKDIR}/pyg15daemon"
- installation() {
- insinto $(python_get_sitedir)
- doins g15daemon.py
- }
- python_execute_function installation
+ python_foreach_impl python_domodule g15daemon.py
docinto python
dodoc AUTHORS
}
pkg_postinst() {
- if use python; then
- python_mod_optimize g15daemon.py
- echo ""
- fi
-
elog "To use g15daemon, you need to add g15daemon to the default runlevel."
elog "This can be done with:"
elog "# /sbin/rc-update add g15daemon default"
elog "Adding keycodes to an existing xmodmap:"
elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
}
-
-pkg_postrm() {
- if use python; then
- python_mod_cleanup g15daemon.py
- fi
-}
projects / gentoo.git / commitdiff