--- /dev/null
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-util/subversion/subversion-1.1.1.ebuild,v 1.1 2004/11/07 13:36:41 pauldv Exp $
+
+inherit elisp-common libtool python eutils
+
+DESCRIPTION="A compelling replacement for CVS"
+SRC_URI="http://subversion.tigris.org/tarballs/${P/_rc/-rc}.tar.bz2"
+HOMEPAGE="http://subversion.tigris.org/"
+
+SLOT="0"
+LICENSE="Apache-1.1"
+KEYWORDS="~x86 ~sparc ~ppc ~amd64 ~alpha ~hppa"
+IUSE="ssl apache2 berkdb python emacs perl java jikes"
+
+S=${WORKDIR}/${P/_rc/-rc}
+
+#Allow for custion repository locations
+if [ "${SVN_REPOS_LOC}x" = "x" ]; then
+ SVN_REPOS_LOC="/var/svn"
+fi
+
+RDEPEND="python? ( >=dev-lang/python-2.0 )
+ apache2? ( >=net-www/apache-2.0.49 )
+ !apache2? ( !>=net-www/apache-2* )
+ !dev-libs/apr
+ python? ( || ( =dev-lang/swig-1.3.21
+ =dev-lang/swig-1.3.19
+ ) )
+ perl? ( !python? ( || ( =dev-lang/swig-1.3.21
+ =dev-lang/swig-1.3.19
+ ) )
+ >=dev-lang/perl-5.8 )
+ >=net-misc/neon-0.24.7
+ berkdb? ( =sys-libs/db-4*
+ java? ( virtual/jdk ) )
+ emacs? ( virtual/emacs )"
+
+DEPEND="${RDEPEND}
+ || (
+ >=sys-devel/autoconf-2.59
+ =sys-devel/autoconf-2.57*
+ )
+ !=sys-devel/autoconf-2.58"
+
+pkg_setup() {
+ if has_version =sys-devel/autoconf-2.58*; then
+ die "Subversion WILL NOT BUILD with autoconf-2.58"
+ fi
+
+ if use berkdb && has_version '<dev-util/subversion-0.34.0' && [ "${SVN_DUMPED}" == "" ]; then
+ einfo ""
+ ewarn ": Now you have $(best_version subversion)"
+ ewarn " Subversion has changed the repository filesystem schema from 0.34.0."
+ ewarn " So you MUST dump your repositories before upgrading."
+ ewarn ""
+ ewarn "After doing so call emerge with SVN_DUMPED=1 emerge !!"
+ einfo ""
+ einfo "More details on dumping:"
+ einfo "http://svn.collab.net/repos/svn/trunk/notes/repos_upgrade_HOWTO"
+ die "ensure that you dump your repository first"
+ fi
+
+ if use apache2; then
+ einfo "The apache2 subversion module will be built, and libapr from the"
+ einfo "apache package will be used instead of the included."
+ else
+ einfo "Please note that subversion and apache2 cannot be installed"
+ einfo "simultaneously without specifying the apache2 use flag. This is"
+ einfo "because subversion installs its own libapr and libapr-util in that"
+ einfo "case. Specifying the apache2 useflag will also enable the building of"
+ einfo "the apache2 module."
+ fi
+}
+
+src_unpack() {
+ cd ${WORKDIR}
+ unpack ${P/_rc/-rc}.tar.bz2 || die "unpacking failed for some strange reason"
+ cd ${S}
+
+ epatch ${FILESDIR}/subversion-db4.patch
+ epatch ${FILESDIR}/subversion-1.1.0-build.patch
+
+ export WANT_AUTOCONF=2.5
+ elibtoolize
+ autoconf
+ (cd apr; autoconf)
+ (cd apr-util; autoconf)
+ sed -i -e 's,\(subversion/svnversion/svnversion.*\)\(>.*svn-revision.txt\),echo "exported" \2,' Makefile.in
+}
+
+src_compile() {
+ local myconf
+
+ cd ${S}
+ use ssl && myconf="${myconf} --with-ssl"
+ use ssl || myconf="${myconf} --without-ssl"
+
+ use apache2 && myconf="${myconf} --with-apxs=/usr/sbin/apxs2 \
+ --with-apr=/usr --with-apr-util=/usr"
+ use apache2 || myconf="${myconf} --without-apxs"
+
+ use berkdb && myconf="${myconf} --with-berkeley-db"
+ use berkdb || myconf="${myconf} --without-berkeley-db"
+
+ use python && myconf="${myconf} --with-python=/usr/bin/python"
+ use python || myconf="${myconf} --without-python"
+
+ if use java; then
+ myconf="${myconf} --enable-javahl"
+ use jikes && myconf="${myconf} --with-jikes=yes"
+ use jikes || myconf="${myconf} --without-jikes"
+ else
+ myconf="${myconf} --disable-javahl"
+ fi
+
+ if use python || use perl; then
+ myconf="${myconf} --with-swig"
+ else
+ myconf="${myconf} --without-swig"
+ fi
+
+ econf ${myconf} \
+ --with-neon=/usr \
+ --disable-experimental-libtool \
+ --disable-mod-activation ||die "configuration failed"
+
+
+ # build subversion, but do it in a way that is safe for paralel builds
+ # Also apparently the included apr does have a libtool that doesn't like
+ # -L flags. So not specifying it at all when not building apache modules
+ # and only specify it for internal parts otherwise
+ if use apache2; then
+ ( emake external-all && emake LT_LDFLAGS="-L${D}/usr/lib" local-all ) || die "make of subversion failed"
+ else
+ ( emake external-all && emake local-all ) || die "make of subversion failed"
+ fi
+
+ if use python; then
+ #building fails without the apache apr-util as includes are wrong.
+ if use apache2; then
+ emake swig-py || die "subversion python bindings failed"
+ else
+ emake SVN_APR_INCLUDES="-I${S}/apr/include -I${S}/apr-util/include" swig-py || die "subversion python bindings failed"
+ fi
+ fi
+ if use perl; then
+ make swig-pl || die "Perl library building failed"
+ fi
+ if use java; then
+ # ensure that the destination dir exists, else some compilation fails
+ mkdir -p ${S}/subversion/bindings/java/javahl/classes
+ #Compile javahl
+ make JAVACFLAGS="-source 1.3 -encoding iso8859-1" javahl || die "Compilation failed"
+ fi
+
+ cd ${S}
+ if use emacs; then
+ einfo "compiling emacs support"
+ elisp-compile ${S}/contrib/client-side/psvn/psvn.el || die "emacs modules failed"
+ elisp-compile ${S}/contrib/client-side/vc-svn.el || die "emacs modules failed"
+ fi
+}
+
+
+src_install () {
+ use apache2 && mkdir -p ${D}/etc/apache2/conf
+
+ python_version
+ PYTHON_DIR=/usr/lib/python${PYVER}
+
+ make DESTDIR=${D} install || die "Installation of subversion failed"
+ if [ -e ${D}/usr/lib/apache2 ]; then
+ if has_version '>=net-www/apache-2.0.48-r2'; then
+ mv ${D}/usr/lib/apache2/modules ${D}/usr/lib/apache2-extramodules
+ rmdir ${D}/usr/lib/apache2
+ else
+ mv ${D}/usr/lib/apache2 ${D}/usr/lib/apache2-extramodules
+ fi
+ fi
+
+ dobin svn-config
+ if use python; then
+ make install-swig-py DESTDIR=${D} DISTUTIL_PARAM=--prefix=${D} LD_LIBRARY_PATH="-L${D}/usr/lib" || die "Installation of subversion python bindings failed"
+
+ # move python bindings
+ mkdir -p ${D}${PYTHON_DIR}/site-packages
+ mv ${D}/usr/lib/svn-python/svn ${D}${PYTHON_DIR}/site-packages
+ mv ${D}/usr/lib/svn-python/libsvn ${D}${PYTHON_DIR}/site-packages
+ rmdir ${D}/usr/lib/svn-python
+ fi
+ if use perl; then
+ make DESTDIR=${D} install-swig-pl || die "Perl library building failed"
+ fi
+ if use java; then
+ make DESTDIR="${D}" install-javahl || die "installation failed"
+ fi
+
+ dodoc BUGS COMMITTERS COPYING HACKING INSTALL README
+ dodoc CHANGES
+ dodoc tools/xslt/svnindex.css tools/xslt/svnindex.xsl
+ cp -r tools/hook-scripts ${D}/usr/share/doc/${PF}/
+
+ # install documentation
+ docinto notes
+ for f in notes/*
+ do
+ [ -f ${f} ] && dodoc ${f}
+ done
+
+ # Install the book in it's own dir
+ docinto book
+ cd ${S}
+ echo "installing html book"
+ dohtml -r doc/book/book/svn-book.html doc/book/book/styles.css doc/book/book/images || die "Installing book failed"
+
+ # install emacs lisps
+ if use emacs; then
+ insinto /usr/share/emacs/site-lisp/subversion
+ doins contrib/client-side/psvn/psvn.el*
+ doins contrib/client-side/vc-svn.el*
+
+ elisp-site-file-install ${FILESDIR}/70svn-gentoo.el
+ fi
+
+
+
+ #Install apache module config
+ if useq apache2; then
+ mkdir -p ${D}/etc/apache2/conf/modules.d
+ cat <<EOF >${D}/etc/apache2/conf/modules.d/47_mod_dav_svn.conf
+<IfDefine SVN>
+ <IfModule !mod_dav_svn.c>
+ LoadModule dav_svn_module extramodules/mod_dav_svn.so
+ </IfModule>
+ <Location /svn/repos>
+ DAV svn
+ SVNPath ${SVN_REPOS_LOC}/repos
+ AuthType Basic
+ AuthName "Subversion repository"
+ AuthUserFile ${SVN_REPOS_LOC}/conf/svnusers
+ Require valid-user
+ </Location>
+ <IfDefine SVN_AUTHZ>
+ <IfModule !authz_svn_module.c>
+ LoadModule authz_svn_module extramodules/mod_authz_svn.so
+ </IfModule>
+ </IfDefine>
+</IfDefine>
+EOF
+ fi
+}
+
+pkg_postinst() {
+
+ use emacs && elisp-site-regen
+ if use apache2; then
+ einfo "Subversion has multiple server types. To enable the http based version"
+ einfo "you must edit /etc/conf.d/apache2 to include both \"-D DAV\" and \"-D SVN\""
+ einfo ""
+ fi
+ einfo "A repository needs to be created using the \"ebuild <path to ${PVR}.ebuild> config\" command"
+ einfo "or using svnadmin (see man svnadmin) if this subversion install is used as server"
+ einfo ""
+ einfo "If you upgraded from an older version of berkely db and experience"
+ einfo "problems with your repository then run the following command:"
+ einfo " su apache -c \"db4_recover -h /path/to/repos\""
+
+ if use apache2; then
+ einfo ""
+ einfo "To allow web access a htpasswd file needs to be created using the"
+ einfo "following command:"
+ einfo " htpasswd2 -m -c ${SVN_REPOS_LOC}/conf/svnusers USERNAME"
+ fi
+}
+
+pkg_postrm() {
+ has_version virtual/emacs && elisp-site-regen
+}
+
+pkg_config() {
+ if [ ! -x /usr/bin/svnadmin ]; then
+ die "You seem to only have build the subversion client"
+ fi
+ einfo ">>> Initializing the database in ${SVN_REPOS_LOC}..."
+ if [ -f ${SVN_REPOS_LOC}/repos ] ; then
+ echo "A subversion repository already exists and I will not overwrite it."
+ echo "Delete ${SVN_REPOS_LOC}/repos first if you're sure you want to have a clean version."
+ else
+ mkdir -p ${SVN_REPOS_LOC}/conf
+ einfo ">>> Populating repository directory ..."
+ # create initial repository
+ /usr/bin/svnadmin create ${SVN_REPOS_LOC}/repos
+
+ einfo ">>> Setting repository permissions ..."
+ chown -Rf apache:apache ${SVN_REPOS_LOC}/repos
+ chmod -Rf 755 ${SVN_REPOS_LOC}/repos
+ fi
+}
projects / gentoo.git / commitdiff