--- /dev/null
+Important: The openrc libvirtd init script is now broken up into two
+separate services: libvirtd, that solely handles the daemon, and
+libvirt-guests, that takes care of clients during shutdown/restart of the
+host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
+and enable the service and start it:
+
+ $ rc-update add libvirt-guests
+ $ service libvirt-guests start
+
+
+For the basic networking support (bridged and routed networks) you don't
+need any extra software. For more complex network modes including but not
+limited to NATed network, you can enable the 'virt-network' USE flag. It
+will pull in required runtime dependencies
+
+
+If you are using dnsmasq on your system, you will have to configure
+/etc/dnsmasq.conf to enable the following settings:
+
+ bind-interfaces
+ interface or except-interface
+
+Otherwise you might have issues with your existing DNS server.
+
+
+For openrc users:
+
+ Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
+ libvirtd.
+
+ Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
+ the host. The default configuration will suspend and resume running kvm
+ guests with 'managedsave'. This behavior can be changed under
+ /etc/conf.d/libvirt-guests
+
+
+For systemd users:
+
+ Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
+ to control the '--listen' parameter for libvirtd.
+
+ The configuration for the 'libvirt-guests.service' is found under
+ /etc/libvirt/libvirt-guests.conf"
+
+
+If you have built libvirt without policykit support (USE=-policykit), you
+must change the unix sock group and/or perms in /etc/libvirt/libvirtd.conf
+in order to allow normal users to connect to libvirtd.
+
+
+If libvirtd is built with USE=caps, libvirt will now start qemu/kvm VMs
+with non-root privileges. Ensure any resources your VMs use are accessible
+by qemu:qemu.
EAPI=5
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
BACKPORTS=""
else
# Versions with 4 numbers are stable updates:
if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
- SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
else
- SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
fi
SRC_URI+=" ${BACKPORTS:+
https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
KEYWORDS="~amd64 ~x86"
SLOT="0/${PV}"
fi
-S="${WORKDIR}/${P%_rc*}"
DESCRIPTION="C toolkit to manipulate virtual machines"
HOMEPAGE="http://www.libvirt.org/"
LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
- selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
- elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+ selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+ xen elibc_glibc"
+
+REQUIRED_USE="
+ firewalld? ( virt-network )
+ libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
lxc? ( caps libvirtd )
openvz? ( libvirtd )
qemu? ( libvirtd )
uml? ( libvirtd )
vepa? ( macvtap )
- virtualbox? ( libvirtd )
- xen? ( libvirtd )
virt-network? ( libvirtd )
- firewalld? ( virt-network )"
+ virtualbox? ( libvirtd )
+ xen? ( libvirtd )"
# gettext.sh command is used by the libvirt command wrappers, and it's
# non-optional, so put it into RDEPEND.
# We can use both libnl:1.1 and libnl:3, but if you have both installed, the
# package will use 3 by default. Since we don't have slot pinning in an API,
# we must go with the most recent
-RDEPEND="sys-libs/readline:=
- sys-libs/ncurses:0=
- >=net-misc/curl-7.18.0
+RDEPEND="
+ app-misc/scrub
dev-libs/libgcrypt:0
- >=dev-libs/libxml2-2.7.6
dev-libs/libnl:3
+ >=dev-libs/libxml2-2.7.6
+ >=net-analyzer/netcat6-1.0-r2
>=net-libs/gnutls-1.0.25
net-libs/libssh2
+ >=net-misc/curl-7.18.0
sys-apps/dmidecode
>=sys-apps/util-linux-2.17
sys-devel/gettext
- >=net-analyzer/netcat6-1.0-r2
- app-misc/scrub
+ sys-libs/ncurses:0=
+ sys-libs/readline:=
apparmor? ( sys-libs/libapparmor )
audit? ( sys-process/audit )
avahi? ( >=net-dns/avahi-0.6[dbus] )
fuse? ( >=sys-fs/fuse-2.8.6 )
glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
iscsi? ( sys-block/open-iscsi )
- lxc? ( !systemd? ( sys-power/pm-utils ) )
lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+ lxc? ( !systemd? ( sys-power/pm-utils ) )
nfs? ( net-fs/nfs-utils )
numa? (
>sys-process/numactl-2.0.2
sasl? ( dev-libs/cyrus-sasl )
selinux? ( >=sys-libs/libselinux-2.0.85 )
systemd? ( sys-apps/systemd )
- virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
- wireshark-plugins? ( net-analyzer/wireshark:= )
- xen? ( app-emulation/xen-tools app-emulation/xen )
- udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
- virt-network? ( net-dns/dnsmasq[script]
+ virt-network? (
+ net-dns/dnsmasq[script]
net-firewall/ebtables
>=net-firewall/iptables-1.4.10[ipv6]
net-misc/radvd
sys-apps/iproute2[-minimal]
firewalld? ( net-firewall/firewalld )
)
+ virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+ wireshark-plugins? ( net-analyzer/wireshark:= )
+ xen? ( app-emulation/xen-tools app-emulation/xen )
+ udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
DEPEND="${RDEPEND}
- virtual/pkgconfig
app-text/xhtml1
dev-lang/perl
+ dev-libs/libxslt
dev-perl/XML-XPath
- dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
- $ rc-update add libvirt-guests
- $ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
- bind-interfaces
- interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
- Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
- libvirtd.
-
- Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
- the host. The default configuration will suspend and resume running kvm
- guests with 'managedsave'. This behavior can be changed under
- /etc/conf.d/libvirt-guests
-
-For systemd users:
-
- Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
- to control the '--listen' parameter for libvirtd.
-
- The configuration for the 'libvirt-guests.service' is found under
- /etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
- ~CGROUPS
- ~CGROUP_FREEZER
- ~CGROUP_DEVICE
- ~CGROUP_CPUACCT
- ~CGROUP_SCHED
- ~CGROUP_PERF
- ~BLK_CGROUP
- ~NET_CLS_CGROUP
- ~CGROUP_NET_PRIO
- ~CPUSETS
- ~NAMESPACES
- ~UTS_NS
- ~IPC_NS
- ~PID_NS
- ~NET_NS
- ~USER_NS
- ~DEVPTS_MULTIPLE_INSTANCES
- ~VETH
- ~MACVLAN
- ~POSIX_MQUEUE
- ~SECURITYFS
- ~!GRKERNSEC_CHROOT_MOUNT
- ~!GRKERNSEC_CHROOT_DOUBLE
- ~!GRKERNSEC_CHROOT_PIVOT
- ~!GRKERNSEC_CHROOT_CHMOD
- ~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
- ~BRIDGE_NF_EBTABLES
- ~BRIDGE_EBT_MARK_T
- ~NETFILTER_ADVANCED
- ~NETFILTER_XT_TARGET_CHECKSUM
- ~NETFILTER_XT_CONNMARK
- ~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
- ~BRIDGE_EBT_T_NAT
- ~NET_SCH_HTB
- ~NET_SCH_SFQ
- ~NET_SCH_INGRESS
- ~NET_CLS_FW
- ~NET_CLS_U32
- ~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+ virtual/pkgconfig"
pkg_setup() {
enewgroup qemu 77
gpasswd -a qemu kvm
fi
- # Handle specific kernel versions for different features
- kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
- kernel_is ge 3 6 && LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+ # Check kernel configuration:
CONFIG_CHECK=""
- use fuse && CONFIG_CHECK+=" ~FUSE_FS"
- use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
- use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
- use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
- use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+ use fuse && CONFIG_CHECK+="
+ ~FUSE_FS"
+
+ use lvm && CONFIG_CHECK+="
+ ~BLK_DEV_DM
+ ~DM_MULTIPATH
+ ~DM_SNAPSHOT"
+
+ use lxc && CONFIG_CHECK+="
+ ~BLK_CGROUP
+ ~CGROUP_CPUACCT
+ ~CGROUP_DEVICE
+ ~CGROUP_FREEZER
+ ~CGROUP_NET_PRIO
+ ~CGROUP_PERF
+ ~CGROUPS
+ ~CGROUP_SCHED
+ ~CPUSETS
+ ~DEVPTS_MULTIPLE_INSTANCES
+ ~IPC_NS
+ ~MACVLAN
+ ~NAMESPACES
+ ~NET_CLS_CGROUP
+ ~NET_NS
+ ~PID_NS
+ ~POSIX_MQUEUE
+ ~SECURITYFS
+ ~USER_NS
+ ~UTS_NS
+ ~VETH
+ ~!GRKERNSEC_CHROOT_MOUNT
+ ~!GRKERNSEC_CHROOT_DOUBLE
+ ~!GRKERNSEC_CHROOT_PIVOT
+ ~!GRKERNSEC_CHROOT_CHMOD
+ ~!GRKERNSEC_CHROOT_CAPS"
+ # Handle specific kernel versions for different features
+ kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+ kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+ use macvtap && CONFIG_CHECK+="
+ ~MACVTAP"
+
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_MARK_T
+ ~BRIDGE_NF_EBTABLES
+ ~NETFILTER_ADVANCED
+ ~NETFILTER_XT_CONNMARK
+ ~NETFILTER_XT_MARK
+ ~NETFILTER_XT_TARGET_CHECKSUM"
# Bandwidth Limiting Support
- use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_T_NAT
+ ~NET_ACT_POLICE
+ ~NET_CLS_FW
+ ~NET_CLS_U32
+ ~NET_SCH_HTB
+ ~NET_SCH_INGRESS
+ ~NET_SCH_SFQ"
+
+ ERROR_USER_NS="Optional depending on LXC configuration."
+
if [[ -n ${CONFIG_CHECK} ]]; then
linux-info_pkg_setup
fi
"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
- [[ -n ${BACKPORTS} ]] && \
+ [[ -n ${BACKPORTS} ]] &&
EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
EPATCH_SOURCE="${WORKDIR}/patches" epatch
epatch_user
- [[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
- # Tweak the init script
- local avahi_init=
- local iscsi_init=
- local rbd_init=
- local firewalld_init=
- cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
- use avahi && avahi_init='avahi-daemon'
- use iscsi && iscsi_init='iscsid'
- use rbd && rbd_init='ceph'
- use firewalld && firewalld_init='need firewalld'
-
- sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+ # Tweak the init script:
+ cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+ sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+ -e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+ -e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+ -e "s/USE_FLAG_RBD/$(usex rbd ceph '')/" \
+ -i "${S}/libvirtd.init" || die "sed failed"
+
+ AUTOTOOLS_AUTORECONF=true
+ autotools-utils_src_prepare
}
src_configure() {
- local myconf=""
-
- ## enable/disable daemon, otherwise client only utils
- myconf+=" $(use_with libvirtd)"
-
- ## enable/disable the daemon using avahi to find VMs
- myconf+=" $(use_with avahi)"
+ local myeconfargs=(
+ $(use_with apparmor)
+ $(use_with apparmor apparmor-profiles)
+ $(use_with audit)
+ $(use_with avahi)
+ $(use_with caps capng)
+ $(use_with firewalld)
+ $(use_with fuse)
+ $(use_with glusterfs)
+ $(use_with glusterfs storage-gluster)
+ $(use_with iscsi storage-iscsi)
+ $(use_with libvirtd)
+ $(use_with lvm storage-lvm)
+ $(use_with lvm storage-mpath)
+ $(use_with lxc)
+ $(use_with macvtap)
+ $(use_enable nls)
+ $(use_with numa numactl)
+ $(use_with numa numad)
+ $(use_with openvz)
+ $(use_with parted storage-disk)
+ $(use_with pcap libpcap)
+ $(use_with phyp)
+ $(use_with policykit polkit)
+ $(use_with qemu)
+ $(use_with qemu yajl)
+ $(use_with rbd storage-rbd)
+ $(use_with sasl)
+ $(use_with selinux)
+ $(use_with systemd systemd-daemon)
+ $(usex systemd --with-init-script=systemd '')
+ $(use_with udev)
+ $(use_with uml)
+ $(use_with vepa virtualport)
+ $(use_with virt-network network)
+ $(use_with wireshark-plugins wireshark-dissector)
+ $(use_with xen)
+ $(use_with xen xen-inotify)
+ $(usex xen --with-libxl '')
+
+ --without-hal
+ --without-netcf
+ --without-sanlock
+ --without-xenapi
+ --with-esx
+ --with-qemu-group=$(usex caps qemu root)
+ --with-qemu-user=$(usex caps qemu root)
+ --with-remote
+ --with-storage-fs
+ --with-vmware
+
+ --disable-static
+ --disable-werror
+
+ --docdir=/usr/share/doc/${PF}
+ --htmldir=/usr/share/doc/${PF}/html
+ --localstatedir=/var
+ )
- ## hypervisors on the local host
- myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
- myconf+=" --without-xenapi"
- if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
- myconf+=" --with-libxl"
- else
- myconf+=" --without-libxl"
- fi
- myconf+=" $(use_with openvz)"
- myconf+=" $(use_with lxc)"
if use virtualbox && has_version app-emulation/virtualbox-ose; then
- myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
- else
- myconf+=" $(use_with virtualbox vbox)"
- fi
- myconf+=" $(use_with uml)"
- myconf+=" $(use_with qemu)"
- myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
- myconf+=" $(use_with phyp)"
- myconf+=" --with-esx"
- myconf+=" --with-vmware"
-
- ## additional host drivers
- myconf+=" $(use_with apparmor)"
- myconf+=" $(use_with apparmor apparmor-profiles)"
- myconf+=" $(use_with virt-network network)"
- myconf+=" --with-storage-fs"
- myconf+=" $(use_with lvm storage-lvm)"
- myconf+=" $(use_with iscsi storage-iscsi)"
- myconf+=" $(use_with parted storage-disk)"
- myconf+=" $(use_with glusterfs)"
- myconf+=" $(use_with glusterfs storage-gluster)"
- myconf+=" $(use_with lvm storage-mpath)"
- myconf+=" $(use_with rbd storage-rbd)"
- myconf+=" $(use_with numa numactl)"
- myconf+=" $(use_with numa numad)"
- myconf+=" $(use_with selinux)"
- myconf+=" $(use_with fuse)"
-
- # udev for device support details
- myconf+=" $(use_with udev)"
- myconf+=" --without-hal"
-
- # linux capability support so we don't need privileged accounts
- myconf+=" $(use_with caps capng)"
-
- ## auth stuff
- myconf+=" $(use_with policykit polkit)"
- myconf+=" $(use_with sasl)"
-
- # network bits
- myconf+=" $(use_with macvtap)"
- myconf+=" $(use_with pcap libpcap)"
- myconf+=" $(use_with vepa virtualport)"
- myconf+=" $(use_with firewalld)"
-
- ## other
- myconf+=" $(use_enable nls)"
-
- # user privilege bits fir qemu/kvm
- if use caps; then
- myconf+=" --with-qemu-user=qemu"
- myconf+=" --with-qemu-group=qemu"
+ myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
else
- myconf+=" --with-qemu-user=root"
- myconf+=" --with-qemu-group=root"
+ myeconfargs+=( $(use_with virtualbox vbox) )
fi
- # audit support
- myconf+=" $(use_with audit)"
-
- # wireshark dissector
- myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
- ## stuff we don't yet support
- myconf+=" --without-netcf"
-
- # locking support
- myconf+=" --without-sanlock"
-
- # systemd unit files
- myconf+=" $(use_with systemd systemd-daemon)"
- use systemd && myconf+=" --with-init-script=systemd"
-
- # this is a nasty trick to work around the problem in bug
- # #275073. The reason why we don't solve this properly is that
- # it'll require us to rebuild autotools (and we don't really want
- # to do that right now). The proper solution has been sent
- # upstream and should hopefully land in 0.7.7, in the mean time,
- # mime the same functionality with this.
- case ${CHOST} in
- *cygwin* | *mingw* )
- ;;
- *)
- ac_cv_prog_WINDRES=no
- ;;
- esac
-
- econf \
- ${myconf} \
- --disable-static \
- --disable-werror \
- --with-remote \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var
+ autotools-utils_src_configure
if [[ ${PV} = *9999* ]]; then
# Restore gnulib's config.sub and config.guess
}
src_install() {
- emake install \
+ autotools-utils_src_compile install \
DESTDIR="${D}" \
- HTML_DIR=/usr/share/doc/${PF}/html \
- DOCS_DIR=/usr/share/doc/${PF} \
- EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
- SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
- || die "emake install failed"
+ SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
find "${D}" -name '*.la' -delete || die
newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_create_doc
}
if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
fi
-
- # We really don't want to use or support old PolicyKit cause it
- # screws with the new polkit integration
- if has_version sys-auth/policykit; then
- rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
- fi
-
- # Only sysctl files ending in .conf work
- dodir /etc/sysctl.d
- mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
}
pkg_postinst() {
FORCE_PRINT_ELOG=true
fi
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_print_elog
}
EAPI=5
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
BACKPORTS=""
else
# Versions with 4 numbers are stable updates:
if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
- SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
else
- SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
fi
SRC_URI+=" ${BACKPORTS:+
https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
KEYWORDS="~amd64 ~x86"
SLOT="0/${PV}"
fi
-S="${WORKDIR}/${P%_rc*}"
DESCRIPTION="C toolkit to manipulate virtual machines"
HOMEPAGE="http://www.libvirt.org/"
LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
- selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
- elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+ selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+ xen elibc_glibc"
+
+REQUIRED_USE="
+ firewalld? ( virt-network )
+ libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
lxc? ( caps libvirtd )
openvz? ( libvirtd )
qemu? ( libvirtd )
uml? ( libvirtd )
vepa? ( macvtap )
- virtualbox? ( libvirtd )
- xen? ( libvirtd )
virt-network? ( libvirtd )
- firewalld? ( virt-network )"
+ virtualbox? ( libvirtd )
+ xen? ( libvirtd )"
# gettext.sh command is used by the libvirt command wrappers, and it's
# non-optional, so put it into RDEPEND.
# We can use both libnl:1.1 and libnl:3, but if you have both installed, the
# package will use 3 by default. Since we don't have slot pinning in an API,
# we must go with the most recent
-RDEPEND="sys-libs/readline:=
- sys-libs/ncurses:0=
- >=net-misc/curl-7.18.0
+RDEPEND="
+ app-misc/scrub
dev-libs/libgcrypt:0
- >=dev-libs/libxml2-2.7.6
dev-libs/libnl:3
+ >=dev-libs/libxml2-2.7.6
+ >=net-analyzer/netcat6-1.0-r2
>=net-libs/gnutls-1.0.25
net-libs/libssh2
+ >=net-misc/curl-7.18.0
sys-apps/dmidecode
>=sys-apps/util-linux-2.17
sys-devel/gettext
- >=net-analyzer/netcat6-1.0-r2
- app-misc/scrub
+ sys-libs/ncurses:0=
+ sys-libs/readline:=
apparmor? ( sys-libs/libapparmor )
audit? ( sys-process/audit )
avahi? ( >=net-dns/avahi-0.6[dbus] )
fuse? ( >=sys-fs/fuse-2.8.6 )
glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
iscsi? ( sys-block/open-iscsi )
- lxc? ( !systemd? ( sys-power/pm-utils ) )
lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+ lxc? ( !systemd? ( sys-power/pm-utils ) )
nfs? ( net-fs/nfs-utils )
numa? (
>sys-process/numactl-2.0.2
sasl? ( dev-libs/cyrus-sasl )
selinux? ( >=sys-libs/libselinux-2.0.85 )
systemd? ( sys-apps/systemd )
- virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
- wireshark-plugins? ( net-analyzer/wireshark:= )
- xen? ( app-emulation/xen-tools app-emulation/xen )
- udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
- virt-network? ( net-dns/dnsmasq[script]
+ virt-network? (
+ net-dns/dnsmasq[script]
net-firewall/ebtables
>=net-firewall/iptables-1.4.10[ipv6]
net-misc/radvd
sys-apps/iproute2[-minimal]
firewalld? ( net-firewall/firewalld )
)
+ virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+ wireshark-plugins? ( net-analyzer/wireshark:= )
+ xen? ( app-emulation/xen-tools app-emulation/xen )
+ udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
DEPEND="${RDEPEND}
- virtual/pkgconfig
app-text/xhtml1
dev-lang/perl
+ dev-libs/libxslt
dev-perl/XML-XPath
- dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
- $ rc-update add libvirt-guests
- $ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
- bind-interfaces
- interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
- Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
- libvirtd.
-
- Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
- the host. The default configuration will suspend and resume running kvm
- guests with 'managedsave'. This behavior can be changed under
- /etc/conf.d/libvirt-guests
-
-For systemd users:
-
- Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
- to control the '--listen' parameter for libvirtd.
-
- The configuration for the 'libvirt-guests.service' is found under
- /etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
- ~CGROUPS
- ~CGROUP_FREEZER
- ~CGROUP_DEVICE
- ~CGROUP_CPUACCT
- ~CGROUP_SCHED
- ~CGROUP_PERF
- ~BLK_CGROUP
- ~NET_CLS_CGROUP
- ~CGROUP_NET_PRIO
- ~CPUSETS
- ~NAMESPACES
- ~UTS_NS
- ~IPC_NS
- ~PID_NS
- ~NET_NS
- ~USER_NS
- ~DEVPTS_MULTIPLE_INSTANCES
- ~VETH
- ~MACVLAN
- ~POSIX_MQUEUE
- ~SECURITYFS
- ~!GRKERNSEC_CHROOT_MOUNT
- ~!GRKERNSEC_CHROOT_DOUBLE
- ~!GRKERNSEC_CHROOT_PIVOT
- ~!GRKERNSEC_CHROOT_CHMOD
- ~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
- ~BRIDGE_NF_EBTABLES
- ~BRIDGE_EBT_MARK_T
- ~NETFILTER_ADVANCED
- ~NETFILTER_XT_TARGET_CHECKSUM
- ~NETFILTER_XT_CONNMARK
- ~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
- ~BRIDGE_EBT_T_NAT
- ~NET_SCH_HTB
- ~NET_SCH_SFQ
- ~NET_SCH_INGRESS
- ~NET_CLS_FW
- ~NET_CLS_U32
- ~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+ virtual/pkgconfig"
pkg_setup() {
enewgroup qemu 77
gpasswd -a qemu kvm
fi
- # Handle specific kernel versions for different features
- kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
- kernel_is ge 3 6 && LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+ # Check kernel configuration:
CONFIG_CHECK=""
- use fuse && CONFIG_CHECK+=" ~FUSE_FS"
- use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
- use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
- use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
- use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+ use fuse && CONFIG_CHECK+="
+ ~FUSE_FS"
+
+ use lvm && CONFIG_CHECK+="
+ ~BLK_DEV_DM
+ ~DM_MULTIPATH
+ ~DM_SNAPSHOT"
+
+ use lxc && CONFIG_CHECK+="
+ ~BLK_CGROUP
+ ~CGROUP_CPUACCT
+ ~CGROUP_DEVICE
+ ~CGROUP_FREEZER
+ ~CGROUP_NET_PRIO
+ ~CGROUP_PERF
+ ~CGROUPS
+ ~CGROUP_SCHED
+ ~CPUSETS
+ ~DEVPTS_MULTIPLE_INSTANCES
+ ~IPC_NS
+ ~MACVLAN
+ ~NAMESPACES
+ ~NET_CLS_CGROUP
+ ~NET_NS
+ ~PID_NS
+ ~POSIX_MQUEUE
+ ~SECURITYFS
+ ~USER_NS
+ ~UTS_NS
+ ~VETH
+ ~!GRKERNSEC_CHROOT_MOUNT
+ ~!GRKERNSEC_CHROOT_DOUBLE
+ ~!GRKERNSEC_CHROOT_PIVOT
+ ~!GRKERNSEC_CHROOT_CHMOD
+ ~!GRKERNSEC_CHROOT_CAPS"
+ # Handle specific kernel versions for different features
+ kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+ kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+ use macvtap && CONFIG_CHECK+="
+ ~MACVTAP"
+
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_MARK_T
+ ~BRIDGE_NF_EBTABLES
+ ~NETFILTER_ADVANCED
+ ~NETFILTER_XT_CONNMARK
+ ~NETFILTER_XT_MARK
+ ~NETFILTER_XT_TARGET_CHECKSUM"
# Bandwidth Limiting Support
- use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_T_NAT
+ ~NET_ACT_POLICE
+ ~NET_CLS_FW
+ ~NET_CLS_U32
+ ~NET_SCH_HTB
+ ~NET_SCH_INGRESS
+ ~NET_SCH_SFQ"
+
+ ERROR_USER_NS="Optional depending on LXC configuration."
+
if [[ -n ${CONFIG_CHECK} ]]; then
linux-info_pkg_setup
fi
"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
- [[ -n ${BACKPORTS} ]] && \
+ [[ -n ${BACKPORTS} ]] &&
EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
EPATCH_SOURCE="${WORKDIR}/patches" epatch
epatch_user
- [[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
- # Tweak the init script
- local avahi_init=
- local iscsi_init=
- local rbd_init=
- local firewalld_init=
- cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
- use avahi && avahi_init='avahi-daemon'
- use iscsi && iscsi_init='iscsid'
- use rbd && rbd_init='ceph'
- use firewalld && firewalld_init='need firewalld'
-
- sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+ # Tweak the init script:
+ cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+ sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+ -e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+ -e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+ -e "s/USE_FLAG_RBD/$(usex rbd ceph '')/" \
+ -i "${S}/libvirtd.init" || die "sed failed"
+
+ AUTOTOOLS_AUTORECONF=true
+ autotools-utils_src_prepare
}
src_configure() {
- local myconf=""
-
- ## enable/disable daemon, otherwise client only utils
- myconf+=" $(use_with libvirtd)"
-
- ## enable/disable the daemon using avahi to find VMs
- myconf+=" $(use_with avahi)"
+ local myeconfargs=(
+ $(use_with apparmor)
+ $(use_with apparmor apparmor-profiles)
+ $(use_with audit)
+ $(use_with avahi)
+ $(use_with caps capng)
+ $(use_with firewalld)
+ $(use_with fuse)
+ $(use_with glusterfs)
+ $(use_with glusterfs storage-gluster)
+ $(use_with iscsi storage-iscsi)
+ $(use_with libvirtd)
+ $(use_with lvm storage-lvm)
+ $(use_with lvm storage-mpath)
+ $(use_with lxc)
+ $(use_with macvtap)
+ $(use_enable nls)
+ $(use_with numa numactl)
+ $(use_with numa numad)
+ $(use_with openvz)
+ $(use_with parted storage-disk)
+ $(use_with pcap libpcap)
+ $(use_with phyp)
+ $(use_with policykit polkit)
+ $(use_with qemu)
+ $(use_with qemu yajl)
+ $(use_with rbd storage-rbd)
+ $(use_with sasl)
+ $(use_with selinux)
+ $(use_with systemd systemd-daemon)
+ $(usex systemd --with-init-script=systemd '')
+ $(use_with udev)
+ $(use_with uml)
+ $(use_with vepa virtualport)
+ $(use_with virt-network network)
+ $(use_with wireshark-plugins wireshark-dissector)
+ $(use_with xen)
+ $(use_with xen xen-inotify)
+ $(usex xen --with-libxl '')
+
+ --without-hal
+ --without-netcf
+ --without-sanlock
+ --without-xenapi
+ --with-esx
+ --with-qemu-group=$(usex caps qemu root)
+ --with-qemu-user=$(usex caps qemu root)
+ --with-remote
+ --with-storage-fs
+ --with-vmware
+
+ --disable-static
+ --disable-werror
+
+ --docdir=/usr/share/doc/${PF}
+ --htmldir=/usr/share/doc/${PF}/html
+ --localstatedir=/var
+ )
- ## hypervisors on the local host
- myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
- myconf+=" --without-xenapi"
- if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
- myconf+=" --with-libxl"
- else
- myconf+=" --without-libxl"
- fi
- myconf+=" $(use_with openvz)"
- myconf+=" $(use_with lxc)"
if use virtualbox && has_version app-emulation/virtualbox-ose; then
- myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
- else
- myconf+=" $(use_with virtualbox vbox)"
- fi
- myconf+=" $(use_with uml)"
- myconf+=" $(use_with qemu)"
- myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
- myconf+=" $(use_with phyp)"
- myconf+=" --with-esx"
- myconf+=" --with-vmware"
-
- ## additional host drivers
- myconf+=" $(use_with apparmor)"
- myconf+=" $(use_with apparmor apparmor-profiles)"
- myconf+=" $(use_with virt-network network)"
- myconf+=" --with-storage-fs"
- myconf+=" $(use_with lvm storage-lvm)"
- myconf+=" $(use_with iscsi storage-iscsi)"
- myconf+=" $(use_with parted storage-disk)"
- myconf+=" $(use_with glusterfs)"
- myconf+=" $(use_with glusterfs storage-gluster)"
- myconf+=" $(use_with lvm storage-mpath)"
- myconf+=" $(use_with rbd storage-rbd)"
- myconf+=" $(use_with numa numactl)"
- myconf+=" $(use_with numa numad)"
- myconf+=" $(use_with selinux)"
- myconf+=" $(use_with fuse)"
-
- # udev for device support details
- myconf+=" $(use_with udev)"
- myconf+=" --without-hal"
-
- # linux capability support so we don't need privileged accounts
- myconf+=" $(use_with caps capng)"
-
- ## auth stuff
- myconf+=" $(use_with policykit polkit)"
- myconf+=" $(use_with sasl)"
-
- # network bits
- myconf+=" $(use_with macvtap)"
- myconf+=" $(use_with pcap libpcap)"
- myconf+=" $(use_with vepa virtualport)"
- myconf+=" $(use_with firewalld)"
-
- ## other
- myconf+=" $(use_enable nls)"
-
- # user privilege bits fir qemu/kvm
- if use caps; then
- myconf+=" --with-qemu-user=qemu"
- myconf+=" --with-qemu-group=qemu"
+ myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
else
- myconf+=" --with-qemu-user=root"
- myconf+=" --with-qemu-group=root"
+ myeconfargs+=( $(use_with virtualbox vbox) )
fi
- # audit support
- myconf+=" $(use_with audit)"
-
- # wireshark dissector
- myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
- ## stuff we don't yet support
- myconf+=" --without-netcf"
-
- # locking support
- myconf+=" --without-sanlock"
-
- # systemd unit files
- myconf+=" $(use_with systemd systemd-daemon)"
- use systemd && myconf+=" --with-init-script=systemd"
-
- # this is a nasty trick to work around the problem in bug
- # #275073. The reason why we don't solve this properly is that
- # it'll require us to rebuild autotools (and we don't really want
- # to do that right now). The proper solution has been sent
- # upstream and should hopefully land in 0.7.7, in the mean time,
- # mime the same functionality with this.
- case ${CHOST} in
- *cygwin* | *mingw* )
- ;;
- *)
- ac_cv_prog_WINDRES=no
- ;;
- esac
-
- econf \
- ${myconf} \
- --disable-static \
- --disable-werror \
- --with-remote \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var
+ autotools-utils_src_configure
if [[ ${PV} = *9999* ]]; then
# Restore gnulib's config.sub and config.guess
}
src_install() {
- emake install \
+ autotools-utils_src_compile install \
DESTDIR="${D}" \
- HTML_DIR=/usr/share/doc/${PF}/html \
- DOCS_DIR=/usr/share/doc/${PF} \
- EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
- SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
- || die "emake install failed"
+ SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
find "${D}" -name '*.la' -delete || die
newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_create_doc
}
if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
fi
-
- # We really don't want to use or support old PolicyKit cause it
- # screws with the new polkit integration
- if has_version sys-auth/policykit; then
- rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
- fi
-
- # Only sysctl files ending in .conf work
- dodir /etc/sysctl.d
- mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
}
pkg_postinst() {
FORCE_PRINT_ELOG=true
fi
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_print_elog
}
EAPI=5
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
BACKPORTS=""
else
# Versions with 4 numbers are stable updates:
if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
- SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
else
- SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+ SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
fi
SRC_URI+=" ${BACKPORTS:+
https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
KEYWORDS="~amd64 ~x86"
SLOT="0/${PV}"
fi
-S="${WORKDIR}/${P%_rc*}"
DESCRIPTION="C toolkit to manipulate virtual machines"
HOMEPAGE="http://www.libvirt.org/"
LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
- selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
- elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+ selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+ xen elibc_glibc"
+
+REQUIRED_USE="
+ firewalld? ( virt-network )
+ libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
lxc? ( caps libvirtd )
openvz? ( libvirtd )
qemu? ( libvirtd )
uml? ( libvirtd )
vepa? ( macvtap )
- virtualbox? ( libvirtd )
- xen? ( libvirtd )
virt-network? ( libvirtd )
- firewalld? ( virt-network )"
+ virtualbox? ( libvirtd )
+ xen? ( libvirtd )"
# gettext.sh command is used by the libvirt command wrappers, and it's
# non-optional, so put it into RDEPEND.
# We can use both libnl:1.1 and libnl:3, but if you have both installed, the
# package will use 3 by default. Since we don't have slot pinning in an API,
# we must go with the most recent
-RDEPEND="sys-libs/readline:=
- sys-libs/ncurses:0=
- >=net-misc/curl-7.18.0
+RDEPEND="
+ app-misc/scrub
dev-libs/libgcrypt:0
- >=dev-libs/libxml2-2.7.6
dev-libs/libnl:3
+ >=dev-libs/libxml2-2.7.6
+ >=net-analyzer/netcat6-1.0-r2
>=net-libs/gnutls-1.0.25
net-libs/libssh2
+ >=net-misc/curl-7.18.0
sys-apps/dmidecode
>=sys-apps/util-linux-2.17
sys-devel/gettext
- >=net-analyzer/netcat6-1.0-r2
- app-misc/scrub
+ sys-libs/ncurses:0=
+ sys-libs/readline:=
apparmor? ( sys-libs/libapparmor )
audit? ( sys-process/audit )
avahi? ( >=net-dns/avahi-0.6[dbus] )
fuse? ( >=sys-fs/fuse-2.8.6 )
glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
iscsi? ( sys-block/open-iscsi )
- lxc? ( !systemd? ( sys-power/pm-utils ) )
lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+ lxc? ( !systemd? ( sys-power/pm-utils ) )
nfs? ( net-fs/nfs-utils )
numa? (
>sys-process/numactl-2.0.2
sasl? ( dev-libs/cyrus-sasl )
selinux? ( >=sys-libs/libselinux-2.0.85 )
systemd? ( sys-apps/systemd )
- virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
- wireshark-plugins? ( net-analyzer/wireshark:= )
- xen? ( app-emulation/xen-tools app-emulation/xen )
- udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
- virt-network? ( net-dns/dnsmasq[script]
+ virt-network? (
+ net-dns/dnsmasq[script]
net-firewall/ebtables
>=net-firewall/iptables-1.4.10[ipv6]
net-misc/radvd
sys-apps/iproute2[-minimal]
firewalld? ( net-firewall/firewalld )
)
+ virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+ wireshark-plugins? ( net-analyzer/wireshark:= )
+ xen? ( app-emulation/xen-tools app-emulation/xen )
+ udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
DEPEND="${RDEPEND}
- virtual/pkgconfig
app-text/xhtml1
dev-lang/perl
+ dev-libs/libxslt
dev-perl/XML-XPath
- dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
- $ rc-update add libvirt-guests
- $ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
- bind-interfaces
- interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
- Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
- libvirtd.
-
- Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
- the host. The default configuration will suspend and resume running kvm
- guests with 'managedsave'. This behavior can be changed under
- /etc/conf.d/libvirt-guests
-
-For systemd users:
-
- Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
- to control the '--listen' parameter for libvirtd.
-
- The configuration for the 'libvirt-guests.service' is found under
- /etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
- ~CGROUPS
- ~CGROUP_FREEZER
- ~CGROUP_DEVICE
- ~CGROUP_CPUACCT
- ~CGROUP_SCHED
- ~CGROUP_PERF
- ~BLK_CGROUP
- ~NET_CLS_CGROUP
- ~CGROUP_NET_PRIO
- ~CPUSETS
- ~NAMESPACES
- ~UTS_NS
- ~IPC_NS
- ~PID_NS
- ~NET_NS
- ~USER_NS
- ~DEVPTS_MULTIPLE_INSTANCES
- ~VETH
- ~MACVLAN
- ~POSIX_MQUEUE
- ~SECURITYFS
- ~!GRKERNSEC_CHROOT_MOUNT
- ~!GRKERNSEC_CHROOT_DOUBLE
- ~!GRKERNSEC_CHROOT_PIVOT
- ~!GRKERNSEC_CHROOT_CHMOD
- ~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
- ~BRIDGE_NF_EBTABLES
- ~BRIDGE_EBT_MARK_T
- ~NETFILTER_ADVANCED
- ~NETFILTER_XT_TARGET_CHECKSUM
- ~NETFILTER_XT_CONNMARK
- ~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
- ~BRIDGE_EBT_T_NAT
- ~NET_SCH_HTB
- ~NET_SCH_SFQ
- ~NET_SCH_INGRESS
- ~NET_CLS_FW
- ~NET_CLS_U32
- ~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+ virtual/pkgconfig"
pkg_setup() {
enewgroup qemu 77
gpasswd -a qemu kvm
fi
- # Handle specific kernel versions for different features
- kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
- kernel_is ge 3 6 && LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+ # Check kernel configuration:
CONFIG_CHECK=""
- use fuse && CONFIG_CHECK+=" ~FUSE_FS"
- use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
- use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
- use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
- use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+ use fuse && CONFIG_CHECK+="
+ ~FUSE_FS"
+
+ use lvm && CONFIG_CHECK+="
+ ~BLK_DEV_DM
+ ~DM_MULTIPATH
+ ~DM_SNAPSHOT"
+
+ use lxc && CONFIG_CHECK+="
+ ~BLK_CGROUP
+ ~CGROUP_CPUACCT
+ ~CGROUP_DEVICE
+ ~CGROUP_FREEZER
+ ~CGROUP_NET_PRIO
+ ~CGROUP_PERF
+ ~CGROUPS
+ ~CGROUP_SCHED
+ ~CPUSETS
+ ~DEVPTS_MULTIPLE_INSTANCES
+ ~IPC_NS
+ ~MACVLAN
+ ~NAMESPACES
+ ~NET_CLS_CGROUP
+ ~NET_NS
+ ~PID_NS
+ ~POSIX_MQUEUE
+ ~SECURITYFS
+ ~USER_NS
+ ~UTS_NS
+ ~VETH
+ ~!GRKERNSEC_CHROOT_MOUNT
+ ~!GRKERNSEC_CHROOT_DOUBLE
+ ~!GRKERNSEC_CHROOT_PIVOT
+ ~!GRKERNSEC_CHROOT_CHMOD
+ ~!GRKERNSEC_CHROOT_CAPS"
+ # Handle specific kernel versions for different features
+ kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+ kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+ use macvtap && CONFIG_CHECK+="
+ ~MACVTAP"
+
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_MARK_T
+ ~BRIDGE_NF_EBTABLES
+ ~NETFILTER_ADVANCED
+ ~NETFILTER_XT_CONNMARK
+ ~NETFILTER_XT_MARK
+ ~NETFILTER_XT_TARGET_CHECKSUM"
# Bandwidth Limiting Support
- use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+ use virt-network && CONFIG_CHECK+="
+ ~BRIDGE_EBT_T_NAT
+ ~NET_ACT_POLICE
+ ~NET_CLS_FW
+ ~NET_CLS_U32
+ ~NET_SCH_HTB
+ ~NET_SCH_INGRESS
+ ~NET_SCH_SFQ"
+
+ ERROR_USER_NS="Optional depending on LXC configuration."
+
if [[ -n ${CONFIG_CHECK} ]]; then
linux-info_pkg_setup
fi
"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
- [[ -n ${BACKPORTS} ]] && \
+ [[ -n ${BACKPORTS} ]] &&
EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
EPATCH_SOURCE="${WORKDIR}/patches" epatch
epatch_user
- [[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
- # Tweak the init script
- local avahi_init=
- local iscsi_init=
- local rbd_init=
- local firewalld_init=
- cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
- use avahi && avahi_init='avahi-daemon'
- use iscsi && iscsi_init='iscsid'
- use rbd && rbd_init='ceph'
- use firewalld && firewalld_init='need firewalld'
-
- sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
- sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+ # Tweak the init script:
+ cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+ sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+ -e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+ -e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+ -e "s/USE_FLAG_RBD/$(usex rbd ceph '')/" \
+ -i "${S}/libvirtd.init" || die "sed failed"
+
+ AUTOTOOLS_AUTORECONF=true
+ autotools-utils_src_prepare
}
src_configure() {
- local myconf=""
-
- ## enable/disable daemon, otherwise client only utils
- myconf+=" $(use_with libvirtd)"
-
- ## enable/disable the daemon using avahi to find VMs
- myconf+=" $(use_with avahi)"
+ local myeconfargs=(
+ $(use_with apparmor)
+ $(use_with apparmor apparmor-profiles)
+ $(use_with audit)
+ $(use_with avahi)
+ $(use_with caps capng)
+ $(use_with firewalld)
+ $(use_with fuse)
+ $(use_with glusterfs)
+ $(use_with glusterfs storage-gluster)
+ $(use_with iscsi storage-iscsi)
+ $(use_with libvirtd)
+ $(use_with lvm storage-lvm)
+ $(use_with lvm storage-mpath)
+ $(use_with lxc)
+ $(use_with macvtap)
+ $(use_enable nls)
+ $(use_with numa numactl)
+ $(use_with numa numad)
+ $(use_with openvz)
+ $(use_with parted storage-disk)
+ $(use_with pcap libpcap)
+ $(use_with phyp)
+ $(use_with policykit polkit)
+ $(use_with qemu)
+ $(use_with qemu yajl)
+ $(use_with rbd storage-rbd)
+ $(use_with sasl)
+ $(use_with selinux)
+ $(use_with systemd systemd-daemon)
+ $(usex systemd --with-init-script=systemd '')
+ $(use_with udev)
+ $(use_with uml)
+ $(use_with vepa virtualport)
+ $(use_with virt-network network)
+ $(use_with wireshark-plugins wireshark-dissector)
+ $(use_with xen)
+ $(use_with xen xen-inotify)
+ $(usex xen --with-libxl '')
+
+ --without-hal
+ --without-netcf
+ --without-sanlock
+ --without-xenapi
+ --with-esx
+ --with-qemu-group=$(usex caps qemu root)
+ --with-qemu-user=$(usex caps qemu root)
+ --with-remote
+ --with-storage-fs
+ --with-vmware
+
+ --disable-static
+ --disable-werror
+
+ --docdir=/usr/share/doc/${PF}
+ --htmldir=/usr/share/doc/${PF}/html
+ --localstatedir=/var
+ )
- ## hypervisors on the local host
- myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
- myconf+=" --without-xenapi"
- if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
- myconf+=" --with-libxl"
- else
- myconf+=" --without-libxl"
- fi
- myconf+=" $(use_with openvz)"
- myconf+=" $(use_with lxc)"
if use virtualbox && has_version app-emulation/virtualbox-ose; then
- myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
- else
- myconf+=" $(use_with virtualbox vbox)"
- fi
- myconf+=" $(use_with uml)"
- myconf+=" $(use_with qemu)"
- myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
- myconf+=" $(use_with phyp)"
- myconf+=" --with-esx"
- myconf+=" --with-vmware"
-
- ## additional host drivers
- myconf+=" $(use_with apparmor)"
- myconf+=" $(use_with apparmor apparmor-profiles)"
- myconf+=" $(use_with virt-network network)"
- myconf+=" --with-storage-fs"
- myconf+=" $(use_with lvm storage-lvm)"
- myconf+=" $(use_with iscsi storage-iscsi)"
- myconf+=" $(use_with parted storage-disk)"
- myconf+=" $(use_with glusterfs)"
- myconf+=" $(use_with glusterfs storage-gluster)"
- myconf+=" $(use_with lvm storage-mpath)"
- myconf+=" $(use_with rbd storage-rbd)"
- myconf+=" $(use_with numa numactl)"
- myconf+=" $(use_with numa numad)"
- myconf+=" $(use_with selinux)"
- myconf+=" $(use_with fuse)"
-
- # udev for device support details
- myconf+=" $(use_with udev)"
- myconf+=" --without-hal"
-
- # linux capability support so we don't need privileged accounts
- myconf+=" $(use_with caps capng)"
-
- ## auth stuff
- myconf+=" $(use_with policykit polkit)"
- myconf+=" $(use_with sasl)"
-
- # network bits
- myconf+=" $(use_with macvtap)"
- myconf+=" $(use_with pcap libpcap)"
- myconf+=" $(use_with vepa virtualport)"
- myconf+=" $(use_with firewalld)"
-
- ## other
- myconf+=" $(use_enable nls)"
-
- # user privilege bits fir qemu/kvm
- if use caps; then
- myconf+=" --with-qemu-user=qemu"
- myconf+=" --with-qemu-group=qemu"
+ myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
else
- myconf+=" --with-qemu-user=root"
- myconf+=" --with-qemu-group=root"
+ myeconfargs+=( $(use_with virtualbox vbox) )
fi
- # audit support
- myconf+=" $(use_with audit)"
-
- # wireshark dissector
- myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
- ## stuff we don't yet support
- myconf+=" --without-netcf"
-
- # locking support
- myconf+=" --without-sanlock"
-
- # systemd unit files
- myconf+=" $(use_with systemd systemd-daemon)"
- use systemd && myconf+=" --with-init-script=systemd"
-
- # this is a nasty trick to work around the problem in bug
- # #275073. The reason why we don't solve this properly is that
- # it'll require us to rebuild autotools (and we don't really want
- # to do that right now). The proper solution has been sent
- # upstream and should hopefully land in 0.7.7, in the mean time,
- # mime the same functionality with this.
- case ${CHOST} in
- *cygwin* | *mingw* )
- ;;
- *)
- ac_cv_prog_WINDRES=no
- ;;
- esac
-
- econf \
- ${myconf} \
- --disable-static \
- --disable-werror \
- --with-remote \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var
+ autotools-utils_src_configure
if [[ ${PV} = *9999* ]]; then
# Restore gnulib's config.sub and config.guess
}
src_install() {
- emake install \
+ autotools-utils_src_compile install \
DESTDIR="${D}" \
- HTML_DIR=/usr/share/doc/${PF}/html \
- DOCS_DIR=/usr/share/doc/${PF} \
- EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
- SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
- || die "emake install failed"
+ SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
find "${D}" -name '*.la' -delete || die
newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_create_doc
}
if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
fi
-
- # We really don't want to use or support old PolicyKit cause it
- # screws with the new polkit integration
- if has_version sys-auth/policykit; then
- rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
- fi
-
- # Only sysctl files ending in .conf work
- dodir /etc/sysctl.d
- mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
}
pkg_postinst() {
FORCE_PRINT_ELOG=true
fi
+ DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+ DISABLE_AUTOFORMATTING=true
readme.gentoo_print_elog
}
projects / gentoo.git / commitdiff