------BEGIN PGP SIGNED MESSAGE-----
-Hash: SHA1
-
AUX 05-udev-early.rules-078 288 RMD160 e4d07ee5080618ba60c9cfb544d438f2eb11cab6 SHA1 fbdeedb8b7a638c9d930f1e405aa83e55d9d2eec SHA256 63602afdbefafa4eb0b3301685e47dec5cc206b66765e733f9bcc6afe2a5d31b
MD5 17c291f5c6e624792d02dd304fb8177e files/05-udev-early.rules-078 288
RMD160 e4d07ee5080618ba60c9cfb544d438f2eb11cab6 files/05-udev-early.rules-078 288
MD5 c5e955ffa18f2f4526a67c00dbe8b870 files/05-udev-early.rules-079 385
RMD160 04de1f937d47a2d42eeec879851a1a00d847cecc files/05-udev-early.rules-079 385
SHA256 c50db994a4a40d6b7aa466944c2ab14a00a6269a2b9f0ae26b1049cf6881b682 files/05-udev-early.rules-079 385
+AUX net.sh 558 RMD160 3f846c5228d95cc0eaa36a075a3a8e2b90b24581 SHA1 6935e04a5472b4e024d85e4508ae9fe8365f3dde SHA256 4972e449b2958789c3dd87ae5975c340cfafb1bc216a42989a127401881d5eba
+MD5 84525266497f8100474ccffc8722cc99 files/net.sh 558
+RMD160 3f846c5228d95cc0eaa36a075a3a8e2b90b24581 files/net.sh 558
+SHA256 4972e449b2958789c3dd87ae5975c340cfafb1bc216a42989a127401881d5eba files/net.sh 558
AUX seq_node.sh 1628 RMD160 2851f756afdcf1a7ee8c9e7652e129ce6a71d828 SHA1 b991fe67410841471a978429b18b1c660cf366f9 SHA256 e79b4f5dc92714d6051912188cce0cc827bb0cd7a662f13cbdef2218bba65cee
MD5 7532c45b87b0ee7d13627088d95845e3 files/seq_node.sh 1628
RMD160 2851f756afdcf1a7ee8c9e7652e129ce6a71d828 files/seq_node.sh 1628
MD5 8972fd2b6c6827b4f01aa0d45d7a23a8 files/udev.rules-103-r1 9651
RMD160 7f61de480f7ded49e4266c008e738a17dc1ebc01 files/udev.rules-103-r1 9651
SHA256 a667f8041e74485344a427e3271a6f4ec53d98ef4bde35f4cacfd5003dd86e48 files/udev.rules-103-r1 9651
+AUX udev.rules-103-r2 9845 RMD160 a2247a7e55da61319d464f3b069658b82198adea SHA1 521f589ace886bd38d844671ae65f8744ca3fc90 SHA256 489567f1c663143ba728c4861562d0d1e8f99adb11c849de3c871869eaceb4b4
+MD5 647b8eeaf08f7df0711a2b3e0114cdc4 files/udev.rules-103-r2 9845
+RMD160 a2247a7e55da61319d464f3b069658b82198adea files/udev.rules-103-r2 9845
+SHA256 489567f1c663143ba728c4861562d0d1e8f99adb11c849de3c871869eaceb4b4 files/udev.rules-103-r2 9845
AUX udev.rules.post_012 4184 RMD160 0fa81b4bafa732497b8e65cf658adf2cf32f3a0a SHA1 12300249d33f01c4fd1a8708a4733dafddb90ffe SHA256 3fc8785c40acb43d92a2f7b3c4e21cfa7b947fb5d2e87d1c109297ff34994100
MD5 7f23fbfcba51c7c4b8c29a8c08429996 files/udev.rules.post_012 4184
RMD160 0fa81b4bafa732497b8e65cf658adf2cf32f3a0a files/udev.rules.post_012 4184
MD5 65da6ef189a378dbe1f177994916066a udev-103-r1.ebuild 11302
RMD160 96d40708c5931838dc008bdf130d78ac4edce2cb udev-103-r1.ebuild 11302
SHA256 46db6069d24868ca07a02204dab50f6f7dd1288d7c4f08f539d5f992b7da01af udev-103-r1.ebuild 11302
+EBUILD udev-103-r2.ebuild 11384 RMD160 2f14be8c39e7c9e0eacdc338f8ba84bbc938bead SHA1 777b57f203c05704e2eb3b9039cca7a82cd8b852 SHA256 27745555cf9967fb80403c377b66745cbc71efd2507a3070065d56179347cf8f
+MD5 faa012ba3bdb82ccc43499b0538a246c udev-103-r2.ebuild 11384
+RMD160 2f14be8c39e7c9e0eacdc338f8ba84bbc938bead udev-103-r2.ebuild 11384
+SHA256 27745555cf9967fb80403c377b66745cbc71efd2507a3070065d56179347cf8f udev-103-r2.ebuild 11384
EBUILD udev-103.ebuild 11291 RMD160 f8e2e2bd08027bc6309c78b881374a8830aff0cf SHA1 df742c23113cdd25eb328bdad303b41cd8efb8e3 SHA256 625f7999f38f2d3be789d8b60554230329cd8e220a03bb74f103eef70672755c
MD5 8bf170e2466c9f7a171bb54a900763ab udev-103.ebuild 11291
RMD160 f8e2e2bd08027bc6309c78b881374a8830aff0cf udev-103.ebuild 11291
SHA256 625f7999f38f2d3be789d8b60554230329cd8e220a03bb74f103eef70672755c udev-103.ebuild 11291
-MISC ChangeLog 39835 RMD160 9ed776a8f803b95368726e29d76e6c537c7763a2 SHA1 b0de58bf5505fb03bc3cf3604b3202527c729e93 SHA256 6a13d9fbcb4f3f993d8d3fff20da2e561f5c64ca804ca01083561490de08916e
-MD5 a9f06643eaa6bd6a7ebc38ee3fd9389c ChangeLog 39835
-RMD160 9ed776a8f803b95368726e29d76e6c537c7763a2 ChangeLog 39835
-SHA256 6a13d9fbcb4f3f993d8d3fff20da2e561f5c64ca804ca01083561490de08916e ChangeLog 39835
+MISC ChangeLog 40043 RMD160 954a9a4e59e049b8488ab1308fc3e80c3c3dd125 SHA1 6b1fedcf991bf91ca6434a928b36ae2b2b0ecb7f SHA256 015aa290717d8585598290ae26a88d3bec87261a1f38e524cfdcc506c569c8f1
+MD5 cafae8e86d5ed8e6751e2563e619bf70 ChangeLog 40043
+RMD160 954a9a4e59e049b8488ab1308fc3e80c3c3dd125 ChangeLog 40043
+SHA256 015aa290717d8585598290ae26a88d3bec87261a1f38e524cfdcc506c569c8f1 ChangeLog 40043
MISC metadata.xml 447 RMD160 d1ba09bd6a434b25c718673de9258cc544e090be SHA1 70c43d2863c09958849bfce8c5bb97d406a0662b SHA256 a9881de1424ac71191111bd30c7c1253589673b0cdce13c352204f1499e9d884
MD5 f74bee0505505c00e76da6313db29e49 metadata.xml 447
RMD160 d1ba09bd6a434b25c718673de9258cc544e090be metadata.xml 447
MD5 0a038fef39f2c8ccb4a613719e0f817b files/digest-udev-103-r1 229
RMD160 fd217b32f070097ae37ba5ee5a96a84faab5edef files/digest-udev-103-r1 229
SHA256 7638db47ed884246551e3d27d9be0fd088c0db9a7e92c3359efa901a87742a28 files/digest-udev-103-r1 229
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v2.0.1 (GNU/Linux)
-
-iD8DBQFFq6PLt2vP6XvVdOcRAhwQAJ918cCOEDpVwqyP0njitO2UTtIAHwCg3OKZ
-+Y4vmVaI8hd7H4jZj0UPJyY=
-=EYXP
------END PGP SIGNATURE-----
+MD5 0a038fef39f2c8ccb4a613719e0f817b files/digest-udev-103-r2 229
+RMD160 fd217b32f070097ae37ba5ee5a96a84faab5edef files/digest-udev-103-r2 229
+SHA256 7638db47ed884246551e3d27d9be0fd088c0db9a7e92c3359efa901a87742a28 files/digest-udev-103-r2 229
--- /dev/null
+# /etc/udev/rules/50-udev.rules: device naming rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields. See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcs*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcsa*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty", NAME="%k", GROUP="tty", MODE="0666", OPTIONS="last_rule"
+KERNEL=="tty[0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="console", NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx", NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*", NAME="%k", SYMLINK="tts/%n", GROUP="tty"
+KERNEL=="ttyUSB[0-9]*", NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660"
+KERNEL=="ippp0", NAME="%k", GROUP="tty"
+KERNEL=="isdn*" NAME="%k", GROUP="tty"
+KERNEL=="dcbri*", NAME="%k", GROUP="tty"
+KERNEL=="ircomm*", NAME="%k", GROUP="tty"
+
+# all block devices
+SUBSYSTEM=="block", GROUP="disk"
+
+# cdrom symlinks and other good cdrom naming
+KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", IMPORT{program}="cdrom_id --export $tempnode"
+
+ENV{ID_CDROM}=="?*", GROUP="cdrom"
+BUS=="scsi", KERNEL=="sg[0-9]*", ACTION=="add", DRIVERS=="sr", GROUP="cdrom"
+
+# disk devices
+KERNEL=="sd*", NAME="%k", GROUP="disk"
+KERNEL=="dasd*", NAME="%k", GROUP="disk"
+KERNEL=="ataraid*", NAME="%k", GROUP="disk"
+
+# compaq smart array
+KERNEL=="cciss*", NAME="%k"
+KERNEL=="ida*", NAME="%k"
+
+# mylex
+KERNEL=="rd*", NAME="%k"
+
+# dri devices
+KERNEL=="card*", NAME="dri/card%n", GROUP="video"
+KERNEL=="nvidia*", NAME="%k", GROUP="video"
+KERNEL=="3dfx*", NAME="%k", GROUP="video"
+
+# alsa devices
+SUBSYSTEM=="sound", GROUP="audio"
+KERNEL=="controlC[0-9]*", NAME="snd/%k"
+KERNEL=="hw[CD0-9]*", NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
+KERNEL=="midiC[D0-9]*", NAME="snd/%k"
+KERNEL=="timer", NAME="snd/%k"
+KERNEL=="seq", NAME="snd/%k"
+
+# capi devices
+KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout"
+KERNEL=="capi*", NAME="capi/%n", GROUP="dialout"
+
+# cpu devices
+KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
+KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
+KERNEL=="microcode", NAME="cpu/microcode"
+
+# dm devices (ignore them)
+KERNEL=="dm-[0-9]*", OPTIONS="ignore_device"
+# create a symlink named after the device map name
+# note devmap_name comes with extras/multipath
+#KERNEL=="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
+KERNEL=="device-mapper", NAME="mapper/control"
+
+# fb devices
+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# floppy devices
+KERNEL=="fd[0-9]*", NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice", NAME="input/%k", MODE="0644"
+KERNEL=="mouse*", NAME="input/%k", MODE="0644"
+KERNEL=="event*", NAME="input/%k", MODE="0600"
+KERNEL=="js*", NAME="input/%k", MODE="664"
+KERNEL=="ts*", NAME="input/%k", MODE="0600"
+
+# loop devices
+KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
+
+# md block devices
+KERNEL=="md[0-9]*", NAME="md/%n", SYMLINK+="%k", GROUP="disk"
+
+# aoe char devices,
+SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# misc devices
+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="psaux", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="rtc", NAME="misc/%k", SYMLINK+="%k", MODE="0664"
+KERNEL=="uinput", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="inotify", NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# netlink devices
+KERNEL=="route", NAME="netlink/%k"
+KERNEL=="skip", NAME="netlink/%k"
+KERNEL=="usersock", NAME="netlink/%k"
+KERNEL=="fwmonitor", NAME="netlink/%k"
+KERNEL=="tcpdiag", NAME="netlink/%k"
+KERNEL=="nflog", NAME="netlink/%k"
+KERNEL=="xfrm", NAME="netlink/%k"
+KERNEL=="arpd", NAME="netlink/%k"
+KERNEL=="route6", NAME="netlink/%k"
+KERNEL=="ip6_fw", NAME="netlink/%k"
+KERNEL=="dnrtmsg", NAME="netlink/%k"
+KERNEL=="tap*", NAME="netlink/%k"
+
+# network devices
+KERNEL=="tun", NAME="net/%k", MODE="0600"
+
+# ramdisk devices
+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
+
+# IEEE1394 (firewire) devices (must be before raw devices below)
+KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
+KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
+
+# raw devices
+KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
+KERNEL=="ram*", NAME="%k", GROUP="disk"
+
+# sound devices
+KERNEL=="adsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="adsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+
+# memory devices
+KERNEL=="random", NAME="%k", MODE="0666"
+KERNEL=="urandom", NAME="%k", MODE="0444"
+KERNEL=="mem", NAME="%k", MODE="0640"
+KERNEL=="kmem", NAME="%k", MODE="0640"
+KERNEL=="port", NAME="%k", MODE="0640"
+KERNEL=="full", NAME="%k", MODE="0666"
+KERNEL=="null", NAME="%k", MODE="0666"
+KERNEL=="zero", NAME="%k", MODE="0666"
+
+# usb devices
+KERNEL=="hiddev*", NAME="usb/%k"
+KERNEL=="auer*", NAME="usb/%k"
+KERNEL=="legousbtower*", NAME="usb/%k", GROUP="usb"
+KERNEL=="dabusb*", NAME="usb/%k"
+BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k", GROUP="lp"
+
+# v4l devices
+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
+KERNEL=="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="video"
+
+# dvb devices
+SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+
+# Asterisk Zaptel devices
+KERNEL=="zapctl", NAME="zap/ctl"
+KERNEL=="zaptimer", NAME="zap/timer"
+KERNEL=="zapchannel", NAME="zap/channel"
+KERNEL=="zappseudo", NAME="zap/pseudo"
+KERNEL=="zap[0-9]*", NAME="zap/%n"
+
+# pilot/palm devices
+KERNEL=="pilot", NAME="%k", GROUP="uucp"
+
+# jaz devices
+KERNEL=="jaz*", NAME="%k", GROUP="disk"
+
+# zip devices
+KERNEL=="pocketzip*", NAME="%k", GROUP="disk"
+KERNEL=="zip*", NAME="%k", GROUP="disk"
+
+# ls120 devices
+KERNEL=="ls120", NAME="%k", GROUP="disk"
+
+# lp devices
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="irlpt", NAME="%k", GROUP="lp"
+KERNEL=="usblp", NAME="%k", GROUP="lp"
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="parport*", NAME="%k", GROUP="lp"
+
+# tape devices
+KERNEL=="ht*", NAME="%k", GROUP="tape"
+KERNEL=="nht*", NAME="%k", GROUP="tape"
+KERNEL=="pt*", NAME="%k", GROUP="tape"
+KERNEL=="npt*", NAME="%k", GROUP="tape"
+KERNEL=="st*", NAME="%k", GROUP="tape"
+KERNEL=="nst*", NAME="%k", GROUP="tape"
+KERNEL=="osst*", NAME="%k", GROUP="tape"
+KERNEL=="nosst*", NAME="%k", GROUP="tape"
+
+# diskonkey devices
+KERNEL=="diskonkey*", NAME="%k", GROUP="disk"
+
+# rem_ide devices
+KERNEL=="microdrive*", NAME="%k", GROUP="disk"
+
+# kbd devices
+KERNEL=="kbd", NAME="%k", MODE="0664"
+
+# Sony Vaio Jogdial sonypi device
+KERNEL=="sonypi", NAME="%k", MODE="0666"
+
+# packet devices
+KERNEL=="pktcdvd", NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
+KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
+
+# infiniband devices
+KERNEL=="umad*", NAME="infiniband/%k"
+KERNEL=="issm*", NAME="infiniband/%k"
+
+
+# usbfs-like device nodes
+SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0644"
+
+
+# Module autoloading
+
+# Autoload modules that lack aliases but have them defined inutoload modules
+SYSFS{modalias}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"
+# If you have problems with some pnp modules being loaded, please enter the
+# following aliases into the modprobe configuration files. These are needed by
+# udev to autoload some modules
+# alias pnp:dPNP0510 irtty-sir
+# alias pnp:dPNP0511 irtty-sir
+# alias pnp:dPNP0700 floppy
+# alias pnp:dPNP0800 pcspkr
+# alias pnp:dPNP0b00 rtc
+# alias pnp:dPNP0303 atkbd
+# alias pnp:dPNP0f13 psmouse
+# alias pnp:dPNPb02f analog
+
+
+# Load firmware
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
+
+
+# Activate our network if we can
+SUBSYSTEM=="net", ACTION=="add", RUN+="net.sh %k start", OPTIONS="last_rule"
+SUBSYSTEM=="net", ACTION=="remove", RUN+="net.sh %k stop", OPTIONS="last_rule"
+
+
+# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
+# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
+#ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
+
+# always run /etc/dev.d/ stuff for now.
+RUN+="udev_run_devd $env{SUBSYSTEM}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
--- /dev/null
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-103-r2.ebuild,v 1.1 2007/01/16 13:08:19 uberlord Exp $
+
+inherit eutils flag-o-matic multilib
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="selinux"
+
+# still rely on hotplug (need to fix that), but now we implement coldplug
+
+DEPEND="sys-apps/hotplug-base"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+ >=sys-apps/baselayout-1.11.14"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+ unpack ${A}
+
+ cd "${S}"
+
+ # patches go here...
+ #epatch ${FILESDIR}/${P}-udev_volume_id.patch
+
+ # No need to clutter the logs ...
+ sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+ # Do not use optimization flags from the package
+ sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+ # Make sure there is no sudden changes to udev.rules.gentoo
+ # (more for my own needs than anything else ...)
+ MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+ MD5=${MD5/ -/}
+ if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
+ then
+ echo
+ eerror "gentoo/udev.rules has been updated, please validate!"
+ die "gentoo/udev.rules has been updated, please validate!"
+ fi
+}
+
+src_compile() {
+ filter-flags -fprefetch-loop-arrays
+ local myconf=
+ local extras="extras/ata_id \
+ extras/cdrom_id \
+ extras/dasd_id \
+ extras/edd_id \
+ extras/firmware \
+ extras/floppy \
+ extras/path_id \
+ extras/run_directory \
+ extras/scsi_id \
+ extras/usb_id \
+ extras/volume_id \
+ extras/rule_generator"
+
+ use selinux && myconf="${myconf} USE_SELINUX=true"
+
+ # Not everyone has full $CHOST-{ld,ar,etc...} yet
+ local mycross=""
+ type -p ${CHOST}-ar && mycross=${CHOST}-
+
+ echo "get_libdir = $(get_libdir)"
+ # Do not work with emake
+ make \
+ EXTRAS="${extras}" \
+ udevdir="/dev/" \
+ CROSS_COMPILE=${mycross} \
+ ${myconf} || die
+}
+
+src_install() {
+ # we install everything by "hand" and don't rely on the udev Makefile to do
+ # it for us (why? it's easier that way...)
+ dobin udevinfo || die "Required binary not installed properly"
+ dobin udevtest || die "Required binary not installed properly"
+ dobin udevmonitor || die "Required binary not installed properly"
+ into /
+ dosbin udevd || die "Required binary not installed properly"
+ dosbin udevstart || die "Required binary not installed properly"
+ dosbin udevtrigger || die "Required binary not installed properly"
+ dosbin udevcontrol || die "Required binary not installed properly"
+ dosbin udevsettle || die "Required binary not installed properly"
+
+ # need to keep this until /sbin/rc stops checking for its presence, it's
+ # really not needed for us to work properly at all.
+ dosbin udev || die "Required binary not installed properly"
+
+ # Helpers
+ exeinto /lib/udev
+ doexe extras/run_directory/udev_run_devd || die "Required helper not installed properly"
+ doexe extras/run_directory/udev_run_hotplugd || die "Required helper not installed properly"
+ doexe extras/ata_id/ata_id || die "Required helper not installed properly"
+ doexe extras/volume_id/vol_id || die "Required helper not installed properly"
+ doexe extras/scsi_id/scsi_id || die "Required helper not installed properly"
+ doexe extras/usb_id/usb_id || die "Required helper not installed properly"
+ doexe extras/path_id/path_id || die "Required helper not installed properly"
+ doexe extras/cdrom_id/cdrom_id || die "Required helper not installed properly"
+ doexe extras/dasd_id/dasd_id || die "Required helper not installed properly"
+ doexe extras/edd_id/edd_id || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_cd_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_net_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/rule_generator.functions || die "Required helper not installed properly"
+ keepdir /lib/udev/state
+
+ # vol_id library (needed by mount and HAL)
+ dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+ # move the .a files to /usr/lib
+ dodir /usr/$(get_libdir)
+ mv -f "${D}"/$(get_libdir)/*.a "${D}"/usr/$(get_libdir)/
+
+ # handle static linking bug #4411
+ gen_usr_ldscript libvolume_id.so
+
+ # save pkgconfig info
+ insinto /usr/$(get_libdir)/pkgconfig
+ doins extras/volume_id/lib/*.pc
+
+ #exeinto /etc/udev/scripts
+ exeinto /lib/udev
+ #doexe extras/ide-devfs.sh
+ #doexe extras/scsi-devfs.sh
+ #doexe extras/raid-devfs.sh
+ doexe extras/floppy/create_floppy_devices || die "Required binary not installed properly"
+ doexe extras/firmware/firmware.sh || die "Required binary not installed properly"
+ doexe ${FILESDIR}/net.sh || die "Required binary not installed properly"
+ doexe ${FILESDIR}/seq_node.sh || die "Required binary not installed properly"
+
+ # Our udev config file
+ insinto /etc/udev
+ newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+ # Our rules files
+ insinto /etc/udev/rules.d/
+ newins etc/udev/gentoo/udev.rules 50-udev.rules
+ newins ${FILESDIR}/udev.rules-103-r2 50-udev.rules
+ newins ${FILESDIR}/05-udev-early.rules-079 05-udev-early.rules
+ # Use upstream's persistent rules for devices
+ doins etc/udev/rules.d/60-*.rules
+ doins extras/rule_generator/75-*.rules || die "rules not installed properly"
+
+ # scsi_id configuration
+ insinto /etc
+ doins extras/scsi_id/scsi_id.config
+
+ # set up the /etc/dev.d directory tree
+ dodir /etc/dev.d/default
+ dodir /etc/dev.d/net
+ exeinto /etc/dev.d/net
+ doexe extras/run_directory/dev.d/net/hotplug.dev
+
+ # all of the man pages
+ doman *.7
+ doman *.8
+ doman extras/ata_id/ata_id.8
+ doman extras/edd_id/edd_id.8
+ doman extras/scsi_id/scsi_id.8
+ doman extras/volume_id/vol_id.8
+ doman extras/dasd_id/dasd_id.8
+ doman extras/cdrom_id/cdrom_id.8
+ # create a extra symlink for udevcontrol
+ ln -s "${D}"/usr/share/man/man8/udevd.8.gz \
+ "${D}"/usr/share/man/man8/udevcontrol.8.gz
+
+ # our udev hooks into the rc system
+ insinto /lib/rcscripts/addons
+ newins "${FILESDIR}"/udev-start-099.sh udev-start.sh
+ doins "${FILESDIR}"/udev-stop.sh
+
+ # needed to compile latest Hal
+ insinto /usr/include
+ doins extras/volume_id/lib/libvolume_id.h
+
+ dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+ dodoc docs/{overview,udev_vs_devfs}
+ dodoc docs/writing_udev_rules/*
+
+ newdoc extras/volume_id/README README_volume_id
+
+}
+
+pkg_preinst() {
+ if [[ -d ${ROOT}/lib/udev-state ]] ; then
+ mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+ rm -r "${ROOT}"/lib/udev-state
+ fi
+
+ if [ -f "${ROOT}/etc/udev/udev.config" -a \
+ ! -f "${ROOT}/etc/udev/udev.rules" ]
+ then
+ mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+ fi
+
+ # delete the old udev.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
+ fi
+
+ # is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+ coldplug_stale=""
+ if [ -f "${ROOT}/etc/init.d/coldplug" ]
+ then
+ coldplug_stale="1"
+ fi
+
+ # Create some nodes that we know we need.
+ # set the time/date so we can see in /dev which ones we copied over
+ # in the udev-start.sh script
+ mkdir -p ${ROOT}/lib/udev/devices
+
+ if [ ! -e ${ROOT}/lib/udev/devices/null ] ; then
+ mknod ${ROOT}/lib/udev/devices/null c 1 3
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/null
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/null
+
+ if [ ! -e ${ROOT}/lib/udev/devices/zero ] ; then
+ mknod ${ROOT}/lib/udev/devices/zero c 1 5
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/zero
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/zero
+
+ if [ ! -e ${ROOT}/lib/udev/devices/console ] ; then
+ mknod ${ROOT}/lib/udev/devices/console c 5 1
+ fi
+ chmod 600 ${ROOT}/lib/udev/devices/console
+ chown root:tty ${ROOT}/lib/udev/devices/console
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/console
+
+ if [ ! -e ${ROOT}/lib/udev/devices/urandom ] ; then
+ mknod ${ROOT}/lib/udev/devices/urandom c 1 9
+ fi
+ chmod 666 ${ROOT}/lib/udev/devices/urandom
+ touch -t 200010220101 ${ROOT}/lib/udev/devices/urandom
+}
+
+pkg_postinst() {
+ if [ "${ROOT}" = "/" -a -n "`pidof udevd`" ]
+ then
+ killall -15 udevd &>/dev/null
+ sleep 1
+ killall -9 udevd &>/dev/null
+ fi
+ /sbin/udevd --daemon
+
+ # people want reminders, I'll give them reminders. Odds are they will
+ # just ignore them anyway...
+ if has_version '<sys-fs/udev-046' ; then
+ ewarn "Note: If you rely on the output of udevinfo for anything, please"
+ ewarn " either run 'udevstart' now, or reboot, in order to get a"
+ ewarn " up-to-date udev database."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-050' ; then
+ ewarn "Note: If you had written some custom permissions rules, please"
+ ewarn " realize that the permission rules are now part of the main"
+ ewarn " udev rules files and are not stand-alone anymore. This means"
+ ewarn " you need to rewrite them."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-059' ; then
+ ewarn "Note: If you are upgrading from a version of udev prior to 059"
+ ewarn " and you have written custom rules, and rely on the etc/dev.d/"
+ ewarn " functionality, or the etc/hotplug.d functionality, or just"
+ ewarn " want to write some very cool and power udev rules, please "
+ ewarn " read the RELEASE-NOTES file for details on what has changed"
+ ewarn " with this feature, and how to change your rules to work properly."
+ ewarn
+ elif has_version '<sys-fs/udev-057' ; then
+ ewarn "Note: If you have written custom rules, and rely on the etc/dev.d/"
+ ewarn " functionality, please read the RELEASE-NOTES file for details"
+ ewarn " on what has changed with this feature, and how to change your"
+ ewarn " rules to work properly."
+ ewarn
+ fi
+ if has_version '<sys-fs/udev-063' ; then
+ ewarn "Note: If you use the devfs-style names for your block devices"
+ ewarn " or use devfs-style names in /etc/inittab or /etc/securetty or"
+ ewarn " your GRUB or LILO kernel boot command line, you need to"
+ ewarn " change them back to LSB compliant names, as the devfs names are"
+ ewarn " now gone. If you wish to use some persistent names for your"
+ ewarn " block devices, look at the symlinks in /dev/disk/ for the names"
+ ewarn " you can use."
+ ewarn
+ fi
+
+ if [[ ${coldplug_stale} == "1" ]] ; then
+ ewarn "A stale coldplug init script found. You should run:"
+ ewarn
+ ewarn " rc-update del coldplug"
+ ewarn " rm -f /etc/init.d/coldplug"
+ ewarn
+ ewarn "udev now provides its own coldplug functionality."
+ fi
+
+ einfo
+ einfo "For more information on udev on Gentoo, writing udev rules, and"
+ einfo " fixing known issues visit:"
+ einfo " http://www.gentoo.org/doc/en/udev-guide.xml"
+}
projects / gentoo.git / commitdiff