Make gitk work reasonably well on Cygwin.

The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.

The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.

Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
    pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
    Again, this is necessary to get around a layout problem on Cygwin.

Signed-off-by: Mark Levedahl <mdl123@verizon.net>

diff --git a/gitk b/gitk
index 650435e7d2c7a9dffe6ba7baee45db227d752a45..8132812b50cc7d387cf762851387c8dafff7e7b7 100755 (executable)
--- a/gitk
+++ b/gitk
@@ -435,56 +435,59 @@ proc makewindow {} {
     .bar.help configure -font $uifont
     . configure -menu .bar
 
-    if {![info exists geometry(canv1)]} {
-       set geometry(canv1) [expr {45 * $charspc}]
-       set geometry(canv2) [expr {30 * $charspc}]
-       set geometry(canv3) [expr {15 * $charspc}]
-       set geometry(canvh) [expr {25 * $linespc + 4}]
-       set geometry(ctextw) 80
-       set geometry(ctexth) 30
-       set geometry(cflistw) 30
-    }
+    # the gui has upper and lower half, parts of a paned window.
     panedwindow .ctop -orient vertical
-    if {[info exists geometry(width)]} {
-       .ctop conf -width $geometry(width) -height $geometry(height)
-       set texth [expr {$geometry(height) - $geometry(canvh) - 56}]
-       set geometry(ctexth) [expr {($texth - 8) /
-                                   [font metrics $textfont -linespace]}]
-    }
-    frame .ctop.top
-    frame .ctop.top.bar
-    frame .ctop.top.lbar
-    pack .ctop.top.lbar -side bottom -fill x
-    pack .ctop.top.bar -side bottom -fill x
-    set cscroll .ctop.top.csb
-    scrollbar $cscroll -command {allcanvs yview} -highlightthickness 0
-    pack $cscroll -side right -fill y
-    panedwindow .ctop.top.clist -orient horizontal -sashpad 0 -handlesize 4
-    pack .ctop.top.clist -side top -fill both -expand 1
-    .ctop add .ctop.top
-    set canv .ctop.top.clist.canv
-    canvas $canv -height $geometry(canvh) -width $geometry(canv1) \
+
+    # possibly use assumed geometry
+    if {![info exists geometry(topheight)]} {
+        set geometry(topheight) [expr {15 * $linespc}]
+        set geometry(topwidth) [expr {80 * $charspc}]
+        set geometry(botheight) [expr {15 * $linespc}]
+        set geometry(botwidth) [expr {50 * $charspc}]
+        set geometry(canv) [expr {40 * $charspc}]
+        set geometry(canv2) [expr {20 * $charspc}]
+        set geometry(canv3) [expr {20 * $charspc}]
+    }
+
+    # the upper half will have a paned window, a scroll bar to the right, and some stuff below
+    frame .tf -height $geometry(topheight) -width $geometry(topwidth)
+    frame .tf.histframe
+    panedwindow .tf.histframe.pwclist -orient horizontal -sashpad 0 -handlesize 4
+
+    # create three canvases
+    set cscroll .tf.histframe.csb
+    set canv .tf.histframe.pwclist.canv
+    canvas $canv -width $geometry(canv) \
        -background $bgcolor -bd 0 \
        -yscrollincr $linespc -yscrollcommand "scrollcanv $cscroll"
-    .ctop.top.clist add $canv
-    set canv2 .ctop.top.clist.canv2
-    canvas $canv2 -height $geometry(canvh) -width $geometry(canv2) \
+    .tf.histframe.pwclist add $canv
+    set canv2 .tf.histframe.pwclist.canv2
+    canvas $canv2 -width $geometry(canv2) \
        -background $bgcolor -bd 0 -yscrollincr $linespc
-    .ctop.top.clist add $canv2
-    set canv3 .ctop.top.clist.canv3
-    canvas $canv3 -height $geometry(canvh) -width $geometry(canv3) \
+    .tf.histframe.pwclist add $canv2
+    set canv3 .tf.histframe.pwclist.canv3
+    canvas $canv3 -width $geometry(canv3) \
        -background $bgcolor -bd 0 -yscrollincr $linespc
-    .ctop.top.clist add $canv3
-    bind .ctop.top.clist <Configure> {resizeclistpanes %W %w}
+    .tf.histframe.pwclist add $canv3
+
+    # a scroll bar to rule them
+    scrollbar $cscroll -command {allcanvs yview} -highlightthickness 0
+    pack $cscroll -side right -fill y
+    bind .tf.histframe.pwclist <Configure> {resizeclistpanes %W %w}
     lappend bglist $canv $canv2 $canv3
+    pack .tf.histframe.pwclist -fill both -expand 1 -side left
 
-    set sha1entry .ctop.top.bar.sha1
+    # we have two button bars at bottom of top frame. Bar 1
+    frame .tf.bar
+    frame .tf.lbar -height 15
+
+    set sha1entry .tf.bar.sha1
     set entries $sha1entry
-    set sha1but .ctop.top.bar.sha1label
+    set sha1but .tf.bar.sha1label
     button $sha1but -text "SHA1 ID: " -state disabled -relief flat \
        -command gotocommit -width 8 -font $uifont
     $sha1but conf -disabledforeground [$sha1but cget -foreground]
-    pack .ctop.top.bar.sha1label -side left
+    pack .tf.bar.sha1label -side left
     entry $sha1entry -width 40 -font $textfont -textvariable sha1string
     trace add variable sha1string write sha1change
     pack $sha1entry -side left -pady 2
@@ -505,91 +508,105 @@ proc makewindow {} {
        0x00, 0x38, 0xff, 0x7f, 0xff, 0x7f, 0xff, 0x7f, 0x00, 0x38, 0x00, 0x1c,
        0x00, 0x0e, 0x00, 0x07, 0x80, 0x03, 0xc0, 0x01};
     }
-    button .ctop.top.bar.leftbut -image bm-left -command goback \
+    button .tf.bar.leftbut -image bm-left -command goback \
        -state disabled -width 26
-    pack .ctop.top.bar.leftbut -side left -fill y
-    button .ctop.top.bar.rightbut -image bm-right -command goforw \
+    pack .tf.bar.leftbut -side left -fill y
+    button .tf.bar.rightbut -image bm-right -command goforw \
        -state disabled -width 26
-    pack .ctop.top.bar.rightbut -side left -fill y
+    pack .tf.bar.rightbut -side left -fill y
 
-    button .ctop.top.bar.findbut -text "Find" -command dofind -font $uifont
-    pack .ctop.top.bar.findbut -side left
+    button .tf.bar.findbut -text "Find" -command dofind -font $uifont
+    pack .tf.bar.findbut -side left
     set findstring {}
-    set fstring .ctop.top.bar.findstring
+    set fstring .tf.bar.findstring
     lappend entries $fstring
     entry $fstring -width 30 -font $textfont -textvariable findstring
     trace add variable findstring write find_change
-    pack $fstring -side left -expand 1 -fill x
+    pack $fstring -side left -expand 1 -fill x -in .tf.bar
     set findtype Exact
-    set findtypemenu [tk_optionMenu .ctop.top.bar.findtype \
-                         findtype Exact IgnCase Regexp]
+    set findtypemenu [tk_optionMenu .tf.bar.findtype \
+                     findtype Exact IgnCase Regexp]
     trace add variable findtype write find_change
-    .ctop.top.bar.findtype configure -font $uifont
-    .ctop.top.bar.findtype.menu configure -font $uifont
+    .tf.bar.findtype configure -font $uifont
+    .tf.bar.findtype.menu configure -font $uifont
     set findloc "All fields"
-    tk_optionMenu .ctop.top.bar.findloc findloc "All fields" Headline \
+    tk_optionMenu .tf.bar.findloc findloc "All fields" Headline \
        Comments Author Committer
     trace add variable findloc write find_change
-    .ctop.top.bar.findloc configure -font $uifont
-    .ctop.top.bar.findloc.menu configure -font $uifont
-    pack .ctop.top.bar.findloc -side right
-    pack .ctop.top.bar.findtype -side right
-
-    label .ctop.top.lbar.flabel -text "Highlight:  Commits " \
-       -font $uifont
-    pack .ctop.top.lbar.flabel -side left -fill y
+    .tf.bar.findloc configure -font $uifont
+    .tf.bar.findloc.menu configure -font $uifont
+    pack .tf.bar.findloc -side right
+    pack .tf.bar.findtype -side right
+
+    # build up the bottom bar of upper window
+    label .tf.lbar.flabel -text "Highlight:  Commits " \
+    -font $uifont
+    pack .tf.lbar.flabel -side left -fill y
     set gdttype "touching paths:"
-    set gm [tk_optionMenu .ctop.top.lbar.gdttype gdttype "touching paths:" \
-               "adding/removing string:"]
+    set gm [tk_optionMenu .tf.lbar.gdttype gdttype "touching paths:" \
+       "adding/removing string:"]
     trace add variable gdttype write hfiles_change
     $gm conf -font $uifont
-    .ctop.top.lbar.gdttype conf -font $uifont
-    pack .ctop.top.lbar.gdttype -side left -fill y
-    entry .ctop.top.lbar.fent -width 25 -font $textfont \
+    .tf.lbar.gdttype conf -font $uifont
+    pack .tf.lbar.gdttype -side left -fill y
+    entry .tf.lbar.fent -width 25 -font $textfont \
        -textvariable highlight_files
     trace add variable highlight_files write hfiles_change
-    lappend entries .ctop.top.lbar.fent
-    pack .ctop.top.lbar.fent -side left -fill x -expand 1
-    label .ctop.top.lbar.vlabel -text " OR in view" -font $uifont
-    pack .ctop.top.lbar.vlabel -side left -fill y
+    lappend entries .tf.lbar.fent
+    pack .tf.lbar.fent -side left -fill x -expand 1
+    label .tf.lbar.vlabel -text " OR in view" -font $uifont
+    pack .tf.lbar.vlabel -side left -fill y
     global viewhlmenu selectedhlview
-    set viewhlmenu [tk_optionMenu .ctop.top.lbar.vhl selectedhlview None]
+    set viewhlmenu [tk_optionMenu .tf.lbar.vhl selectedhlview None]
     $viewhlmenu entryconf None -command delvhighlight
     $viewhlmenu conf -font $uifont
-    .ctop.top.lbar.vhl conf -font $uifont
-    pack .ctop.top.lbar.vhl -side left -fill y
-    label .ctop.top.lbar.rlabel -text " OR " -font $uifont
-    pack .ctop.top.lbar.rlabel -side left -fill y
+    .tf.lbar.vhl conf -font $uifont
+    pack .tf.lbar.vhl -side left -fill y
+    label .tf.lbar.rlabel -text " OR " -font $uifont
+    pack .tf.lbar.rlabel -side left -fill y
     global highlight_related
-    set m [tk_optionMenu .ctop.top.lbar.relm highlight_related None \
-              "Descendent" "Not descendent" "Ancestor" "Not ancestor"]
+    set m [tk_optionMenu .tf.lbar.relm highlight_related None \
+       "Descendent" "Not descendent" "Ancestor" "Not ancestor"]
     $m conf -font $uifont
-    .ctop.top.lbar.relm conf -font $uifont
+    .tf.lbar.relm conf -font $uifont
     trace add variable highlight_related write vrel_change
-    pack .ctop.top.lbar.relm -side left -fill y
-
-    panedwindow .ctop.cdet -orient horizontal
-    .ctop add .ctop.cdet
-    frame .ctop.cdet.left
-    frame .ctop.cdet.left.bot
-    pack .ctop.cdet.left.bot -side bottom -fill x
-    button .ctop.cdet.left.bot.search -text "Search" -command dosearch \
+    pack .tf.lbar.relm -side left -fill y
+
+    # Finish putting the upper half of the viewer together
+    pack .tf.lbar -in .tf -side bottom -fill x
+    pack .tf.bar -in .tf -side bottom -fill x
+    pack .tf.histframe -fill both -side top -expand 1
+    .ctop add .tf
+
+    # now build up the bottom
+    panedwindow .pwbottom -orient horizontal
+
+    # lower left, a text box over search bar, scroll bar to the right
+    # if we know window height, then that will set the lower text height, otherwise
+    # we set lower text height which will drive window height
+    if {[info exists geometry(main)]} {
+        frame .bleft -width $geometry(botwidth)
+    } else {
+        frame .bleft -width $geometry(botwidth) -height $geometry(botheight)
+    }
+    frame .bleft.top
+
+    button .bleft.top.search -text "Search" -command dosearch \
        -font $uifont
-    pack .ctop.cdet.left.bot.search -side left -padx 5
-    set sstring .ctop.cdet.left.bot.sstring
+    pack .bleft.top.search -side left -padx 5
+    set sstring .bleft.top.sstring
     entry $sstring -width 20 -font $textfont -textvariable searchstring
     lappend entries $sstring
     trace add variable searchstring write incrsearch
     pack $sstring -side left -expand 1 -fill x
-    set ctext .ctop.cdet.left.ctext
+    set ctext .bleft.ctext
     text $ctext -background $bgcolor -foreground $fgcolor \
        -state disabled -font $textfont \
-       -width $geometry(ctextw) -height $geometry(ctexth) \
        -yscrollcommand scrolltext -wrap none
-    scrollbar .ctop.cdet.left.sb -command "$ctext yview"
-    pack .ctop.cdet.left.sb -side right -fill y
+    scrollbar .bleft.sb -command "$ctext yview"
+    pack .bleft.top -side top -fill x
+    pack .bleft.sb -side right -fill y
     pack $ctext -side left -fill both -expand 1
-    .ctop.cdet add .ctop.cdet.left
     lappend bglist $ctext
     lappend fglist $ctext
 
@@ -620,36 +637,45 @@ proc makewindow {} {
     $ctext tag conf msep -font [concat $textfont bold]
     $ctext tag conf found -back yellow
 
-    frame .ctop.cdet.right
-    frame .ctop.cdet.right.mode
-    radiobutton .ctop.cdet.right.mode.patch -text "Patch" \
+    .pwbottom add .bleft
+
+    # lower right
+    frame .bright
+    frame .bright.mode
+    radiobutton .bright.mode.patch -text "Patch" \
        -command reselectline -variable cmitmode -value "patch"
-    radiobutton .ctop.cdet.right.mode.tree -text "Tree" \
+    radiobutton .bright.mode.tree -text "Tree" \
        -command reselectline -variable cmitmode -value "tree"
-    grid .ctop.cdet.right.mode.patch .ctop.cdet.right.mode.tree -sticky ew
-    pack .ctop.cdet.right.mode -side top -fill x
-    set cflist .ctop.cdet.right.cfiles
+    grid .bright.mode.patch .bright.mode.tree -sticky ew
+    pack .bright.mode -side top -fill x
+    set cflist .bright.cfiles
     set indent [font measure $mainfont "nn"]
-    text $cflist -width $geometry(cflistw) \
+    text $cflist \
        -background $bgcolor -foreground $fgcolor \
        -font $mainfont \
        -tabs [list $indent [expr {2 * $indent}]] \
-       -yscrollcommand ".ctop.cdet.right.sb set" \
+       -yscrollcommand ".bright.sb set" \
        -cursor [. cget -cursor] \
        -spacing1 1 -spacing3 1
     lappend bglist $cflist
     lappend fglist $cflist
-    scrollbar .ctop.cdet.right.sb -command "$cflist yview"
-    pack .ctop.cdet.right.sb -side right -fill y
+    scrollbar .bright.sb -command "$cflist yview"
+    pack .bright.sb -side right -fill y
     pack $cflist -side left -fill both -expand 1
     $cflist tag configure highlight \
        -background [$cflist cget -selectbackground]
     $cflist tag configure bold -font [concat $mainfont bold]
-    .ctop.cdet add .ctop.cdet.right
-    bind .ctop.cdet <Configure> {resizecdetpanes %W %w}
 
-    pack .ctop -side top -fill both -expand 1
+    .pwbottom add .bright
+    .ctop add .pwbottom
 
+    # restore window position if known
+    if {[info exists geometry(main)]} {
+        wm geometry . "$geometry(main)"
+    }
+
+    bind .pwbottom <Configure> {resizecdetpanes %W %w}
+    pack .ctop -fill both -expand 1
     bindall <1> {selcanvline %W %x %y}
     #bindall <B1-Motion> {selcanvline %W %x %y}
     bindall <ButtonRelease-4> "allcanvs yview scroll -5 units"
@@ -802,18 +828,16 @@ proc savestuff {w} {
        puts $f [list set fgcolor $fgcolor]
        puts $f [list set colors $colors]
        puts $f [list set diffcolors $diffcolors]
-       puts $f "set geometry(width) [winfo width .ctop]"
-       puts $f "set geometry(height) [winfo height .ctop]"
-       puts $f "set geometry(canv1) [expr {[winfo width $canv]-2}]"
-       puts $f "set geometry(canv2) [expr {[winfo width $canv2]-2}]"
-       puts $f "set geometry(canv3) [expr {[winfo width $canv3]-2}]"
-       puts $f "set geometry(canvh) [expr {[winfo height $canv]-2}]"
-       set wid [expr {([winfo width $ctext] - 8) \
-                          / [font measure $textfont "0"]}]
-       puts $f "set geometry(ctextw) $wid"
-       set wid [expr {([winfo width $cflist] - 11) \
-                          / [font measure [$cflist cget -font] "0"]}]
-       puts $f "set geometry(cflistw) $wid"
+
+        puts $f "set geometry(main) [winfo geometry .]"
+       puts $f "set geometry(topwidth) [winfo width .tf]"
+       puts $f "set geometry(topheight) [winfo height .tf]"
+       puts $f "set geometry(canv) [expr {[winfo width $canv]-0}]"
+       puts $f "set geometry(canv2) [expr {[winfo width $canv2]-0}]"
+       puts $f "set geometry(canv3) [expr {[winfo width $canv3]-0}]"
+       puts $f "set geometry(botwidth) [winfo width .bleft]"
+       puts $f "set geometry(botheight) [winfo height .bleft]"
+
        puts -nonewline $f "set permviews {"
        for {set v 0} {$v < $nextviewnum} {incr v} {
            if {$viewperm($v)} {
@@ -4043,11 +4067,11 @@ proc addtohistory {cmd} {
     }
     incr historyindex
     if {$historyindex > 1} {
-       .ctop.top.bar.leftbut conf -state normal
+       .tf.bar.leftbut conf -state normal
     } else {
-       .ctop.top.bar.leftbut conf -state disabled
+       .tf.bar.leftbut conf -state disabled
     }
-    .ctop.top.bar.rightbut conf -state disabled
+    .tf.bar.rightbut conf -state disabled
 }
 
 proc godo {elt} {
@@ -4067,10 +4091,10 @@ proc goback {} {
     if {$historyindex > 1} {
        incr historyindex -1
        godo [lindex $history [expr {$historyindex - 1}]]
-       .ctop.top.bar.rightbut conf -state normal
+       .tf.bar.rightbut conf -state normal
     }
     if {$historyindex <= 1} {
-       .ctop.top.bar.leftbut conf -state disabled
+       .tf.bar.leftbut conf -state disabled
     }
 }
 
@@ -4081,10 +4105,10 @@ proc goforw {} {
        set cmd [lindex $history $historyindex]
        incr historyindex
        godo $cmd
-       .ctop.top.bar.leftbut conf -state normal
+       .tf.bar.leftbut conf -state normal
     }
     if {$historyindex >= [llength $history]} {
-       .ctop.top.bar.rightbut conf -state disabled
+       .tf.bar.rightbut conf -state disabled
     }
 }
 
@@ -4591,7 +4615,7 @@ proc searchmarkvisible {doall} {
 proc scrolltext {f0 f1} {
     global searchstring
 
-    .ctop.cdet.left.sb set $f0 $f1
+    .bleft.sb set $f0 $f1
     if {$searchstring ne {}} {
        searchmarkvisible 0
     }