--- /dev/null
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/snort/snort-2.8.6.ebuild,v 1.1 2010/06/02 12:18:49 patrick Exp $
+
+inherit eutils autotools multilib
+
+DESCRIPTION="The de facto standard for intrusion detection/prevention"
+HOMEPAGE="http://www.snort.org/"
+SRC_URI="http://dl.snort.org/snort-current/${P}.tar.gz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~ppc ~ppc64 ~sparc ~x86"
+IUSE="static dynamicplugin ipv6 gre mpls targetbased decoder-preprocessor-rules
+ppm timestats perfprofiling linux-smp-stats inline inline-init-failopen prelude
+threads debug reload reload-error-restart flexresp flexresp2 react aruba mysql
+odbc postgres selinux zlib"
+
+#flexresp, react, and inline _ONLY_ work with net-libs/libnet-1.0.2a
+DEPEND="virtual/libpcap
+ >=dev-libs/libpcre-6.0
+ flexresp2? ( dev-libs/libdnet )
+ flexresp? ( ~net-libs/libnet-1.0.2a )
+ react? ( ~net-libs/libnet-1.0.2a )
+ postgres? ( virtual/postgresql-base )
+ mysql? ( virtual/mysql )
+ odbc? ( dev-db/unixODBC )
+ prelude? ( >=dev-libs/libprelude-0.9.0 )
+ inline? ( ~net-libs/libnet-1.0.2a net-firewall/iptables )
+ zlib? ( sys-libs/zlib )"
+
+RDEPEND="${DEPEND}
+ dev-lang/perl
+ selinux? ( sec-policy/selinux-snort )"
+
+pkg_setup() {
+
+ if use flexresp && use flexresp2; then
+ eerror
+ eerror "You have both the 'flexresp' and 'flexresp2' USE flags set."
+ eerror "You can use 'flexresp' OR 'flexresp2' but not both."
+ eerror "flexresp2 is recommended."
+ eerror
+ eerror
+ die
+ elif use flexresp && use react; then
+ eerror
+ eerror "You have both the 'react' and 'flexresp' USE flags set."
+ eerror "'react' is enabled automaticly when the 'flexresp'"
+ eerror "USE flag is set, but ./configure will fail if both are enabled."
+ eerror
+ eerror "This is an upstream issue and not a problem with this ebuild."
+ eerror
+ eerror "To enable both 'flexresp' and 'react' set USE="flexresp -react""
+ eerror
+ eerror
+ die
+ elif use flexresp2 && use react; then
+ eerror
+ eerror "You have both the 'react' and 'flexresp2' USE flags set."
+ eerror "You can use 'react' OR 'flexresp2' but not both."
+ eerror
+ eerror
+ die
+ elif use inline-init-failopen && ! use inline; then
+ eerror
+ eerror "You have enabled the 'inline-init-failopen' USE flag"
+ eerror "but not the 'inline' USE flag."
+ eerror "'inline-init-failopen' requires 'inline' be enabled."
+ eerror
+ eerror
+ die
+ elif use reload-error-restart && ! use reload; then
+ eerror
+ eerror "You have enabled the 'reload-error-restart' USE flag"
+ eerror "but not the 'reload' USE flag."
+ eerror "'reload-error-restart' requires 'reload' be enabled."
+ eerror
+ eerror
+ die
+ elif use zlib && ! use dynamicplugin; then
+ eerror
+ eerror "You have enabled the 'zlib' USE flag but not the 'dynamicplugin' USE flag."
+ eerror "'zlib' requires 'dynamicplugin' be enabled."
+ eerror
+ eerror
+ die
+ fi
+
+ # pre_inst() is a better place to put this
+ # but we need it here for the 'fowners' statements in src_install()
+ enewgroup snort
+ enewuser snort -1 -1 /dev/null snort
+
+}
+
+src_unpack() {
+
+ unpack ${A}
+ cd "${S}"
+
+ # Fix to prevent the docs Makefile from being used.
+ # Fixes #297190.
+ einfo "Applying documentation fix."
+ sed -i -e 's:src doc etc:src etc:g' \
+ "${WORKDIR}/${P}/Makefile.am" || die "Doc fix Failed"
+
+ #Replaces the libnet-1.0 patch for inline, flexresp, and react
+ if use flexresp || use react || use inline; then
+
+ einfo "Applying libnet-1.0 fix."
+ sed -i -e 's:libnet.h:libnet-1.0.h:g' \
+ "${WORKDIR}/${P}/configure.in" \
+ "${WORKDIR}/${P}/src/detection-plugins/sp_react.c" \
+ "${WORKDIR}/${P}/src/detection-plugins/sp_respond.c" \
+ "${WORKDIR}/${P}/src/inline.c" || die "sed for libnet-1.0.h failed"
+
+ sed -i -e 's:libnet-config:libnet-1.0-config:g' \
+ "${WORKDIR}/${P}/configure.in" || die "sed for libnet-1.0-config failed"
+
+ sed -i -e 's:-lnet:-lnet-1.0:g' \
+ "${WORKDIR}/${P}/configure.in" || die "sed for -lnet-1.0 failed"
+
+ sed -i -e 's:AC_CHECK_LIB(net:AC_CHECK_LIB(net-1.0:g' \
+ "${WORKDIR}/${P}/configure.in" || die "sed for net-1.0 failed"
+
+ fi
+
+ #Multilib fix for the sf_engine
+ einfo "Applying multilib fix."
+ sed -i -e 's:${exec_prefix}/lib:${exec_prefix}/'$(get_libdir)':g' \
+ "${WORKDIR}/${P}/src/dynamic-plugins/sf_engine/Makefile.am" \
+ || die "sed for sf_engine failed"
+
+ #Multilib fix for the curent set of dynamic-preprocessors
+ for i in ftptelnet smtp ssh dcerpc dns ssl dcerpc2 sdf; do
+ sed -i -e 's:${exec_prefix}/lib:${exec_prefix}/'$(get_libdir)':g' \
+ "${WORKDIR}/${P}/src/dynamic-preprocessors/$i/Makefile.am" \
+ || die "sed for $i failed."
+ done
+
+ if use prelude; then
+ einfo "Applying prelude fix."
+ sed -i -e "s:AC_PROG_RANLIB:AC_PROG_LIBTOOL:" configure.in
+ fi
+
+ AT_M4DIR=m4 eautoreconf
+}
+
+src_compile() {
+
+ local myconf
+
+ #targetbased and inline-init-failopen automaticly enable pthread
+ if use threads || use targetbased || use inline-init-failopen; then
+ myconf="${myconf} --enable-pthread"
+ fi
+
+ #Tell flexresp, react, and inline where libipq is
+ if use flexresp || use react || use inline; then
+ myconf="${myconf} --with-libipq-includes=/usr/include/libipq"
+ fi
+
+ econf \
+ $(use_enable !static shared) \
+ $(use_enable static) \
+ $(use_enable dynamicplugin) \
+ $(use_enable ipv6) \
+ $(use_enable gre) \
+ $(use_enable mpls) \
+ $(use_enable targetbased) \
+ $(use_enable decoder-preprocessor-rules) \
+ $(use_enable ppm) \
+ $(use_enable timestats) \
+ $(use_enable perfprofiling) \
+ $(use_enable linux-smp-stats) \
+ $(use_enable inline) \
+ $(use_enable inline-init-failopen) \
+ $(use_enable prelude) \
+ $(use_enable debug) \
+ $(use_enable reload) \
+ $(use_enable reload-error-restart) \
+ $(use_enable flexresp) \
+ $(use_enable flexresp2) \
+ $(use_enable react) \
+ $(use_enable aruba) \
+ $(use_enable zlib) \
+ $(use_with mysql) \
+ $(use_with odbc) \
+ $(use_with postgres postgresql) \
+ --disable-build-dynamic-examples \
+ --disable-corefiles \
+ --disable-ipfw \
+ --disable-profile \
+ --disable-ppm-test \
+ --without-oracle \
+ ${myconf}
+
+ emake || die "make failed"
+
+}
+
+src_install() {
+
+ emake DESTDIR="${D}" install || die "make install failed"
+
+ keepdir /var/log/snort/
+ fowners snort:snort /var/log/snort
+
+ keepdir /var/run/snort/
+ fowners snort:snort /var/run/snort/
+
+ dodoc doc/*
+ dodoc ./RELEASE.NOTES
+ docinto schemas
+ dodoc schemas/*
+
+ insinto /etc/snort
+ doins etc/attribute_table.dtd \
+ etc/classification.config \
+ etc/gen-msg.map \
+ etc/reference.config \
+ etc/sid-msg.map \
+ etc/threshold.conf \
+ etc/unicode.map \
+ || die "Failed to add files in /etc/snort"
+
+ newins etc/snort.conf snort.conf.distrib
+
+ insinto /etc/snort/preproc_rules
+ doins preproc_rules/decoder.rules \
+ preproc_rules/preprocessor.rules \
+ || die "Failed to add files in /etc/snort/preproc_rules"
+
+ keepdir /etc/snort/rules/
+
+ keepdir /usr/$(get_libdir)/snort_dynamicrule
+
+ fowners -R snort:snort /etc/snort/
+
+ if use reload; then
+ newinitd "${FILESDIR}/snort.reload.rc1" snort \
+ || die "Failed to add snort.reload.rc1"
+ else
+ newinitd "${FILESDIR}/snort.rc9" snort || die "Failed to add snort.rc9"
+ fi
+
+ newconfd "${FILESDIR}/snort.confd" snort || die "Failed to add snort.confd"
+
+ # Set the correct lib path for dynamicengine, dynamicpreprocessor, and dynamicdetection
+ sed -i -e 's:/usr/local/lib:/usr/'$(get_libdir)':g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Set the correct rule location in the config
+ sed -i -e 's:RULE_PATH ../rules:RULE_PATH /etc/snort/rules:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Set the correct preprocessor/decoder rule location in the config
+ sed -i -e 's:PREPROC_RULE_PATH ../preproc_rules:PREPROC_RULE_PATH /etc/snort/preproc_rules:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Enable the preprocessor/decoder rules
+ sed -i -e 's:^# include $PREPROC_RULE_PATH:include $PREPROC_RULE_PATH:g' \
+ "${D}etc/snort/snort.conf.distrib"
+ sed -i -e 's:^# dynamicdetection directory:dynamicdetection directory:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Just some clean up of trailing /'s in the config
+ sed -i -e 's:snort_dynamicpreprocessor/$:snort_dynamicpreprocessor:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Make it clear in the config where these are...
+ sed -i -e 's:^include classification.config:include /etc/snort/classification.config:g' \
+ "${D}etc/snort/snort.conf.distrib"
+ sed -i -e 's:^include reference.config:include /etc/snort/reference.config:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+ #Disable all rule files by default.
+ #Users need to choose what they want enabled.
+ sed -i -e 's:^include $RULE_PATH:# include $RULE_PATH:g' \
+ "${D}etc/snort/snort.conf.distrib"
+
+}
+
+pkg_postinst() {
+ einfo
+ einfo "Snort is a libpcap based packet capture tool which can be used in"
+ einfo "three modes Sniffer Mode, Packet Logger Mode, or Network Intrusion"
+ einfo "Detection/Prevention System Mode."
+ einfo
+ einfo "To learn more about these modes review the Snort User Manual at..."
+ einfo
+ einfo "http://www.snort.org/docs/"
+ einfo
+ einfo "See /usr/share/doc/${PF} and /etc/snort/snort.conf.distrib for"
+ einfo "information on configuring snort."
+ einfo
+ einfo "Joining the Snort-Users and Snort-Sigs mailing list is highly"
+ einfo "recommended for all users..."
+ einfo
+ einfo "http://www.snort.org/community/mailing-lists/"
+ einfo
+ einfo "To download rules for use with Snort please, see the following"
+ einfo
+ einfo "Sourcefire's VRT Rules and older Community Rules:"
+ einfo "http://www.snort.org/pub-bin/downloads.cgi"
+ einfo
+ einfo "Emerging Threats Rules:"
+ einfo "http://www.emergingthreats.net/"
+ einfo
+ einfo "To manage updates to your rules please visit..."
+ einfo
+ einfo "http://oinkmaster.sourceforge.net/"
+ einfo
+ einfo "and then 'emerge oinkmaster'."
+ elog
+ elog "Snort Release Notes:"
+ elog "http://dl.snort.org/snort-current/release_notes_286.txt"
+ elog
+ elog "!! IMPORTANT !!"
+ elog
+ elog "There have been some changes to the config file shipped"
+ elog "with snort. Users should migrate their current snort.conf"
+ elog "to the new config file. The config file shipped with snort"
+ elog "is located in /etc/snort/snort.conf.distrib."
+ elog
+}
projects / gentoo.git / commitdiff