-# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
## Copyright 1996, 1997, 1998, 1999, 2000, 2001
## Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.
-# serial 46 AC_PROG_LIBTOOL
+# serial 47 AC_PROG_LIBTOOL
+# Debian $Rev: 203 $
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [m4_define([AC_PROVIDE_IFELSE],
+ [m4_ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+ AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [AC_LIBTOOL_CXX],
+ [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+ ])])
+dnl And a similar setup for Fortran 77 support
+ AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [AC_LIBTOOL_F77],
+ [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+ AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+ [AC_LIBTOOL_GCJ],
+ [ifdef([AC_PROG_GCJ],
+ [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+ ifdef([A][M_PROG_GCJ],
+ [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+ ifdef([LT_AC_PROG_GCJ],
+ [define([LT_AC_PROG_GCJ],
+ defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Prevent multiple expansion
define([AC_PROG_LIBTOOL], [])
-])
+])# _AC_PROG_LIBTOOL
+
+# AC_LIBTOOL_SETUP
+# ----------------
AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
+[AC_PREREQ(2.50)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([LT_AC_PROG_SED])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([AC_EXEEXT])dnl
dnl
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
_LT_AC_PROG_ECHO_BACKSLASH
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
fi
;;
esac
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_RESTORE])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
+# Constants:
+rm="rm -f"
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
- [AC_TRY_LINK([],
- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);],
- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
- case $host/$CC in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin* | *-*-pw32*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
- ;;
- ])
-esac
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
-_LT_AC_LTCONFIG_HACK
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
-])
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
-# AC_LIBTOOL_HEADER_ASSERT
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
-[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
- [lt_cv_func_assert_works],
- [case $host in
- *-*-solaris*)
- if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
- case `$CC --version 2>/dev/null` in
- [[12]].*) lt_cv_func_assert_works=no ;;
- *) lt_cv_func_assert_works=yes ;;
- esac
- fi
- ;;
- esac])
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
-if test "x$lt_cv_func_assert_works" = xyes; then
- AC_CHECK_HEADERS(assert.h)
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+ ;;
+ *)
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
-])# AC_LIBTOOL_HEADER_ASSERT
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)
-])# _LT_AC_CHECK_DLFCN
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ AC_PATH_MAGIC
+ fi
+ ;;
+esac
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+AC_ARG_ENABLE([libtool-lock],
+ [AC_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
+AC_ARG_WITH([pic],
+ [AC_HELP_STRING([--with-pic],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [pic_mode="$withval"],
+ [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris* | sysv5*)
- symcode='[[BDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+ [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
;;
esac
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- symcode='[[ABCDGISTW]]'
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X[$]1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
+if test "X[$]1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+[$]*
EOF
+ exit 0
+fi
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
- pipe_works=yes
- fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- global_symbol_to_cdecl=
- global_symbol_to_c_name_address=
-else
- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
- global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-# ---------------------------------
-AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
-[# Find the correct PATH separator. Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
- UNAME=${UNAME-`uname 2>/dev/null`}
- case X$UNAME in
- *-DOS) lt_cv_sys_path_separator=';' ;;
- *) lt_cv_sys_path_separator=':' ;;
- esac
- PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
#
# So, first we look for a working echo in the user's PATH.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
break
fi
done
- IFS="$save_ifs"
+ IFS="$lt_save_ifs"
if test "X$echo" = Xecho; then
# We didn't find a better echo, so look for alternatives.
fi
AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AC_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+ ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test ! -s conftest.err; then
+ $2=yes
+ fi
+ fi
+ $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ ifelse([$5], , :, [$5])
+else
+ ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ else
+ $2=yes
+ fi
+ fi
+ $rm conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ ifelse([$4], , :, [$4])
+else
+ ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ *)
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+ = "XX$teststring") >/dev/null 2>&1 &&
+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ------------------------------------------------------------------
AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[if test "$cross_compiling" = yes; then :
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
[$4]
else
- AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
rm -fr conftest*
])# _LT_AC_TRY_DLOPEN_SELF
+
# AC_LIBTOOL_DLOPEN_SELF
# -------------------
AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[if test "x$enable_dlopen" != xyes; then
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
lt_cv_dlopen_self=yes
;;
- cygwin* | mingw* | pw32*)
+ mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen="shl_load"],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen="dlopen"],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
])
])
])
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
- AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
fi
])# AC_LIBTOOL_DLOPEN_SELF
-AC_DEFUN([_LT_AC_LTCONFIG_HACK],
-[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $rm -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test ! -s out/conftest.err; then
+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w .
+ $rm conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+ $rm out/* && rmdir out
+ cd ..
+ rmdir conftest
+ $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-# Constants:
-rm="rm -f"
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-if test x"$host" != x"$build"; then
- ac_tool_prefix=${host_alias}-
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
else
- ac_tool_prefix=
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+ test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
+ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+
+ # We can hardcode non-existant directories.
+ if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_AC_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_AC_TAGVAR(hardcode_action, $1)=immediate
fi
- ;;
-esac
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-if test -n "$RANLIB"; then
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
- openbsd*)
- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
- ;;
- *)
- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
;;
esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-## FIXME: this should be a separate macro
-##
-AC_MSG_CHECKING([for objdir])
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- objdir=.libs
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
else
- # MS-DOS does not allow filenames that begin with a dot.
- objdir=_libs
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
-rmdir .libs 2>/dev/null
-AC_MSG_RESULT($objdir)
-##
-## END FIXME
-
+need_lib_prefix=unknown
+hardcode_into_libs=no
-## FIXME: this should be a separate macro
-##
-AC_ARG_WITH(pic,
-[ --with-pic try to use only PIC/non-PIC objects [default=use both]],
-pic_mode="$withval", pic_mode=default)
-test -z "$pic_mode" && pic_mode=default
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-AC_CACHE_VAL(lt_cv_prog_cc_pic,
-[ lt_cv_prog_cc_pic=
- lt_cv_prog_cc_shlib=
- lt_cv_prog_cc_wl=
- lt_cv_prog_cc_static=
- lt_cv_prog_cc_no_builtin=
- lt_cv_prog_cc_can_build_shared=$can_build_shared
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
- if test "$GCC" = yes; then
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static='-static'
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
- case $host_os in
- aix*)
- # Below there is a dirty hack to force normal static linking with -ldl
- # The problem is because libdl dynamically linked with both libc and
- # libC (AIX C++ library), which obviously doesn't included in libraries
- # list by gcc. This cause undefined symbols with -static flags.
- # This hack allows C programs to be linked with "-static -ldl", but
- # not sure about C++ programs.
- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_cv_prog_cc_pic='-fno-common'
- ;;
- cygwin* | mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_cv_prog_cc_pic=-Kconform_pic
- fi
- ;;
- *)
- lt_cv_prog_cc_pic='-fPIC'
- ;;
- esac
+aix4* | aix5*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
else
- # PORTME Check for PIC flags for the system compiler.
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
case $host_os in
- aix3* | aix4* | aix5*)
- lt_cv_prog_cc_wl='-Wl,'
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_cv_prog_cc_static='-Bstatic'
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ :
else
- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ can_build_shared=no
fi
;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
- hpux9* | hpux10* | hpux11*)
- # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
- lt_cv_prog_cc_pic='+Z'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static='-non_shared'
- # PIC (with -KPIC) is the default.
- ;;
-
- cygwin* | mingw* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_cv_prog_cc_pic='-DDLL_EXPORT'
- ;;
-
- newsos6)
- lt_cv_prog_cc_pic='-KPIC'
- lt_cv_prog_cc_static='-Bstatic'
- ;;
-
- osf3* | osf4* | osf5*)
- # All OSF/1 code is PIC.
- lt_cv_prog_cc_wl='-Wl,'
- lt_cv_prog_cc_static='-non_shared'
- ;;
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
- sco3.2v5*)
- lt_cv_prog_cc_pic='-Kpic'
- lt_cv_prog_cc_static='-dn'
- lt_cv_prog_cc_shlib='-belf'
- ;;
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
- solaris*)
- lt_cv_prog_cc_pic='-KPIC'
- lt_cv_prog_cc_static='-Bstatic'
- lt_cv_prog_cc_wl='-Wl,'
- ;;
+bsdi4*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
- sunos4*)
- lt_cv_prog_cc_pic='-PIC'
- lt_cv_prog_cc_static='-Bstatic'
- lt_cv_prog_cc_wl='-Qoption ld '
- ;;
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- lt_cv_prog_cc_pic='-KPIC'
- lt_cv_prog_cc_static='-Bstatic'
- lt_cv_prog_cc_wl='-Wl,'
- ;;
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $rm \$dlpath'
+ shlibpath_overrides_runpath=yes
- uts4*)
- lt_cv_prog_cc_pic='-pic'
- lt_cv_prog_cc_static='-Bstatic'
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_cv_prog_cc_pic='-Kconform_pic'
- lt_cv_prog_cc_static='-Bstatic'
+ mingw*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
-
- *)
- lt_cv_prog_cc_can_build_shared=no
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
- fi
-])
-if test -z "$lt_cv_prog_cc_pic"; then
- AC_MSG_RESULT([none])
-else
- AC_MSG_RESULT([$lt_cv_prog_cc_pic])
-
- # Check to make sure the pic_flag actually works.
- AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
- AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
- AC_TRY_COMPILE([], [], [dnl
- case $host_os in
- hpux9* | hpux10* | hpux11*)
- # On HP-UX, both CC and GCC only warn that PIC is supported... then
- # they create non-PIC objects. So, if there were any warnings, we
- # assume that PIC is not supported.
- if test -s conftest.err; then
- lt_cv_prog_cc_pic_works=no
- else
- lt_cv_prog_cc_pic_works=yes
- fi
- ;;
- *)
- lt_cv_prog_cc_pic_works=yes
- ;;
- esac
- ], [dnl
- lt_cv_prog_cc_pic_works=no
- ])
- CFLAGS="$save_CFLAGS"
- ])
+ ;;
- if test "X$lt_cv_prog_cc_pic_works" = Xno; then
- lt_cv_prog_cc_pic=
- lt_cv_prog_cc_can_build_shared=no
- else
- lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
- fi
-
- AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
-fi
-##
-## END FIXME
-
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
- AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
- if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then :
- else
- AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
- lt_cv_prog_cc_can_build_shared=no
- fi
-fi
-
-## FIXME: this should be a separate macro
-##
-AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
-AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
- lt_cv_prog_cc_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
- AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
- LDFLAGS="$save_LDFLAGS"
-])
-
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
-
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
-##
-## END FIXME
-
-
-## FIXME: this should be a separate macro
-##
-# Check to see if options -o and -c are simultaneously supported by compiler
-AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
-AC_CACHE_VAL([lt_cv_compiler_c_o], [
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory. Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s out/conftest.err; then
- lt_cv_compiler_c_o=no
- else
- lt_cv_compiler_c_o=yes
- fi
-else
- # Append any errors to the config.log.
- cat out/conftest.err 1>&AC_FD_CC
- lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-])
-compiler_c_o=$lt_cv_compiler_c_o
-AC_MSG_RESULT([$compiler_c_o])
-
-if test x"$compiler_c_o" = x"yes"; then
- # Check to see if we can write to a .lo
- AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
- AC_CACHE_VAL([lt_cv_compiler_o_lo], [
- lt_cv_compiler_o_lo=no
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -c -o conftest.lo"
- save_objext="$ac_objext"
- ac_objext=lo
- AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- lt_cv_compiler_o_lo=no
- else
- lt_cv_compiler_o_lo=yes
- fi
- ])
- ac_objext="$save_objext"
- CFLAGS="$save_CFLAGS"
- ])
- compiler_o_lo=$lt_cv_compiler_o_lo
- AC_MSG_RESULT([$compiler_o_lo])
-else
- compiler_o_lo=no
-fi
-##
-## END FIXME
-
-## FIXME: this should be a separate macro
-##
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-##
-## END FIXME
-
-## FIXME: this should be a separate macro
-##
-if test "$GCC" = yes; then
- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
- AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
- echo "int some_variable = 0;" > conftest.$ac_ext
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
- compiler_rtti_exceptions=no
- AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- compiler_rtti_exceptions=no
- else
- compiler_rtti_exceptions=yes
- fi
- ])
- CFLAGS="$save_CFLAGS"
- AC_MSG_RESULT([$compiler_rtti_exceptions])
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
- if test "$compiler_rtti_exceptions" = "yes"; then
- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
else
- no_builtin_flag=' -fno-builtin'
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
fi
-fi
-##
-## END FIXME
-
-## FIXME: this should be a separate macro
-##
-# See if the linker supports building shared libraries.
-AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced. Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
-case $host_os in
-cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
;;
-openbsd*)
- with_gnu_ld=no
+
+freebsd1*)
+ dynamic_linker=no
;;
-esac
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
- # See if GNU ld supports shared libraries.
+freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX, the GNU linker is very broken
- # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
;;
-
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can use
- # them.
- ld_shlibs=no
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
;;
-
- beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
+ *) # from 3.2 on
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
;;
+ esac
+ ;;
- cygwin* | mingw* | pw32*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- allow_undefined_flag=unsupported
- always_export_symbols=yes
-
- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
- test -f $output_objdir/impgen.exe || (cd $output_objdir && \
- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
- else $CC -o impgen impgen.c ; fi)~
- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
- # cygwin and mingw dlls have different entry points and sets of symbols
- # to exclude.
- # FIXME: what about values for MSVC?
- dll_entry=__cygwin_dll_entry@12
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
- case $host_os in
- mingw*)
- # mingw values
- dll_entry=_DllMainCRTStartup@12
- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
- ;;
- esac
-
- # mingw and cygwin differ, and it's simplest to just exclude the union
- # of the two symbol sets.
- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one (in ltdll.c)
- if test "x$lt_cv_need_dllmain" = "xyes"; then
- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
- else
- ltdll_obj=
- ltdll_cmds=
- fi
-
- # Extract the symbol export list from an `--export-all' def file,
- # then regenerate the def file from the symbol export list, so that
- # the compiled dll only exports the symbol export list.
- # Be careful not to strip the DATA tag left be newer dlltools.
- export_symbols_cmds="$ltdll_cmds"'
- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is.
- # If DATA tags from a recent dlltool are present, honour them!
- archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname-def;
- else
- echo EXPORTS > $output_objdir/$soname-def;
- _lt_hint=1;
- cat $export_symbols | while read symbol; do
- set dummy \$symbol;
- case \[$]# in
- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
- 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
- esac;
- _lt_hint=`expr 1 + \$_lt_hint`;
- done;
- fi~
- '"$ltdll_cmds"'
- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
- ;;
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case "$host_cpu" in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
- archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
-
- solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
;;
-
*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
;;
esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- case $host_os in
- cygwin* | mingw* | pw32*)
- # dlltool doesn't understand --whole-archive et. al.
- whole_archive_flag_spec=
- ;;
- *)
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- ;;
- esac
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
+# This must be Linux ELF.
+linux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- esac
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+knetbsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
- hardcode_direct=yes
- archive_cmds=''
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- hardcode_direct=yes
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+nto-qnx*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+openbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=yes
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
- shared_flag='-shared'
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- shared_flag='${wl}-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
- # It seems that -bexpall can do strange things, so it is better to
- # generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
- else
- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='${wl}-berok'
- # This is a bit strange, but is similar to how AIX traditionally builds
- # it's shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
- amigaos*)
- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- ;;
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
- darwin* | rhapsody*)
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- allow_undefined_flag='-undefined suppress'
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ runpath_var=LD_RUN_PATH
;;
- *) # Darwin 1.3 on
- allow_undefined_flag='-flat_namespace -undefined suppress'
+ siemens)
+ need_lib_prefix=no
;;
- esac
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
- # yet detect zsh echo's removal of \ escapes. Also zsh mangles
- # `"' quotes if we put them in here... so don't!
- archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
- # We need to add '_' to the symbols in $export_symbols first
- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- whole_archive_flag_spec='-all_load $convenience'
- ;;
-
- freebsd1*)
- ld_shlibs=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
- hpux9* | hpux10* | hpux11*)
- case $host_os in
- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
- esac
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_minus_L=yes # Not in the search PATH, but as the default
- # location of the library.
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- link_all_deplibs=yes
- ;;
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
- openbsd*)
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case "$host_os" in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- ;;
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+ [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+ [include additional configurations @<:@automatic@:>@])],
+ [tagnames="$withval"])
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
+if test -f "$ltmain" && test -n "$tagnames"; then
+ if test ! -f "${ofile}"; then
+ AC_MSG_WARN([output file `$ofile' does not exist])
+ fi
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test -z "$LTCC"; then
+ eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+ if test -z "$LTCC"; then
+ AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
fi
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
+ fi
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ # Extract list of available tagged configurations in $ofile.
+ # Note that this assumes the entire list is on one line.
+ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for tagname in $tagnames; do
+ IFS="$lt_save_ifs"
+ # Check whether tagname contains only valid characters
+ case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+ "") ;;
+ *) AC_MSG_ERROR([invalid tag name: $tagname])
+ ;;
+ esac
- #Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+ then
+ AC_MSG_ERROR([tag name \"$tagname\" already exists])
fi
- hardcode_libdir_separator=:
- ;;
- sco3.2v5*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- ;;
+ # Update the list of available tags.
+ if test -n "$tagname"; then
+ echo appending configuration tag \"$tagname\" to $ofile
- solaris*)
- # gcc --version < 3.0 without binutils cannot create self contained
- # shared libraries reliably, requiring libgcc.a to resolve some of
- # the object symbols generated in some cases. Libraries that use
- # assert need libgcc.a to resolve __eprintf, for example. Linking
- # a copy of libgcc.a into every shared library to guarantee resolving
- # such symbols causes other problems: According to Tim Van Holder
- # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
- # (to the application) exception stack for one thing.
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- case `$CC --version 2>/dev/null` in
- [[12]].*)
- cat <<EOF 1>&2
+ case $tagname in
+ CXX)
+ if test -n "$CXX" && test "X$CXX" != "Xno"; then
+ AC_LIBTOOL_LANG_CXX_CONFIG
+ else
+ tagname=""
+ fi
+ ;;
+
+ F77)
+ if test -n "$F77" && test "X$F77" != "Xno"; then
+ AC_LIBTOOL_LANG_F77_CONFIG
+ else
+ tagname=""
+ fi
+ ;;
+
+ GCJ)
+ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+ AC_LIBTOOL_LANG_GCJ_CONFIG
+ else
+ tagname=""
+ fi
+ ;;
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries. However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
-*** upgrade to a newer version of GCC. Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+ RC)
+ AC_LIBTOOL_LANG_RC_CONFIG
+ ;;
-EOF
- no_undefined_flag=
+ *)
+ AC_MSG_ERROR([Unsupported tag name: $tagname])
;;
esac
- fi
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
- esac
- link_all_deplibs=yes
- ;;
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ # Append the new tag name to the list of available tags.
+ if test -n "$tagname" ; then
+ available_tags="$available_tags $tagname"
fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
+ fi
+ done
+ IFS="$lt_save_ifs"
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv5*)
- no_undefined_flag=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- hardcode_libdir_flag_spec=
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
- ;;
+ # Now substitute the updated list of available tags.
+ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+ mv "${ofile}T" "$ofile"
+ chmod +x "$ofile"
+ else
+ rm -f "${ofile}T"
+ AC_MSG_ERROR([unable to update list of available tagged configurations.])
+ fi
+fi
+])# _LT_AC_TAGCONFIG
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
- sysv4.2uw2*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
- sysv5uw7* | unixware7*)
- no_undefined_flag='${wl}-z ${wl}text'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-AC_MSG_RESULT([$ld_shlibs])
-test "$ld_shlibs" = no && can_build_shared=no
-##
-## END FIXME
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+ [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
-## FIXME: this should be a separate macro
-##
-# Check hardcoding attributes.
-AC_MSG_CHECKING([how to hardcode library paths into programs])
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$hardcode_shlibpath_var" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-AC_MSG_RESULT([$hardcode_action])
-##
-## END FIXME
+# AC_DISABLE_SHARED
+# -----------------
+#- set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
-## FIXME: this should be a separate macro
-##
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
- AC_MSG_RESULT([no])
-fi
-##
-## END FIXME
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+ [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
-## FIXME: this should be a separate macro
-##
-# PORTME Fill in your ld.so characteristics
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix $libname.a'
- shlibpath_var=LIBPATH
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
- # AIX has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so$major'
- ;;
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+ [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can
- # not hardcode correct soname into executable. Probably we can
- # add versioning support to collect2, so additional links can
- # be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}.so$major'
- fi
- shlibpath_var=LIBPATH
- fi
- hardcode_into_libs=yes
- ;;
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-beos*)
- library_names_spec='${libname}.so'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
-bsdi4*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- export_dynamic_flag_spec=-rdynamic
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-cygwin* | mingw* | pw32*)
- version_type=windows
- need_version=no
- need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin*)
- library_names_spec='$libname.dll.a'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog .libs/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- ;;
- yes,mingw*)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
- ;;
- yes,pw32*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
- ;;
- *)
- library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+ [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- # FIXME: Relying on posixy $() will cause problems for
- # cross-compilation, but unfortunately the echo tests do not
- # yet detect zsh echo's removal of \ escapes.
- library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
- soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- ;;
-freebsd1*)
- dynamic_linker=no
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="ifelse([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
-freebsd*-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU/FreeBSD ld.so'
- ;;
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- *)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- esac
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- dynamic_linker="$host_os dld.sl"
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
- soname_spec='${libname}${release}.sl$major'
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# AC_PATH_MAGIC
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *) version_type=irix ;;
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+ [AC_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
;;
*)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
;;
esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
- dynamic_linker=no
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+ lt_cv_deplibs_check_method=pass_all
;;
-# This must be Linux ELF.
-linux-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
;;
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
- soname_spec='${libname}${release}.so$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
;;
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
-openbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case "$host_os" in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | kfreebsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
- shlibpath_overrides_runpath=yes
+ lt_cv_deplibs_check_method=pass_all
fi
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
;;
-os2*)
- libname_spec='$name'
- need_lib_prefix=no
- library_names_spec='$libname.dll $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
;;
-osf3* | osf4* | osf5*)
- version_type=osf
- need_version=no
- need_lib_prefix=no
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- hardcode_into_libs=yes
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case "$host_cpu" in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
;;
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}.so$major'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
;;
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
+# This must be Linux ELF.
+linux*)
+ lt_cv_deplibs_check_method=pass_all
;;
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
+netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
fi
- need_version=yes
;;
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
+nto-qnx*)
+ lt_cv_deplibs_check_method=unknown
;;
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
- soname_spec='${libname}${release}.so$major'
- shlibpath_var=LD_LIBRARY_PATH
+openbsd*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+ else
+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ fi
;;
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
- soname_spec='$libname.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
;;
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
*)
- dynamic_linker=no
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
;;
esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-##
-## END FIXME
+])# AC_CHECK_LIBM
-## FIXME: this should be a separate macro
-##
-# Report the final consequences.
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case $enable_ltdl_convenience in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ # For backwards non-gettext consistent compatibility...
+ INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
+# DIRECTORY is not provided and an installed libltdl is not found, it is
+# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!). If your package is not flat and you're not using automake,
+# define top_builddir and top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, lt_dlinit,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ LTDLINCL=
+ fi
+ # For backwards non-gettext consistent compatibility...
+ INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+ [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+ [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+ [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+ [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# --------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+_LT_AC_SYS_COMPILER
+
+#
+# Check for any special shared library compilation flags.
+#
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+if test "$GCC" = no; then
+ case $host_os in
+ sco3.2v5*)
+ _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+ ;;
+ esac
+fi
+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+ AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+ if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then :
+ else
+ AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+ _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+ fi
+fi
+
+
+#
+# Check to make sure the static flag actually works.
+#
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+ $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+ [],
+ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+# Report which librarie types wil actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
-##
-## END FIXME
-## FIXME: this should be a separate macro
-##
AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no
fi
;;
-aix4*)
+aix4* | aix5*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
+ darwin* | rhapsody*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ ;;
+ 10.*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ output_verbose_link_cmd='echo'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
esac
AC_MSG_RESULT([$enable_shared])
-##
-## END FIXME
-## FIXME: this should be a separate macro
-##
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])
-##
-## END FIXME
-if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
+AC_LIBTOOL_CONFIG($1)
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
-AC_LIBTOOL_DLOPEN_SELF
-## FIXME: this should be a separate macro
-##
-if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
- [$rm conftest*
- echo 'static int dummy;' > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile); then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_cv_prog_cc_wl
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- lt_cv_archive_cmds_need_lc=no
- else
- lt_cv_archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi])
- AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
- ;;
- esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
-##
-## END FIXME
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cc
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
-## FIXME: this should be a separate macro
-##
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- :
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- test -f Makefile && make "$ltmain"
+ unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+ unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
-if test -f "$ltmain"; then
- trap "$rm \"${ofile}T\"; exit 1" 1 2 15
- $rm -f "${ofile}T"
+if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
- echo creating $ofile
+ AC_PROG_LD
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS SED \
- AR AR_FLAGS CC LD LN_S NM SHELL \
- reload_flag reload_cmds wl \
- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
- thread_safe_flag_spec whole_archive_flag_spec libname_spec \
- library_names_spec soname_spec \
- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
- postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
- old_striplib striplib file_magic_cmd export_symbols_cmds \
- deplibs_check_method allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
- global_symbol_to_c_name_address \
- hardcode_libdir_flag_spec hardcode_libdir_separator \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
- case $var in
- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
- extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- cat <<__EOF__ > "${ofile}T"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-# A sed that does not truncate output.
-SED=$lt_SED
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="${SED} -e s/^X//"
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+ grep 'no-whole-archive' > /dev/null; then
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
-# ### BEGIN LIBTOOL CONFIG
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+fi
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ esac
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-# The host system.
-host_alias=$host_alias
-host=$host
+ _LT_AC_TAGVAR(archive_cmds, $1)=''
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ else
+ # We have old collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-# The default C compiler.
-CC=$lt_CC
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # -bexpall does not export symbols beginning with underscore (_)
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds it's shared libraries.
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
+ cygwin* | mingw* | pw32*)
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
-# The linker used to build libraries.
-LD=$lt_LD
+ darwin* | rhapsody*)
+ if test "$GXX" = yes; then
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ ;;
+ 10.*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+ output_verbose_link_cmd='echo'
+ if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ fi
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
-# A BSD-compatible nm program.
-NM=$lt_NM
+ dgux*)
+ case $cc_basename in
+ ec++)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+ freebsd[12]*)
+ # C++ shared libraries reported to be fairly broken before switch to ELF
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ freebsd-elf*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+ freebsd* | kfreebsd*-gnu)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+ gnu*)
+ ;;
+ hpux9*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+ ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+ *)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ ia64*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ *)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
-# A symbol stripping program
-STRIP="$STRIP"
+ case $cc_basename in
+ CC)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC)
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case "$host_cpu" in
+ ia64*|hppa*64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC)
+ # SGI C++
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+ fi
+ fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+ linux*)
+ case $cc_basename in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc)
+ # Intel C++
+ with_gnu_ld=yes
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ cxx)
+ # Compaq C++
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ esac
+ ;;
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+ netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+ osf3*)
+ case $cc_basename in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-# Used on cygwin: assembler.
-AS="$AS"
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ osf4* | osf5*)
+ case $cc_basename in
+ KCC)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
+ $rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ sco*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case $cc_basename in
+ CC)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The C++ compiler is used as linker so we must use $wl
+ # flag to pass the commands to the underlying system
+ # linker.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx)
+ # Green Hills C++ Compiler
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | grep -v '^2\.7' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+ fi
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ fi
+ ;;
+ esac
+ ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ # The `*' in the case matches for architectures that use `case' in
+ # $output_verbose_cmd can trigger glob expansion during the loop
+ # eval without this substitution.
+ output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+
+ for p in `eval $output_verbose_link_cmd`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" \
+ || test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+ _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+ _LT_AC_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+ _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code=" subroutine t\n return\n end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code=" program t\n end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+aix4* | aix5*)
+ test "$enable_shared" = yes && enable_static=no
+ ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars. Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+ # See if we are running on zsh, and set the options which allow our commands through
+ # without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+ SED SHELL STRIP \
+ libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+ old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+ deplibs_check_method reload_flag reload_cmds need_locks \
+ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+ lt_cv_sys_global_symbol_to_c_name_address \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ old_postinstall_cmds old_postuninstall_cmds \
+ _LT_AC_TAGVAR(compiler, $1) \
+ _LT_AC_TAGVAR(CC, $1) \
+ _LT_AC_TAGVAR(LD, $1) \
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+ _LT_AC_TAGVAR(old_archive_cmds, $1) \
+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+ _LT_AC_TAGVAR(predep_objects, $1) \
+ _LT_AC_TAGVAR(postdep_objects, $1) \
+ _LT_AC_TAGVAR(predeps, $1) \
+ _LT_AC_TAGVAR(postdeps, $1) \
+ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+ _LT_AC_TAGVAR(archive_cmds, $1) \
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+ _LT_AC_TAGVAR(postinstall_cmds, $1) \
+ _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+ _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+ _LT_AC_TAGVAR(no_undefined_flag, $1) \
+ _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+ _LT_AC_TAGVAR(hardcode_automatic, $1) \
+ _LT_AC_TAGVAR(module_cmds, $1) \
+ _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+ _LT_AC_TAGVAR(exclude_expsyms, $1) \
+ _LT_AC_TAGVAR(include_expsyms, $1); do
+
+ case $var in
+ _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+ _LT_AC_TAGVAR(archive_cmds, $1) | \
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(module_cmds, $1) | \
+ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+ extract_expsyms_cmds | reload_cmds | finish_cmds | \
+ postinstall_cmds | postuninstall_cmds | \
+ old_postinstall_cmds | old_postuninstall_cmds | \
+ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+ # Double-quote double-evaled strings.
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+ ;;
+ *)
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+ ;;
+ esac
+ done
+
+ case $lt_echo in
+ *'\[$]0 --fallback-echo"')
+ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+ ;;
+ esac
+
+ifelse([$1], [],
+ [cfgfile="${ofile}T"
+ trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+ $rm -f "$cfgfile"
+ AC_MSG_NOTICE([creating $ofile])],
+ [cfgfile="$ofile"])
+
+ cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
-wl=$lt_wl
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
pic_mode=$pic_mode
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
# Library versioning type.
version_type=$version_type
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
-hardcode_direct=$hardcode_direct
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-# ### END LIBTOOL CONFIG
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
__EOF__
+ifelse([$1],[], [
case $host_os in
aix3*)
- cat <<\EOF >> "${ofile}T"
+ cat <<\EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
COLLECT_NAMES=
export COLLECT_NAMES
fi
-EOF
- ;;
- esac
-
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- cat <<'EOF' >> "${ofile}T"
- # This is a source program that is used to create dlls on Windows
- # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
- # This is a source program that is used to create import libraries
- # on Windows for dlls which lack them. Don't remove nor modify the
- # starting and closing comments
-# /* impgen.c starts here */
-# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-# This file is part of GNU libtool.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# */
-#
-# #include <stdio.h> /* for printf() */
-# #include <unistd.h> /* for open(), lseek(), read() */
-# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
-# #include <string.h> /* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[2];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 2);
-# return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[4];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 4);
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-# void *ptr;
-# {
-# unsigned char *b = ptr;
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-# int argc;
-# char *argv[];
-# {
-# int dll;
-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-# unsigned long export_rva, export_size, nsections, secptr, expptr;
-# unsigned long name_rvas, nexp;
-# unsigned char *expdata, *erva;
-# char *filename, *dll_name;
-#
-# filename = argv[1];
-#
-# dll = open(filename, O_RDONLY|O_BINARY);
-# if (dll < 1)
-# return 1;
-#
-# dll_name = filename;
-#
-# for (i=0; filename[i]; i++)
-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
-# dll_name = filename + i +1;
-#
-# pe_header_offset = pe_get32 (dll, 0x3c);
-# opthdr_ofs = pe_header_offset + 4 + 20;
-# num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-# if (num_entries < 1) /* no exports */
-# return 1;
-#
-# export_rva = pe_get32 (dll, opthdr_ofs + 96);
-# export_size = pe_get32 (dll, opthdr_ofs + 100);
-# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-# secptr = (pe_header_offset + 4 + 20 +
-# pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-# expptr = 0;
-# for (i = 0; i < nsections; i++)
-# {
-# char sname[8];
-# unsigned long secptr1 = secptr + 40 * i;
-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# lseek(dll, secptr1, SEEK_SET);
-# read(dll, sname, 8);
-# if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# {
-# expptr = fptr + (export_rva - vaddr);
-# if (export_rva + export_size > vaddr + vsize)
-# export_size = vsize - (export_rva - vaddr);
-# break;
-# }
-# }
-#
-# expdata = (unsigned char*)malloc(export_size);
-# lseek (dll, expptr, SEEK_SET);
-# read (dll, expdata, export_size);
-# erva = expdata - export_rva;
-#
-# nexp = pe_as32 (expdata+24);
-# name_rvas = pe_as32 (expdata+32);
-#
-# printf ("EXPORTS\n");
-# for (i = 0; i<nexp; i++)
-# {
-# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-# }
-#
-# return 0;
-# }
-# /* impgen.c ends here */
-
EOF
;;
esac
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
- mv -f "${ofile}T" "$ofile" || \
- (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+ mv -f "$cfgfile" "$ofile" || \
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
+])
+else
+ # If there is no Makefile yet, we rely on a make rule to execute
+ # `config.status --recheck' to rerun these tests and create the
+ # libtool script then.
+ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+ if test -f "$ltmain_in"; then
+ test -f Makefile && make "$ltmain"
+ fi
fi
-##
-## END FIXME
+])# AC_LIBTOOL_CONFIG
-])# _LT_AC_LTCONFIG_HACK
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
+if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
+ AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-# Where MODE is either `yes' or `no'. If omitted, it defaults to
-# `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+cygwin* | mingw* | pw32*)
+ symcode='[[ABCDGISTW]]'
;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
+hpux*) # Its linker distinguishes data from code symbols
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris* | sysv5*)
+ symcode='[[BDRT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ rm -f conftest*
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])
+ # Make sure that we snagged all the symbols we need.
+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
+ cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
else
- test "$with_gnu_ld" != yes && break
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
fi
- done
- IFS="$ac_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
else
- AC_MSG_RESULT(no)
+ AC_MSG_RESULT(ok)
fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | os2* | pw32*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix4* | aix5*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68)
+ # Green Hills C++ Compiler
+ # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx)
+ # Green Hills C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | kfreebsd*-gnu)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ if test "$host_cpu" != ia64; then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux*)
+ case $cc_basename in
+ KCC)
+ # KAI C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ icpc)
+ # Intel C++
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ cxx)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd* | knetbsd*-gnu)
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC)
+ # Rational C++ 2.4.1
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx)
+ # Digital/Compaq C++
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ sco*)
+ case $cc_basename in
+ CC)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx)
+ # Green Hills C++ Compiler
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC)
+ # Sun C++ 4.x
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc)
+ # Lucid
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC)
+ # NonStop-UX NCC 3.20
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ unixware*)
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ newsos6)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ linux*)
+ case $CC in
+ icc* | ecc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ ccc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ esac
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ sco3.2v5*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+ ;;
+
+ solaris*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sunos4*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
-# AC_PROG_LD_GNU -
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
-else
- lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ uts4*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+ _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+ [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case "$host_os" in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
])
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+ aix4* | aix5*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
+ cygwin* | mingw*)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
-
-bsdi4*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
+ linux*)
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
;;
-
-cygwin* | mingw* | pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+ *)
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
+ esac
+],[
+ runpath_var=
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_AC_TAGVAR(archive_cmds, $1)=
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+ _LT_AC_TAGVAR(module_cmds, $1)=
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_AC_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ extract_expsyms_cmds=
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ openbsd*)
+ with_gnu_ld=no
;;
esac
- ;;
-freebsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ fi
+ ;;
+
+ amigaos*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can't use
+ # them.
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=no
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sunos4*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+ if test $supports_anon_versioning = yes; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ else
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
+ fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
;;
esac
+
+ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
+ runpath_var=LD_RUN_PATH
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ fi
else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_AC_TAGVAR(archive_cmds, $1)=''
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ else
+ # We have old collect2
+ _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ _LT_AC_SYS_LIBPATH_AIX
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # -bexpall does not export symbols beginning with underscore (_)
+ _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds it's shared libraries.
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ # see comment about different semantics on the GNU ld section
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ bsdi4*)
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ darwin* | rhapsody*)
+ if test "$GXX" = yes ; then
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ case "$host_os" in
+ rhapsody* | darwin1.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+ ;;
+ 10.*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ lt_int_apple_cc_single_mod=no
+ output_verbose_link_cmd='echo'
+ if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ fi
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ dgux*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ freebsd1*)
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | kfreebsd*-gnu)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10* | hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case "$host_cpu" in
+ hppa*64*|ia64*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ ia64*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ *)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd* | knetbsd*-gnu)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ openbsd*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
+ # Both c and cxx compiler support -rpath directly
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
-irix5* | irix6* | nonstopux*)
- case $host_os in
- irix5* | nonstopux*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
+ sco3.2v5*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ;;
-# This must be Linux ELF.
-linux-gnu*)
- case $host_cpu in
- alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
+ solaris*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+ esac
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
- fi
- ;;
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
-openbsd*)
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
- else
- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
- fi
- ;;
+ sysv4.3*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ sysv4.2uw2*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+ if test "$GCC" = yes; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ runpath_var='LD_RUN_PATH'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
-sysv5uw[[78]]* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
+ sysv5*)
+ _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+ ;;
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
+ uts4*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ fi
])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
- break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
- break
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_AC_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $rm conftest*
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+ then
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
+ cat conftest.err 1>&5
fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
+ $rm conftest*
+ AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+ ;;
+ esac
+ fi
;;
esac
-])
+])# AC_LIBTOOL_PROG_LD_SHLIBS
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and LTDLINCL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments. Note that LIBLTDL and LTDLINCL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
-# with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and LTDLINCL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!). If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# # ifdef __CYGWIN32__
+# # define __CYGWIN__ __CYGWIN32__
+# # endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+# __hDllInstance_base = hInst;
+# return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
# old names
AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
# This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
-as_executable_p="test -f"
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
+ for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
-
- # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=$TMPDIR/sed$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in $TMPDIR" >&2
- { (exit 1); exit 1; }
-}
- _max=0
- _count=0
- # Add /usr/xpg4/bin/sed as it is typically found on Solaris
- # along with /bin/sed that truncates output.
- for _sed in $_sed_list /usr/xpg4/bin/sed; do
- test ! -f ${_sed} && break
- cat /dev/null > "$tmp/sed.in"
- _count=0
- echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
- # Check for GNU sed and select it if it is found.
- if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
- lt_cv_path_SED=${_sed}
- break
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && break
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
fi
- while true; do
- cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
- mv "$tmp/sed.tmp" "$tmp/sed.in"
- cp "$tmp/sed.in" "$tmp/sed.nl"
- echo >>"$tmp/sed.nl"
- ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
- cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
- # 40000 chars as input seems more than enough
- test $_count -gt 10 && break
- _count=`expr $_count + 1`
- if test $_count -gt $_max; then
- _max=$_count
- lt_cv_path_SED=$_sed
- fi
- done
done
- rm -rf "$tmp"
+done
+SED=$lt_cv_path_SED
])
-if test "X$SED" != "X"; then
- lt_cv_path_SED=$SED
-else
- SED=$lt_cv_path_SED
-fi
AC_MSG_RESULT([$SED])
])
projects / gpgme.git / commitdiff