% \changes{0.13}{2010/07/28}{W.~Trevor King cleaned up TOC/LOT/LOF code.}
% \changes{0.14}{2010/09/21}{Evan Sultanik added the
% \texttt{approvalform} option for including a \LaTeX\ version of
-% the \texttt{T-1} thesis form.}
+% the T-1 thesis form.}
%
% \MakeShortVerb{\|}
% \newcommand{\pkg}[1]{\textsf{#1}}
% \Lopt{indentfirst} indents the first paragraph after sections etc.
%
% \DescribeOption{approvalform}
-% \Lopt{approvalform} includes a copy of the \texttt{T-1} thesis
-% approval form as the first page of your thesis/dissertation. This
-% form is bound to the front of very thesis/dissertation by the
+% \Lopt{approvalform} includes a copy of the
+% \href{http://www.drexel.edu/graduatestudies/forms/Thesis_Approval_Form.pdf}{%
+% T-1} approval form as the first page of your thesis/dissertation.
+% This form is bound to the front of every thesis/dissertation by the
% library. The version that is generated by this option is typeset in
-% \LaTeX\ with the same margins, fonts, \textit{\&c.}~as the rest of
+% \LaTeX\ with the same margins, fonts, etc.~as the rest of
% your document. The title of your dissertation and your name are
% automatically entered.
%
% \end{example}
%
% \begin{command}
-% `\cs{makeapprovalform}'
-% \end{command}
-% \DescribeMacro{\makeapprovalform}
-% Typesets the \texttt{T-1} thesis approval form. This macro is
-% automatically called before the title page when the
-% \texttt{approvalform} option is enabled.
-%
-%
-% \begin{command}
% `\cs{drexellogobw}'
% \end{command}
% \DescribeMacro{\drexellogobw}
% Draws a black-and-white official vector Drexel logo. The image is
% exactly 1~inch wide and 1.016~inches tall. This is accomplished
-% using the \texttt{tikz} package (\textit{cf.}~\S\ref{sec:tikz}).
-% You can enclose this command in a \texttt{scalebox} to alter its
-% size.
+% using the \pkg{tikz} package (\S~\ref{sec:tikz}). You can enclose
+% this command in a |\scalebox| to alter its size.
%
%
% \subsection{Environments}
% \end{macrocode}
% \end{macro}
%
-% \begin{macro}{\makeapprovalform}
-% Typesets the \texttt{T-1} thesis/dissertation approval form.
+% \begin{macro}{\DUT@makeapprovalform}
+% Typesets the T-1 thesis/dissertation approval form.
% \changes{0.14}{2010/09/21}{Evan Sultanik added macro.}
% \begin{macrocode}
-\newcommand\makeapprovalform{
+\newcommand\DUT@makeapprovalform{
\thispagestyle{empty}
- \noindent\drexellogobw\hfill
- \dimen0=\hsize
- \advance\dimen0 by -1.25in
- \vbox to 1in{
- \vfill
- \hbox to \dimen0{\Huge\textbf{Office of Graduate Studies}}
- \hbox{}
- \hbox to \dimen0{\LARGE\textbf{Dissertation/Thesis Approval Form}}
- \vfill
- }
-
- \vskip0.25in
-
- \noindent This form is for use by all doctoral and master's
- students with a dissertation/thesis requirement. Please print
- clearly as the library will bind a copy of this form with each
- copy of the dissertation/thesis. All doctoral dissertations must
- conform to university format requirements, which is the
- responsibility of the student and supervising professor. Students
- should obtain a copy of the Thesis Manual located on the library
- website.
+ \begingroup
+ \newlength{\tempskipa}
+ \newlength{\tempskipb}
+% \end{macrocode}
+% Don't indent paragraphs on this page.
+% \begin{macrocode}
+ \parindent \z@
+% \end{macrocode}
+% Setup $\mbox{tempskipa} = \mbox{logo width} + \mbox{4pt}$ and
+% $\mbox{tempskipb} = \mbox{textwidth} - \mbox{tempskipa} -
+% \mbox{4pt}$. The first |pt| ensures the logo will fit in the left
+% column; the second provides some buffer space between the minipages.
+% \begin{macrocode}
+ \settowidth{\tempskipa}{\drexellogobw}
+ \addtolength{\tempskipa}{1em}
+ \setlength{\tempskipb}{\textwidth}
+ \addtolength{\tempskipb}{-\tempskipa}
+ \addtolength{\tempskipb}{-1em}
+% \end{macrocode}
+% Add the logo and form title in columns. Each column is in a minipage.
+% \begin{macrocode}
+ \begin{minipage}[c]{\tempskipa}
+% \end{macrocode}
+% |\raisebox| drops the logo so that the image is centered on the baseline.
+% \begin{macrocode}
+ \raisebox{-0.5\height}{\drexellogobw}
+ \end{minipage}
+ \hfill
+ \begin{minipage}[c]{\tempskipb}
+% \end{macrocode}
+% Unlike |\newline| or |\\|, |\linebreak| justifies the current line
+% before requesting a newline.
+% \begin{macrocode}
+ \textbf{\Huge Office of Graduate Studies} \linebreak
+ \vskip 0.1\baselineskip
+% \end{macrocode}
+% The original form lacks the spaces around the slash (|/|), but
+% \LaTeX's font and kerning make the second line more compact in our
+% version. Allowing stretchy spaces around the slash helps the second
+% line look more balanced.
+% \begin{macrocode}
+ \textbf{\LARGE Dissertation / Thesis Approval Form} \linebreak
+ \end{minipage}
- \vskip0.25in
+ \vskip 2\baselineskip
- \noindent\begin{tabularx}{\hsize}{lX}
- \textbf{Dissertation/Thesis Title:} & \parbox[t]{\hsize}{\@DUT@title}\\
- &\\
- \textbf{Author:} & \@DUT@author
- \end{tabularx}
+ This form is for use by all doctoral and master's students with a
+ dissertation/thesis requirement. Please print clearly as the
+ library will bind a copy of this form with each copy of the
+ dissertation/thesis. All doctoral dissertations must conform to
+ university format requirements, which is the responsibility of the
+ student and supervising professor. Students should obtain a copy of
+ the Thesis Manual located on the library website.
\vspace*{\fill}
+% \end{macrocode}
+% Setup $\mbox{tempskipb} = \mbox{left column width}$ and
+% $\mbox{tempskipa} = \mbox{textwidth} - \mbox{tempskipb} -
+% \mbox{4em}$. The |4em| provides some buffer space between the
+% columns.
+% \begin{macrocode}
+ \settowidth{\tempskipb}{Dissertation/Thesis Title:}
+ \setlength{\tempskipa}{\textwidth}
+ \addtolength{\tempskipa}{-\tempskipb}
+ \addtolength{\tempskipa}{-4em}
+% \end{macrocode}
+% Double space the student-contolled section to allow plenty of space
+% for hand-written entries.
+% \begin{macrocode}
+ \begin{spacing}{2}
+ \begin{tabular*}{\textwidth}{@{\extracolsep{\fill}} l p{\tempskipa}}
+ \textbf{Dissertation/Thesis Title:} & \@DUT@title \\
+ \textbf{Author:} & \@DUT@author
+ \end{tabular*}
- \begin{center}
- \textbf{This dissertation/thesis is hereby accepted and approved.}
- \end{center}
+ \vspace*{\fill}
- \vspace*{\fill}
+ \begin{center}
+ \textbf{This dissertation/thesis is hereby accepted and approved.}
+ \end{center}
- \setstretch{1.05}
- \noindent \textbf{Signatures:}\\
- Examining Committee\\\ \\
- \begin{tabularx}{\hsize}{lX}
- \setbox0=\hbox{\textbf{Dissertation/Thesis Title:}}\hbox to \wd0{Chair\hfill} & \vbox{\hrule\hbox to \hsize{}}\\
- Members & \vbox{\hrule\hbox to \hsize{}}\\
- & \vbox{\hrule\hbox to \hsize{}}\\
- & \vbox{\hrule\hbox to \hsize{}}\\
- & \vbox{\hrule\hbox to \hsize{}}\\
- & \vbox{\hrule\hbox to \hsize{}}\\
- Academic Advisor & \vbox{\hrule\hbox to \hsize{}}\\
- Department Head & \vbox{\hrule\hbox to \hsize{}}
- \end{tabularx}
- \setstretch{1}
+ \vspace*{\fill}
- \vspace*{\fill}
+ \textbf{Signatures:} \\
+ Examining Committee \\
+% \end{macrocode}
+% The left most column is left blank and the stretchy space between
+% columns indents the middle column. I think this looks bad, but
+% that's how Drexel's version of the T-1 form looks.
+% \begin{macrocode}
+ \begin{tabular*}{\textwidth}{@{\extracolsep{\fill}} p{0pt} l p{\tempskipa}}
+ & Chair & \hrulefill \\
+ & Members & \hrulefill \\
+ & & \hrulefill \\
+ & & \hrulefill \\
+ & & \hrulefill \\
+ & & \hrulefill \\
+ & Academic Advisor & \hrulefill \\
+ & Department Head & \hrulefill
+ \end{tabular*}
+
+ \vspace*{\fill}
+ \end{spacing}
\begin{center}\scriptsize
- Office of Graduate Studies $\bullet$ 3141 Chestnut St. $\bullet$ Randell Hall 240 $\bullet$ Philadelphia, PA 19104\\
- \textbf{Tel.}: 215-895-0366 $\bullet$ \textbf{Fax}: 215-895-0495 $\bullet$ \textbf{Email}: \url{graduate@drexel.edu} $\bullet$ \textbf{Web}: \url{www.drexel.edu/provost/graduatestudies}
+ Office of Graduate Studies
+ $\bullet$ 3141 Chestnut St.
+ $\bullet$ Randell Hall 240
+ $\bullet$ Philadelphia, PA 19104 \\
+ \textbf{Tel.}: 215-895-0366
+ $\bullet$ \textbf{Fax}: 215-895-0495
+ $\bullet$ \textbf{Email}:
+ \href{mailto:graduate@drexel.edu}{graduate@drexel.edu}
+ $\bullet$ \textbf{Web}:
+ \href{http://www.drexel.edu/provost/graduatestudies/}{%
+ www.drexel.edu/provost/graduatestudies}
\end{center}
+ \endgroup
\pagebreak
}
% \end{macrocode}
% \changes{0.14}{2010/09/21}{Evan Sultanik added macro.}
% \begin{macrocode}
\newcommand\drexellogobw{
- \begin{tikzpicture}[y=0.80pt, x=0.8pt,yscale=-1, inner sep=0pt, outer sep=0pt]
+ \begin{tikzpicture}[y=0.8pt, x=0.8pt,yscale=-1, inner sep=0pt, outer sep=0pt]
\begin{scope}[cm={{1.25,0.0,0.0,-1.25,(-332.5,550.73629)}},]
\path[fill=black,nonzero rule] (266.0000,367.4100) -- (338.0000,367.4100) --
(338.0000,440.5890) -- (266.0000,440.5890) -- (266.0000,367.4100) -- cycle;
% \ref{sec:hypcap-inclusion}).
%
%
-% \subsubsection{\pkg{tabularx}}
-% \label{sec:tabularx}
-%
-% \href{http://www.ctan.org/tex-archive/help/Catalogue/entries/tabularx.html}{\pkg{tabularx}}
-% for tabular environments with auto-sized columns. This package is
-% currently only required for the \texttt{approvalform} option (it is
-% used in typesetting the approval form).
-% \begin{macrocode}
-\if@approvalform\RequirePackage{tabularx}\fi
-% \end{macrocode}
-%
-%
% \subsubsection{\pkg{tikz}}
% \label{sec:tikz}
%
% \href{http://sourceforge.net/projects/pgf/}{\pkg{tikz}}
-% for vector drawing natively in \TeX. This package is
-% currently only required for the \texttt{approvalform} option (it is
-% used in drawing the Drexel logo on the approval form).
+% for vector drawing natively in \TeX. This package is currently only
+% required for the \Lopt{approvalform} option (it is used in drawing
+% the Drexel logo on the approval form).
% \begin{macrocode}
\if@approvalform\RequirePackage{tikz}\fi
% \end{macrocode}
% (\file{classes.dtx}, L1796)
% \begin{macrocode}
\newcommand\@DUT@maketitle{
- \if@approvalform
- \ifpdf
- \pdfbookmark[-1]{Approval Form}{Approval Form}
- \fi
- \makeapprovalform
- \fi
\begin{@DUT@titlepage}%
% \end{macrocode}
% Add some bookmarks if we're using pdf\LaTeX. The |frontmatter|
\cleardoublepage
\@mainmatterfalse
\pagenumbering{roman}
+ \if@approvalform
+ \ifpdf
+ \pdfbookmark[-1]{Approval Form}{Approval Form}
+ \fi
+ \DUT@makeapprovalform
+ \fi
% \end{macrocode}
% From Manual \S 3.1 p8, ``Title Page''.
% \begin{macrocode}
% \item redefine |\thesection| to produce alphabetic appendix
% numbers. This redefinition is done globally to ensure that it
% survives even if |\appendix| is issued within an environment such
-% as \texttt{multicols}.
+% as |multicols|.
% \end{itemize}
%
% In addition to \cls{book}'s (or \pkg{hyperref}'s) activity, we
% \begin{macrocode}
%<*example|example-draft>
%% See drexel-thesis.pdf for details.
-%<example>\documentclass[subfig,blackref]{drexel-thesis}
+%<example>\documentclass[subfig,blackref,approvalform]{drexel-thesis}
%<example-draft>\documentclass[draft,subfig]{drexel-thesis}
%% Enter the appropriate information here
projects / drexel-thesis.git / commitdiff