+++ /dev/null
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.2.7-r1.ebuild,v 1.5 2010/03/06 20:23:15 robbat2 Exp $
-
-inherit eutils linux-info perl-module python multilib
-
-DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
-HOMEPAGE="http://g15daemon.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ppc ppc64 x86"
-IUSE="perl python"
-
-DEPEND="=virtual/libusb-0*
- dev-libs/libdaemon
- >=dev-libs/libg15-1.2.0
- perl? ( >=dev-perl/Inline-0.4 )
- python? ( dev-lang/python )"
-
-RDEPEND="${DEPEND}
- perl? ( dev-perl/GDGraph )"
-
-uinput_check() {
- ebegin "Checking for uinput support"
- local rc=1
- linux_config_exists && linux_chkconfig_present INPUT_UINPUT
- rc=$?
-
- if [[ $rc -ne 0 ]] ; then
- eerror "To use g15daemon, you need to compile your kernel with uinput support."
- eerror "Please enable uinput support in your kernel config, found at:"
- eerror
- eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
- eerror
- eerror "Once enabled, you should have the /dev/input/uinput device."
- eerror "g15daemon will not work without the uinput device."
- fi
-}
-
-pkg_setup() {
- linux-info_pkg_setup
- uinput_check
-}
-
-src_unpack() {
- unpack ${A}
- if use perl; then
- unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
- fi
- if use python; then
- unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
- fi
-}
-
-src_compile() {
- econf || die "configure failed"
-
- emake || die "make failed"
-
- if use perl; then
- cd "${WORKDIR}/G15Daemon-0.2"
- perl-module_src_compile
- fi
-}
-
-src_install() {
- emake DESTDIR="${D}" \
- docdir=/usr/share/doc/${PF} install || die "make install failed"
-
- # remove odd docs installed my make
- rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage}
-
- insinto /usr/share/${PN}/contrib
- doins contrib/xmodmaprc
- doins contrib/xmodmap.sh
- if use perl; then
- doins contrib/testbindings.pl
- fi
-
- newconfd "${FILESDIR}/${P}.confd" ${PN}
- newinitd "${FILESDIR}/${PF}.initd" ${PN}
-
- if use perl; then
- ebegin "Installing Perl Bindings (G15Daemon.pm)"
- cd "${WORKDIR}/G15Daemon-0.2"
- docinto perl
- perl-module_src_install
- fi
-
- if use python; then
- ebegin "Installing Python Bindings (g15daemon.py)"
- cd "${WORKDIR}/pyg15daemon"
- python_version
-
- insinto /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
- doins g15daemon.py
- docinto python
- dodoc AUTHORS
- fi
-
- prepalldocs
-}
-
-pkg_postinst() {
- if use python; then
- python_version
- python_mod_optimize /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
- echo ""
- fi
-
- elog "To use g15daemon, you need to add g15daemon to the default runlevel."
- elog "This can be done with:"
- elog "# /sbin/rc-update add g15daemon default"
- elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
- elog ""
- elog "To have all new keys working in X11, you'll need create a "
- elog "specific xmodmap in your home directory or edit the existent one."
- elog ""
- elog "Create the xmodmap:"
- elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
- elog ""
- elog "Adding keycodes to an existing xmodmap:"
- elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
-}
-
-pkg_postrm() {
- if use python; then
- python_mod_cleanup "/usr/$(get_libdir)/python*/site-packages/g15daemon"
- fi
-}
+++ /dev/null
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.9.5.3-r2.ebuild,v 1.5 2010/03/06 20:23:15 robbat2 Exp $
-
-EAPI=2
-
-inherit eutils linux-info perl-module python multilib base
-
-DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
-HOMEPAGE="http://g15daemon.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~ppc ~ppc64 x86"
-IUSE="perl python"
-
-DEPEND="=virtual/libusb-0*
- >=dev-libs/libg15-1.2.4
- >=dev-libs/libg15render-1.2
- perl? ( >=dev-perl/Inline-0.4 )
- python? ( dev-lang/python )"
-
-RDEPEND="${DEPEND}
- perl? ( dev-perl/GDGraph )"
-
-PATCHES=( "${FILESDIR}/${P}-forgotten-open-mode.patch" )
-uinput_check() {
- ebegin "Checking for uinput support"
- local rc=1
- linux_config_exists && linux_chkconfig_present INPUT_UINPUT
- rc=$?
-
- if [[ $rc -ne 0 ]] ; then
- eerror "To use g15daemon, you need to compile your kernel with uinput support."
- eerror "Please enable uinput support in your kernel config, found at:"
- eerror
- eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
- eerror
- eerror "Once enabled, you should have the /dev/input/uinput device."
- eerror "g15daemon will not work without the uinput device."
- fi
-}
-
-pkg_setup() {
- linux-info_pkg_setup
- uinput_check
-}
-
-src_unpack() {
- unpack ${A}
- if use perl; then
- unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
- fi
- if use python; then
- unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
- fi
-}
-
-src_compile() {
- emake || die "make failed"
-
- if use perl; then
- cd "${WORKDIR}/G15Daemon-0.2"
- perl-module_src_compile
- fi
-}
-
-src_install() {
- emake DESTDIR="${D}" \
- docdir=/usr/share/doc/${PF} install || die "make install failed"
-
- # remove odd docs installed my make
- rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage}
-
- insinto /usr/share/${PN}/contrib
- doins contrib/xmodmaprc
- doins contrib/xmodmap.sh
- if use perl; then
- doins contrib/testbindings.pl
- fi
-
- newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
- newinitd "${FILESDIR}/${PN}-1.2.7-r2.initd" ${PN}
- dobin "${FILESDIR}/g15daemon-hotplug"
- insinto /etc/udev/rules.d
- doins "${FILESDIR}/99-g15daemon.rules"
-
- insinto /etc
- doins "${FILESDIR}"/g15daemon.conf
-
- if use perl; then
- ebegin "Installing Perl Bindings (G15Daemon.pm)"
- cd "${WORKDIR}/G15Daemon-0.2"
- docinto perl
- perl-module_src_install
- fi
-
- if use python; then
- ebegin "Installing Python Bindings (g15daemon.py)"
- cd "${WORKDIR}/pyg15daemon"
- python_version
-
- insinto /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
- doins g15daemon.py
-
- docinto python
- dodoc AUTHORS
- fi
-}
-
-pkg_postinst() {
- if use python; then
- python_version
- python_mod_optimize /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
- echo ""
- fi
-
- elog "To use g15daemon, you need to add g15daemon to the default runlevel."
- elog "This can be done with:"
- elog "# /sbin/rc-update add g15daemon default"
- elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
- elog ""
- elog "To have all new keys working in X11, you'll need create a "
- elog "specific xmodmap in your home directory or edit the existent one."
- elog ""
- elog "Create the xmodmap:"
- elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
- elog ""
- elog "Adding keycodes to an existing xmodmap:"
- elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
-}
-
-pkg_postrm() {
- if use python; then
- python_mod_cleanup "/usr/$(get_libdir)/python*/site-packages/g15daemon"
- fi
-}
projects / gentoo.git / commitdiff