--- /dev/null
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+populate_udev() {
+ # populate /dev with devices already found by the kernel
+
+ # tell modprobe.sh to be verbose to $CONSOLE
+ echo CONSOLE=${CONSOLE} > /dev/.udev_populate
+
+ if get_bootparam "nocoldplug" ; then
+ RC_COLDPLUG="no"
+ ewarn "Skipping udev coldplug as requested in kernel cmdline"
+ fi
+
+ if [ $(get_KV) -gt $(KV_to_int '2.6.14') ] ; then
+ ebegin "Populating /dev with existing devices through uevents"
+ local opts=
+ [ ${RC_COLDPLUG} != "yes" ] && opts="--attr-match=dev"
+ /sbin/udevtrigger ${opts}
+ eend $?
+ else
+ ebegin "Populating /dev with existing devices with udevstart"
+ /sbin/udevstart
+ eend $?
+ fi
+
+ # loop until everything is finished
+ # there's gotta be a better way...
+ ebegin "Letting udev process events"
+ /sbin/udevsettle --timeout=60
+ eend $?
+
+ rm -f /dev/.udev_populate
+ return 0
+}
+
+seed_dev() {
+ # Seed /dev with some things that we know we need
+ ebegin "Seeding /dev with needed nodes"
+
+ # if /dev/console is missing on root-partition,
+ # kernel could not open it and we need to do that for
+ # udevd (Bug #151414)
+ [ ! -c /dev/console ] && mknod /dev/console c 5 1
+
+ # creating /dev/tty1 as it is used by bootsplash
+ # (to allow us to write to $CONSOLE before udev has
+ # created it)
+ [ ! -c /dev/tty1 ] && mknod /dev/tty1 c 4 1
+
+ # udevd will dup its stdin/stdout/stderr to /dev/null
+ # and we do not want a file which gets buffered in ram
+ [ ! -c /dev/null ] && mknod /dev/null c 1 3
+
+ # copy over any persistant things
+ if [ -d /lib/udev/devices ] ; then
+ cp --preserve=all --recursive --update /lib/udev/devices/* /dev 2>/dev/null
+ fi
+
+ # Not provided by sysfs but needed
+ ln -snf /proc/self/fd /dev/fd
+ ln -snf fd/0 /dev/stdin
+ ln -snf fd/1 /dev/stdout
+ ln -snf fd/2 /dev/stderr
+ [ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
+
+ # Create problematic directories
+ mkdir -p /dev/pts /dev/shm
+ eend 0
+}
+
+main() {
+ # check if /dev/console exists outside tmpfs
+ [ -c /dev/console ] ; local need_redirect=$?
+
+ # Setup temporary storage for /dev
+ ebegin "Mounting /dev for udev"
+ if [ "${RC_USE_FSTAB}" = "yes" ] ; then
+ mntcmd=$(get_mount_fstab /dev)
+ else
+ unset mntcmd
+ fi
+ if [ -n "${mntcmd}" ] ; then
+ try mount -n ${mntcmd}
+ else
+ if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems ; then
+ mntcmd="tmpfs"
+ else
+ mntcmd="ramfs"
+ fi
+ # many video drivers require exec access in /dev #92921
+ try mount -n -t "${mntcmd}" -o exec,nosuid,mode=0755 udev /dev
+ fi
+ eend $?
+
+ # Create a file so that our rc system knows it's still in sysinit.
+ # Existance means init scripts will not directly run.
+ # rc will remove the file when done with sysinit.
+ touch /dev/.rcsysinit
+
+ # Selinux lovin; /selinux should be mounted by selinux-patched init
+ if [ -x /sbin/restorecon ] && [ -c /selinux/null ] ; then
+ restorecon /dev > /selinux/null
+ fi
+
+ # Actually get udev rolling
+ if [ "${RC_DEVICE_TARBALL}" = "yes" ] && \
+ [ -s /lib/udev/state/devices.tar.bz2 ] ; then
+ ebegin "Populating /dev with saved device nodes"
+ try tar -jxpf /lib/udev/state/devices.tar.bz2 -C /dev
+ eend $?
+ fi
+
+ seed_dev
+
+ # Setup hotplugging (if possible)
+ if [ -e /proc/sys/kernel/hotplug ] ; then
+ ebegin "Setting up proper hotplug agent"
+ eindent
+ if [ $(get_KV) -gt $(KV_to_int '2.6.14') ] ; then
+ einfo "Using netlink for hotplug events..."
+ echo "" > /proc/sys/kernel/hotplug
+ else
+ einfo "Setting /sbin/udevsend as hotplug agent ..."
+ echo "/sbin/udevsend" > /proc/sys/kernel/hotplug
+ fi
+ eoutdent
+ eend 0
+ fi
+
+ ebegin "Starting udevd"
+ if [ ${need_redirect} -eq 1 ]; then
+ # we need to open fds 0 1 2 to solve Bug #151414
+ /sbin/udevd --daemon </dev/console >/dev/console 2>/dev/console
+ else
+ /sbin/udevd --daemon
+ fi
+ eend $?
+
+ populate_udev
+
+ # Create nodes that udev can't
+ ebegin "Finalizing udev configuration"
+ [ -x /sbin/dmsetup ] && /sbin/dmsetup mknodes &>/dev/null
+ [ -x /sbin/lvm ] && \
+ /sbin/lvm vgscan -P --mknodes --ignorelockingfailure &>/dev/null
+ # Running evms_activate on a LiveCD causes lots of headaches
+ [ -z "${CDBOOT}" ] && [ -x /sbin/evms_activate ] && \
+ /sbin/evms_activate -q &>/dev/null
+ eend 0
+}
+
+main
+
+# vim:ts=4
--- /dev/null
+# /etc/udev/rules/50-udev.rules: device naming rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields. See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+# Net devices can have arbitrary names, even
+# ones set by the user. Not try to match normal
+# rules on net devices (Bug #166652)
+SUBSYSTEM=="net", GOTO="gentoo_device_rules_end"
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcs*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="vcsa*", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty", NAME="%k", GROUP="tty", MODE="0666", OPTIONS="last_rule"
+KERNEL=="tty[0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]", NAME="%k", GROUP="tty", OPTIONS="last_rule"
+KERNEL=="console", NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx", NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*", NAME="%k", SYMLINK="tts/%n", GROUP="uucp", MODE="0660"
+KERNEL=="ttyUSB[0-9]*", NAME="%k", SYMLINK="tts/USB%n", GROUP="uucp", MODE="0660"
+KERNEL=="ippp0", NAME="%k", GROUP="uucp", MODE="0660"
+KERNEL=="isdn*" NAME="%k", GROUP="uucp", MODE="0660"
+KERNEL=="dcbri*", NAME="%k", GROUP="uucp", MODE="0660"
+KERNEL=="ircomm*", NAME="%k", GROUP="uucp", MODE="0660"
+
+# all block devices
+SUBSYSTEM=="block", GROUP="disk"
+
+# cdrom symlinks and other good cdrom naming
+KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", ACTION=="add", IMPORT{program}="cdrom_id --export $tempnode"
+ENV{ID_CDROM}=="?*", GROUP="cdrom"
+
+# assign cdrom-permission also to associated generic device (for cd-burning ...)
+KERNEL=="sg[0-9]*", ACTION=="add", ATTRS{type}=="4|5", GROUP="cdrom"
+
+# disk devices
+KERNEL=="sd*", NAME="%k", GROUP="disk"
+KERNEL=="dasd*", NAME="%k", GROUP="disk"
+KERNEL=="ataraid*", NAME="%k", GROUP="disk"
+
+# compaq smart array
+KERNEL=="cciss*", NAME="%k"
+KERNEL=="ida*", NAME="%k"
+
+# mylex
+KERNEL=="rd*", NAME="%k"
+
+# dri devices
+KERNEL=="card*", NAME="dri/card%n", GROUP="video"
+KERNEL=="nvidia*", NAME="%k", GROUP="video"
+KERNEL=="3dfx*", NAME="%k", GROUP="video"
+
+# alsa devices
+SUBSYSTEM=="sound", GROUP="audio"
+KERNEL=="controlC[0-9]*", NAME="snd/%k"
+KERNEL=="hw[CD0-9]*", NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
+KERNEL=="midiC[D0-9]*", NAME="snd/%k"
+KERNEL=="timer", NAME="snd/%k"
+KERNEL=="seq", NAME="snd/%k"
+
+# capi devices
+KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20", GROUP="uucp", MODE="0660"
+KERNEL=="capi*", NAME="capi/%n", GROUP="uucp", MODE="0660"
+
+# cpu devices
+KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid"
+KERNEL=="msr[0-9]*", NAME="cpu/%n/msr"
+KERNEL=="microcode", NAME="cpu/microcode"
+
+# dm devices
+# lookup device name and create device in /dev/mapper
+# use dmsetup, until devmap_name is provided by sys-fs/device-mapper
+ACTION=="add", SUBSYSTEM=="block", KERNEL=="dm-*", \
+ PROGRAM="/sbin/dmsetup -j %M -m %m --noopencount --noheadings -c -o name info", \
+ NAME="mapper/%c"
+KERNEL=="device-mapper", NAME="mapper/control"
+
+# fb devices
+KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# floppy devices
+KERNEL=="fd[0-9]*", NAME="floppy/%k", SYMLINK+="%k", GROUP="floppy"
+KERNEL=="fd[0-9]*", ACTION=="add", ATTRS{cmos}=="*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/floppy/%k"
+KERNEL=="fd[0-9]*", ACTION=="remove", RUN+="/bin/sh -c 'rm -f $root/floppy/%k?*'"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice", NAME="input/%k", MODE="0644"
+KERNEL=="mouse*", NAME="input/%k", MODE="0644"
+KERNEL=="event*", NAME="input/%k", MODE="0600"
+KERNEL=="js*", NAME="input/%k", MODE="664"
+KERNEL=="ts*", NAME="input/%k", MODE="0600"
+
+# loop devices
+KERNEL=="loop[0-9]*", NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
+
+# md block devices
+KERNEL=="md[0-9]*", NAME="md/%n", SYMLINK+="%k", GROUP="disk"
+
+# aoe char devices,
+SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# misc devices
+KERNEL=="agpgart", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="psaux", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="rtc", NAME="misc/%k", SYMLINK+="%k", MODE="0664"
+KERNEL=="uinput", NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="inotify", NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# netlink devices
+KERNEL=="route", NAME="netlink/%k"
+KERNEL=="skip", NAME="netlink/%k"
+KERNEL=="usersock", NAME="netlink/%k"
+KERNEL=="fwmonitor", NAME="netlink/%k"
+KERNEL=="tcpdiag", NAME="netlink/%k"
+KERNEL=="nflog", NAME="netlink/%k"
+KERNEL=="xfrm", NAME="netlink/%k"
+KERNEL=="arpd", NAME="netlink/%k"
+KERNEL=="route6", NAME="netlink/%k"
+KERNEL=="ip6_fw", NAME="netlink/%k"
+KERNEL=="dnrtmsg", NAME="netlink/%k"
+KERNEL=="tap*", NAME="netlink/%k"
+
+# network devices
+KERNEL=="tun", NAME="net/%k", MODE="0600"
+
+# ramdisk devices
+KERNEL=="ram[0-9]*", NAME="rd/%n", SYMLINK+="%k"
+
+# IEEE1394 (firewire) devices (must be before raw devices below)
+KERNEL=="raw1394", NAME="%k", GROUP="video"
+KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video"
+KERNEL=="video1394*", NAME="video1394/%n", GROUP="video"
+
+# raw devices
+SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk"
+KERNEL=="ram*", NAME="%k", GROUP="disk"
+
+# sound devices
+KERNEL=="adsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="adsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer[0-9]*", NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+
+# memory devices
+KERNEL=="random", NAME="%k", MODE="0666"
+KERNEL=="urandom", NAME="%k", MODE="0444"
+KERNEL=="mem", NAME="%k", MODE="0640"
+KERNEL=="kmem", NAME="%k", MODE="0640"
+KERNEL=="port", NAME="%k", MODE="0640"
+KERNEL=="full", NAME="%k", MODE="0666"
+KERNEL=="null", NAME="%k", MODE="0666"
+KERNEL=="zero", NAME="%k", MODE="0666"
+
+# usb devices
+KERNEL=="hiddev*", NAME="usb/%k"
+KERNEL=="auer*", NAME="usb/%k"
+KERNEL=="legousbtower*", NAME="usb/%k", GROUP="usb"
+KERNEL=="dabusb*", NAME="usb/%k"
+BUS=="usb", KERNEL=="lp[0-9]*", NAME="usb/%k", GROUP="lp"
+
+# v4l devices
+KERNEL=="video[0-9]*", NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
+KERNEL=="radio[0-9]*", NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="vbi[0-9]*", NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
+KERNEL=="vtx[0-9]*", NAME="v4l/vtx%n", GROUP="video"
+
+# dvb devices
+SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+
+# Asterisk Zaptel devices
+KERNEL=="zapctl", NAME="zap/ctl"
+KERNEL=="zaptimer", NAME="zap/timer"
+KERNEL=="zapchannel", NAME="zap/channel"
+KERNEL=="zappseudo", NAME="zap/pseudo"
+KERNEL=="zap[0-9]*", NAME="zap/%n"
+
+# pilot/palm devices
+KERNEL=="pilot", NAME="%k", GROUP="uucp"
+
+# jaz devices
+KERNEL=="jaz*", NAME="%k", GROUP="disk"
+
+# zip devices
+KERNEL=="pocketzip*", NAME="%k", GROUP="disk"
+KERNEL=="zip*", NAME="%k", GROUP="disk"
+
+# ls120 devices
+KERNEL=="ls120", NAME="%k", GROUP="disk"
+
+# lp devices
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="irlpt", NAME="%k", GROUP="lp"
+KERNEL=="usblp", NAME="%k", GROUP="lp"
+KERNEL=="lp*", NAME="%k", GROUP="lp"
+KERNEL=="parport*", NAME="%k", GROUP="lp"
+
+# tape devices
+KERNEL=="ht*", NAME="%k", GROUP="tape"
+KERNEL=="nht*", NAME="%k", GROUP="tape"
+KERNEL=="pt*", NAME="%k", GROUP="tape"
+KERNEL=="npt*", NAME="%k", GROUP="tape"
+KERNEL=="st*", NAME="%k", GROUP="tape"
+KERNEL=="nst*", NAME="%k", GROUP="tape"
+KERNEL=="osst*", NAME="%k", GROUP="tape"
+KERNEL=="nosst*", NAME="%k", GROUP="tape"
+
+# diskonkey devices
+KERNEL=="diskonkey*", NAME="%k", GROUP="disk"
+
+# rem_ide devices
+KERNEL=="microdrive*", NAME="%k", GROUP="disk"
+
+# kbd devices
+KERNEL=="kbd", NAME="%k", MODE="0664"
+
+# Sony Vaio Jogdial sonypi device
+KERNEL=="sonypi", NAME="%k", MODE="0666"
+
+# packet devices
+KERNEL=="pktcdvd", NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
+KERNEL=="pktcdvd[0-9]*", NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
+
+# infiniband devices
+KERNEL=="umad*", NAME="infiniband/%k"
+KERNEL=="issm*", NAME="infiniband/%k"
+
+
+# usbfs-like device nodes
+SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="usb", MODE="0664"
+
+
+# Setting timeout for tape-devices to 900 seconds
+# if you need timeouts for other devices add a similar rule
+# with correct type-value, or open a bug on bugs.gentoo.org.
+ACTION=="add", SUBSYSTEM=="scsi" , ATTRS{type}=="1", \
+ RUN+="/bin/sh -c 'echo 900 > /sys$$DEVPATH/timeout'"
+
+
+# Module autoloading
+ACTION!="add", GOTO="hotplug_no_add_event"
+
+# check if the device has already been claimed by a driver
+ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"
+
+# this driver is broken and should not be loaded automatically
+SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"
+
+# Autoload modules that lack aliases but have them defined inutoload modules
+ENV{MODALIAS}=="?*", RUN+="modprobe.sh $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
+# If you have problems with some pnp modules being loaded, please enter the
+# following aliases into the modprobe configuration files. These are needed by
+# udev to autoload some modules
+# alias pnp:dPNP0510 irtty-sir
+# alias pnp:dPNP0511 irtty-sir
+# alias pnp:dPNP0700 floppy
+# alias pnp:dPNP0800 pcspkr
+# alias pnp:dPNP0b00 rtc
+# alias pnp:dPNP0303 atkbd
+# alias pnp:dPNP0f13 psmouse
+# alias pnp:dPNPb02f analog
+
+
+SUBSYSTEM=="i2o", RUN+="modprobe.sh i2o_block"
+SUBSYSTEM=="mmc", RUN+="modprobe.sh mmc_block"
+
+# Parts taken from redhat-rules
+# sd: 0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
+# sr: 4 TYPE_WORM, 5 TYPE_ROM
+# st/osst: 1 TYPE_TAPE
+
+# Load driver for scsi-device
+SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"
+ATTRS{type}=="?*", RUN+="modprobe.sh sg"
+ATTRS{type}=="0|7|14", RUN+="modprobe.sh sd_mod"
+ATTRS{type}=="4|5", RUN+="modprobe.sh sr_mod"
+ATTRS{type}=="8", RUN+="modprobe.sh ch"
+
+ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st"
+ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
+ ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst"
+ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="modprobe.sh $env{ID_SCSI_TAPE_DRIVER}"
+LABEL="hotplug_scsi_end"
+
+
+SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"
+
+LABEL="hotplug_load_end"
+
+
+# Load firmware
+SUBSYSTEM=="firmware", RUN+="firmware.sh"
+
+LABEL="hotplug_no_add_event"
+
+LABEL="gentoo_device_rules_end"
+
+# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
+# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
+#ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
+
+# always run /etc/dev.d/ stuff for now.
+RUN+="udev_run_devd $env{SUBSYSTEM}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
--- /dev/null
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-106-r2.ebuild,v 1.1 2007/03/12 14:52:16 zzam Exp $
+
+inherit eutils flag-o-matic multilib toolchain-funcs
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="selinux"
+
+DEPEND="selinux? ( sys-libs/libselinux )"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+ >=sys-apps/baselayout-1.12.5"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+ unpack ${A}
+
+ cd "${S}"
+
+ # patches go here...
+ #epatch ${FILESDIR}/${P}-udev_volume_id.patch
+ epatch ${FILESDIR}/${PN}-104-peristent-net-disable-xen.patch
+ epatch ${FILESDIR}/${P}-floppy-devices-no-umask.diff
+
+ # No need to clutter the logs ...
+ sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+ # Do not use optimization flags from the package
+ sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+ # Make sure there is no sudden changes to udev.rules.gentoo
+ # (more for my own needs than anything else ...)
+ MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+ MD5=${MD5/ -/}
+ if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
+ then
+ echo
+ eerror "gentoo/udev.rules has been updated, please validate!"
+ die "gentoo/udev.rules has been updated, please validate!"
+ fi
+}
+
+src_compile() {
+ filter-flags -fprefetch-loop-arrays
+ local myconf=
+ local extras="extras/ata_id \
+ extras/cdrom_id \
+ extras/dasd_id \
+ extras/edd_id \
+ extras/firmware \
+ extras/floppy \
+ extras/path_id \
+ extras/run_directory \
+ extras/scsi_id \
+ extras/usb_id \
+ extras/volume_id \
+ extras/rule_generator"
+
+ use selinux && myconf="${myconf} USE_SELINUX=true"
+
+ # Not everyone has full $CHOST-{ld,ar,etc...} yet
+ local mycross=""
+ type -p ${CHOST}-ar && mycross=${CHOST}-
+
+ echo "get_libdir = $(get_libdir)"
+ # Do not work with emake
+ make \
+ EXTRAS="${extras}" \
+ udevdir="/dev/" \
+ CROSS_COMPILE=${mycross} \
+ ${myconf} || die
+}
+
+src_install() {
+ # we install everything by "hand" and don't rely on the udev Makefile to do
+ # it for us (why? it's easier that way...)
+ dobin udevinfo || die "Required binary not installed properly"
+ dobin udevtest || die "Required binary not installed properly"
+ dobin udevmonitor || die "Required binary not installed properly"
+ into /
+ dosbin udevd || die "Required binary not installed properly"
+ dosbin udevstart || die "Required binary not installed properly"
+ dosbin udevtrigger || die "Required binary not installed properly"
+ dosbin udevcontrol || die "Required binary not installed properly"
+ dosbin udevsettle || die "Required binary not installed properly"
+
+ # Helpers
+ exeinto /lib/udev
+ doexe extras/run_directory/udev_run_devd || die "Required helper not installed properly"
+ doexe extras/run_directory/udev_run_hotplugd || die "Required helper not installed properly"
+ doexe extras/ata_id/ata_id || die "Required helper not installed properly"
+ doexe extras/volume_id/vol_id || die "Required helper not installed properly"
+ doexe extras/scsi_id/scsi_id || die "Required helper not installed properly"
+ doexe extras/usb_id/usb_id || die "Required helper not installed properly"
+ doexe extras/path_id/path_id || die "Required helper not installed properly"
+ doexe extras/cdrom_id/cdrom_id || die "Required helper not installed properly"
+ doexe extras/dasd_id/dasd_id || die "Required helper not installed properly"
+ doexe extras/edd_id/edd_id || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_cd_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/write_net_rules || die "Required helper not installed properly"
+ doexe extras/rule_generator/rule_generator.functions || die "Required helper not installed properly"
+ keepdir /lib/udev/state
+ keepdir /lib/udev/devices
+
+ # vol_id library (needed by mount and HAL)
+ dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+ # move the .a files to /usr/lib
+ dodir /usr/$(get_libdir)
+ mv -f "${D}"/$(get_libdir)/*.a "${D}"/usr/$(get_libdir)/
+
+ # handle static linking bug #4411
+ gen_usr_ldscript libvolume_id.so
+
+ # save pkgconfig info
+ insinto /usr/$(get_libdir)/pkgconfig
+ doins extras/volume_id/lib/*.pc
+
+ #exeinto /etc/udev/scripts
+ exeinto /lib/udev
+ #doexe extras/ide-devfs.sh
+ #doexe extras/scsi-devfs.sh
+ #doexe extras/raid-devfs.sh
+ doexe extras/floppy/create_floppy_devices || die "Required binary not installed properly"
+ doexe extras/firmware/firmware.sh || die "Required binary not installed properly"
+ newexe ${FILESDIR}/net-104-r10.sh net.sh || die "Required binary not installed properly"
+ newexe ${FILESDIR}/modprobe-105.sh modprobe.sh || die "Required binary not installed properly"
+ doexe ${FILESDIR}/seq_node.sh || die "Required binary not installed properly"
+
+ # Our udev config file
+ insinto /etc/udev
+ newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+ # Our rules files
+ insinto /etc/udev/rules.d/
+ newins etc/udev/gentoo/udev.rules 50-udev.rules
+ newins ${FILESDIR}/udev.rules-106-r2 50-udev.rules
+ newins ${FILESDIR}/05-udev-early.rules-104-r5 05-udev-early.rules
+ doins ${FILESDIR}/95-net.rules
+ # Use upstream's persistent rules for devices
+ doins etc/udev/rules.d/60-*.rules
+ doins extras/rule_generator/75-*.rules || die "rules not installed properly"
+
+ # scsi_id configuration
+ insinto /etc
+ doins extras/scsi_id/scsi_id.config
+
+ # set up the /etc/dev.d directory tree
+ keepdir /etc/dev.d
+
+ # all of the man pages
+ doman *.7
+ doman *.8
+ doman extras/ata_id/ata_id.8
+ doman extras/edd_id/edd_id.8
+ doman extras/scsi_id/scsi_id.8
+ doman extras/volume_id/vol_id.8
+ doman extras/dasd_id/dasd_id.8
+ doman extras/cdrom_id/cdrom_id.8
+ # create a extra symlink for udevcontrol
+ dosym udevd.8 /usr/share/man/man8/udevcontrol.8
+
+ # our udev hooks into the rc system
+ insinto /lib/rcscripts/addons
+ newins "${FILESDIR}"/udev-start-106-r2.sh udev-start.sh
+ newins "${FILESDIR}"/udev-stop-105.sh udev-stop.sh
+
+ # needed to compile latest Hal
+ insinto /usr/include
+ doins extras/volume_id/lib/libvolume_id.h
+
+ dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+ dodoc docs/{overview,udev_vs_devfs}
+ dodoc docs/writing_udev_rules/*
+
+ newdoc extras/volume_id/README README_volume_id
+
+ if use s390; then
+ # s390 does not has persistent mac addresses
+ # and we only have persistence rules for mac.
+ # For now just remove the rules file.
+ rm ${D}/etc/udev/rules.d/75-persistent-net-generator.rules
+ fi
+
+}
+
+pkg_preinst() {
+ if [[ -d ${ROOT}/lib/udev-state ]] ; then
+ mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+ rm -r "${ROOT}"/lib/udev-state
+ fi
+
+ if [ -f "${ROOT}/etc/udev/udev.config" -a \
+ ! -f "${ROOT}/etc/udev/udev.rules" ]
+ then
+ mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+ fi
+
+ # delete the old udev.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+ fi
+
+ # delete the old wait_for_sysfs.hotplug symlink if it is present
+ if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
+ then
+ rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
+ fi
+
+ # is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+ coldplug_stale=""
+ if [ -f "${ROOT}/etc/init.d/coldplug" ]
+ then
+ coldplug_stale="1"
+ fi
+}
+
+pkg_postinst() {
+ if [[ ${ROOT} == "/" ]] ; then
+ # check if root of init-process is identical to ours
+ if [ -r /proc/1/root -a /proc/1/root/ -ef /proc/self/root/ ]; then
+ einfo "restarting udevd now."
+ if [[ -n $(pidof udevd) ]] ; then
+ killall -15 udevd &>/dev/null
+ sleep 1
+ killall -9 udevd &>/dev/null
+ fi
+ /sbin/udevd --daemon
+ fi
+ fi
+
+ # people want reminders, I'll give them reminders. Odds are they will
+ # just ignore them anyway...
+
+ if [[ ${coldplug_stale} == "1" ]] ; then
+ ewarn "A stale coldplug init script found. You should run:"
+ ewarn
+ ewarn " rc-update del coldplug"
+ ewarn " rm -f /etc/init.d/coldplug"
+ ewarn
+ ewarn "udev now provides its own coldplug functionality."
+ fi
+
+ # delete 40-scsi-hotplug.rules - all integrated in 50-udev.rules
+ if has_version "=sys-fs/udev-103-r3"; then
+ if [[ -e "${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules" ]]
+ then
+ ewarn "Deleting stray 40-scsi-hotplug.rules"
+ ewarn "installed by sys-fs/udev-103-r3"
+ rm -f ${ROOT}/etc/udev/rules.d/40-scsi-hotplug.rules
+ fi
+ fi
+
+ # Removing some device-nodes we thought we need some time ago
+ if [[ -d "${ROOT}"/lib/udev/devices ]]; then
+ rm -f "${ROOT}"/lib/udev/devices/{null,zero,console,urandom}
+ fi
+
+ # Removing some old file
+ if has_version "<sys-fs/udev-104-r5"; then
+ rm -f "${ROOT}"/etc/dev.d/net/hotplug.dev
+ rmdir --ignore-fail-on-non-empty "${ROOT}"/etc/dev.d/net
+ fi
+
+ einfo
+ einfo "For more information on udev on Gentoo, writing udev rules, and"
+ einfo " fixing known issues visit:"
+ einfo " http://www.gentoo.org/doc/en/udev-guide.xml"
+}
projects / gentoo.git / commitdiff