X-Git-Url: http://git.tremily.us/?a=blobdiff_plain;f=drexel-thesis.dtx;h=b3d470d3273cf2474a3111dc4564d384f8eff6e2;hb=c0649e9e8778aad83f79dae66a2713309d569866;hp=666aaefc8dc0b2753f9012457b8e194dfb3cc7c9;hpb=12ee6441cd6cc9df8822760fc49d2626470b6fcf;p=drexel-thesis.git

diff --git a/drexel-thesis.dtx b/drexel-thesis.dtx
index 666aaef..b3d470d 100644
--- a/drexel-thesis.dtx
+++ b/drexel-thesis.dtx
@@ -196,6 +196,9 @@
 % is not final.  Also helps reviewers tell you what version they're
 % correcting.
 %
+% \DescribeOption{indentfirst}
+% \Lopt{indentfirst} indents the first paragraph after sections etc.
+%
 %
 % \subsubsection{Interesting \cls{book} options}
 % 
@@ -559,6 +562,7 @@
 \newif\if@boldpart
 \newif\if@dottedpart
 \newif\if@draftwatermark
+\newif\if@indentfirst
 \newif\if@appendix
 \newif\if@final \@finalfalse
 %    \end{macrocode}
@@ -630,12 +634,19 @@
 % \end{option}
 %
 % \begin{option}{draftwatermark}
-% Set draft watermark flag
+% Set \Lopt{draftwatermark} flag
 %    \begin{macrocode}
 \DeclareOptionX{draftwatermark}{\@draftwatermarktrue}
 %    \end{macrocode}
 % \end{option}
 %
+% \begin{option}{indentfirst}
+% Set \Lopt{indentfirst} flag
+%    \begin{macrocode}
+\DeclareOptionX{indentfirst}{\@indentfirsttrue}
+%    \end{macrocode}
+% \end{option}
+%
 % Define the book options that \Lopt{final} and \Lopt{draft} need to
 % access.
 % \begin{option}{oneside}
@@ -692,7 +703,7 @@
 %
 % \subsection{Internal package includes}
 %
-
+%
 % Include some other packages we'll need.  If the package is not
 % installed on your system, see Section \ref{sec:dependencies} for
 % installation instructions.
@@ -711,6 +722,7 @@
 \RequirePackage{setspace}
 %    \end{macrocode}
 %
+%
 % \subsubsection{\pkg{calc}}
 %
 % \href{http://www.ctan.org/tex-archive/macros/latex/required/tools/}{\pkg{calc}}
@@ -719,6 +731,7 @@
 \RequirePackage{calc}
 %    \end{macrocode}
 %
+%
 % \subsubsection{\pkg{graphicx}}
 %
 % \href{http://www.ctan.org/tex-archive/macros/latex/required/graphics/}{\pkg{graphicx}}
@@ -740,6 +753,7 @@
 %     [final]
 % \end{example}
 %
+%
 % \subsubsection{\pkg{draftmark}}
 %
 % The Comp.~Sci.\ class used
@@ -751,10 +765,10 @@
 % which unfortunately has a number of apparently non-standard dependencies
 % (\href{http://www.ctan.org/tex-archive/macros/latex/contrib/etextools/}{\pkg{etextools}},
 %  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/etoolbox/}{\pkg{etoolbox}},
-%  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/xifthen/}{\pkg{xifthen}},
+%  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/lastpage/}{\pkg{lastpage}},
 %  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/ltxnew/}{\pkg{ltxnew}},
 %  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/pagerange/}{\pkg{pagerange}},
-%  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/lastpage/}{\pkg{lastpage}},
+%  \href{http://www.ctan.org/tex-archive/macros/latex/contrib/xifthen/}{\pkg{xifthen}},
 %  if only I had the space to install |texlive-latexextra| |:p|).
 % The output is, however, very flexible, and it \emph{does} work with
 % both \LaTeX\ and pdf\LaTeX.  If you don't like the default watermark,
@@ -766,6 +780,16 @@
 \fi
 %    \end{macrocode}
 %
+%
+% \subsubsection{\pkg{indentfirst}}
+%
+%    \begin{macrocode}
+\if@indentfirst
+  \RequirePackage{indentfirst}
+\fi
+%    \end{macrocode}
+%
+%
 % \subsubsection{\pkg{geometry}}
 %
 % Setup page margins with the
@@ -786,29 +810,52 @@
 % Note that we include the \pkg{geometry} package after loading \cls{book} to
 % override the margin manipulation that takes place in \cls{book}.
 %
+%
 % \subsubsection{\pkg{fancyhdr}}
 %
 % \href{http://www.ctan.org/tex-archive/macros/latex/contrib/fancyhdr/}{\pkg{fancyhdr}}
 % for correct page numbering and fancy headers.
+% From the Manual 2.3 p5, ``Pagination''
+% \begin{quote}
+%   Place page numbers in the upper right-hand corner of the page,
+%   3/4'' from the top.
+% \end{quote}
 %    \begin{macrocode}
 \RequirePackage{fancyhdr}
 %    \end{macrocode}
-% Setup the standard |fancy| format.  |\leftmark| is the higher level
-% mark, see |\chaptermark| below.  |\rightmark| is the lower level
-% mark, see |\sectionmark| below.
+% Setup the standard |fancy| format.
 %    \begin{macrocode}
 \pagestyle{fancy}
 \fancyhf{}
-\fancyhead[LE,RO]{\slshape\rightmark}
-\fancyhead[LO,RE]{\slshape\leftmark}
-\fancyfoot[LE,RO]{\thepage}
+\renewcommand{\headrulewidth}{0pt}
+%    \end{macrocode}
+% 0.4 pt is \pkg{fancyhdr}'s default |\headrulewidth|, so we'll
+% recycle the value.
+%    \begin{macrocode}
+\renewcommand{\footrulewidth}{0.4pt}
 %    \end{macrocode}
-% Override the |plain| format (for chapter pages, etc.).
+% |\leftmark| is the higher level mark, see |\chaptermark| below.
+% |\rightmark| is the lower level mark, see |\sectionmark| below.
+% We put the lower level mark to the outside because it changes more
+% often.  Page numbers also go on the outside.
+%    \begin{macrocode}
+\fancyfoot[RE,LO]{\slshape\leftmark}
+\fancyfoot[LE,RO]{\slshape\rightmark}
+\fancyhead[LE,RO]{\thepage}
+%    \end{macrocode}
+% Override the |plain| format (for part pages, etc.).
 %    \begin{macrocode}
 \fancypagestyle{plain}{
   \fancyhf{}
-  \renewcommand{\headrulewidth}{0pt}
-  \fancyfoot[LE,RO]{\thepage}
+  \renewcommand{\footrulewidth}{0pt}
+  \fancyhead[LE,RO]{\thepage}
+}
+%    \end{macrocode}
+% Keep the |empty| format at its default.
+%    \begin{macrocode}
+\fancypagestyle{empty}{
+  \fancyhf{}
+  \renewcommand{\footrulewidth}{0pt}
 }
 %    \end{macrocode}
 %
@@ -1486,7 +1533,14 @@
 %    \end{macrocode}
 % \end{macro}
 %
-% \begin{macro}{\chaptermark}
+% \begin{macro}{\schaptermark}
+% Setup unnumbered chapter marks for \pkg{fancyhdr}.
+%    \begin{macrocode}
+\newcommand\schaptermark[1]{\markboth{\MakeUppercase{#1}}{}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\sectionmark}
 % Setup space rather than period separated section marks.
 % (\file{classes.dtx}, L2054)
 %    \begin{macrocode}
@@ -1801,12 +1855,14 @@
 % \end{macro}
 %
 % \begin{macro}{\@schapter}
-% We don't have to worry about |\@schapter|, since it is very simple.
-% In onecolumn mode it's just
+% This macro is called when we have an unnumbered chapter.  We drop
+% \file{classes.dtx}'s \Lopt{twocolumn} code and set marks for
+% \pkg{fancyhdr}.
 % (\file{classes.dtx}, L2582).
 %    \begin{macrocode}
-%\def\@schapter#1{\@makeschapterhead{#1}%
-%                 \@afterheading}
+\def\@schapter#1{\schaptermark{#1}%
+                 \@makeschapterhead{#1}%
+                 \@afterheading}
 %    \end{macrocode}
 % \end{macro}
 %
@@ -2928,8 +2984,15 @@ parenthetical citation\citep{rief97}.
 %    \begin{macrocode}
 %<*blabla>
 \ProvidesPackage{blabla} [2010/01/11 1.0 Dummy text generation]
+%    \end{macrocode}
+% Use
+% \href{http://www.ctan.org/tex-archive/macros/latex/contrib/forloop/}{\pkg{foorloop}}
+% for
+% \begin{command}
+%   `\cs{forloop}\oarg{step}\marg{counter}\marg{initial value}\marg{condition}\marg{code}'
+% \end{command}
+%    \begin{macrocode}
 \RequirePackage{forloop}[2006/09/18]
-%% http://www.ctan.org/tex-archive/macros/latex/contrib/forloop/
 
 \newcounter{blabla@i}
 \newcounter{blabla@j}