same as in `.gitignore` files; see linkgit:gitignore[5].
Unlike `.gitignore`, negative patterns are forbidden.
-When deciding what attributes are assigned to a path, git
+When deciding what attributes are assigned to a path, Git
consults `$GIT_DIR/info/attributes` file (which has the highest
precedence), `.gitattributes` file in the same directory as the
path in question, and its parent directories up to the toplevel of the
EFFECTS
-------
-Certain operations by git can be influenced by assigning
+Certain operations by Git can be influenced by assigning
particular attributes to a path. Currently, the following
operations are attributes-aware.
These attributes affect how the contents stored in the
repository are copied to the working tree files when commands
such as 'git checkout' and 'git merge' run. They also affect how
-git stores the contents you prepare in the working tree in the
+Git stores the contents you prepare in the working tree in the
repository upon 'git add' and 'git commit'.
`text`
Unset::
- Unsetting the `text` attribute on a path tells git not to
+ Unsetting the `text` attribute on a path tells Git not to
attempt any end-of-line conversion upon checkin or checkout.
Set to string value "auto"::
When `text` is set to "auto", the path is marked for automatic
- end-of-line normalization. If git decides that the content is
+ end-of-line normalization. If Git decides that the content is
text, its line endings are normalized to LF on checkin.
Unspecified::
- If the `text` attribute is unspecified, git uses the
+ If the `text` attribute is unspecified, Git uses the
`core.autocrlf` configuration variable to determine if the
file should be converted.
-Any other value causes git to act as if `text` has been left
+Any other value causes Git to act as if `text` has been left
unspecified.
`eol`
Set to string value "crlf"::
- This setting forces git to normalize line endings for this
+ This setting forces Git to normalize line endings for this
file on checkin and convert them to CRLF when the file is
checked out.
Set to string value "lf"::
- This setting forces git to normalize line endings to LF on
+ This setting forces Git to normalize line endings to LF on
checkin and prevents conversion to CRLF when the file is
checked out.
End-of-line conversion
^^^^^^^^^^^^^^^^^^^^^^
-While git normally leaves file contents alone, it can be configured to
+While Git normally leaves file contents alone, it can be configured to
normalize line endings to LF in the repository and, optionally, to
convert them to CRLF when files are checked out.
-Here is an example that will make git normalize .txt, .vcproj and .sh
+Here is an example that will make Git normalize .txt, .vcproj and .sh
files, ensure that .vcproj files have CRLF and .sh files have LF in
the working directory, and prevent .jpg files from being normalized
regardless of their content.
Other source code management systems normalize all text files in their
repositories, and there are two ways to enable similar automatic
-normalization in git.
+normalization in Git.
If you simply want to have CRLF line endings in your working directory
regardless of the repository you are working with, you can set the
* text=auto
------------------------
-This ensures that all files that git considers to be text will have
+This ensures that all files that Git considers to be text will have
normalized (LF) line endings in the repository. The `core.eol`
-configuration variable controls which line endings git will use for
+configuration variable controls which line endings Git will use for
normalized files in your working directory; the default is to use the
native line ending for your platform, or CRLF if `core.autocrlf` is
set.
-------------------------------------------------
$ echo "* text=auto" >>.gitattributes
-$ rm .git/index # Remove the index to force git to
+$ rm .git/index # Remove the index to force Git to
$ git reset # re-scan the working directory
$ git status # Show files that will be normalized
$ git add -u
manual.pdf -text
------------------------
-Conversely, text files that git does not detect can have normalization
+Conversely, text files that Git does not detect can have normalization
enabled manually.
------------------------
weirdchars.txt text
------------------------
-If `core.safecrlf` is set to "true" or "warn", git verifies if
+If `core.safecrlf` is set to "true" or "warn", Git verifies if
the conversion is reversible for the current setting of
-`core.autocrlf`. For "true", git rejects irreversible
-conversions; for "warn", git only prints a warning but accepts
+`core.autocrlf`. For "true", Git rejects irreversible
+conversions; for "warn", Git only prints a warning but accepts
an irreversible conversion. The safety triggers to prevent such
a conversion done to the files in the work tree, but there are a
few exceptions. Even though...
`ident`
^^^^^^^
-When the attribute `ident` is set for a path, git replaces
+When the attribute `ident` is set for a path, Git replaces
`$Id$` in the blob object with `$Id:`, followed by the
40-character hexadecimal blob object name, followed by a dollar
sign `$` upon checkout. Any byte sequence that begins with
Another use of the content filtering is to store the content that cannot
be directly used in the repository (e.g. a UUID that refers to the true
-content stored outside git, or an encrypted content) and turn it into a
+content stored outside Git, or an encrypted content) and turn it into a
usable form upon checkout (e.g. download the external content, or decrypt
the encrypted content).
where the attribute is not in place would normally cause merge
conflicts.
-To prevent these unnecessary merge conflicts, git can be told to run a
+To prevent these unnecessary merge conflicts, Git can be told to run a
virtual check-out and check-in of all three stages of a file when
resolving a three-way merge by setting the `merge.renormalize`
configuration variable. This prevents changes caused by check-in
`diff`
^^^^^^
-The attribute `diff` affects how 'git' generates diffs for particular
-files. It can tell git whether to generate a textual patch for the path
+The attribute `diff` affects how Git generates diffs for particular
+files. It can tell Git whether to generate a textual patch for the path
or to treat the path as a binary file. It can also affect what line is
-shown on the hunk header `@@ -k,l +n,m @@` line, tell git to use an
-external command to generate the diff, or ask git to convert binary
+shown on the hunk header `@@ -k,l +n,m @@` line, tell Git to use an
+external command to generate the diff, or ask Git to convert binary
files to a text format before generating the diff.
Set::
specify one or more options, as described in the following
section. The options for the diff driver "foo" are defined
by the configuration variables in the "diff.foo" section of the
- git config file.
+ Git config file.
Defining an external diff driver
command = j-c-diff
----------------------------------------------------------------
-When git needs to show you a diff for the path with `diff`
+When Git needs to show you a diff for the path with `diff`
attribute set to `jcdiff`, it calls the command you specified
with the above configuration, i.e. `j-c-diff`, with 7
parameters, just like `GIT_EXTERNAL_DIFF` program is called.
addition to_ the usual binary diff that you might send.
Because text conversion can be slow, especially when doing a
-large number of them with `git log -p`, git provides a mechanism
+large number of them with `git log -p`, Git provides a mechanism
to cache the output and use it in future diffs. To enable
caching, set the "cachetextconv" variable in your diff driver's
config. For example:
This will cache the result of running "exif" on each blob
indefinitely. If you change the textconv config variable for a
-diff driver, git will automatically invalidate the cache entries
+diff driver, Git will automatically invalidate the cache entries
and re-run the textconv filter. If you want to invalidate the
cache manually (e.g., because your version of "exif" was updated
and now produces better output), you can remove the cache
changes in the most appropriate way for your data format.
A textconv, by comparison, is much more limiting. You provide a
-transformation of the data into a line-oriented text format, and git
+transformation of the data into a line-oriented text format, and Git
uses its regular diff tools to generate the output. There are several
advantages to choosing this method:
odt2txt).
2. Git diff features. By performing only the transformation step
- yourself, you can still utilize many of git's diff features,
+ yourself, you can still utilize many of Git's diff features,
including colorization, word-diff, and combined diffs for merges.
3. Caching. Textconv caching can speed up repeated diffs, such as those
*.ps -diff
------------------------
-This will cause git to generate `Binary files differ` (or a binary
+This will cause Git to generate `Binary files differ` (or a binary
patch, if binary patches are enabled) instead of a regular diff.
However, one may also want to specify other diff driver attributes. For
Set::
- Notice all types of potential whitespace errors known to git.
+ Notice all types of potential whitespace errors known to Git.
The tab width is taken from the value of the `core.whitespace`
configuration variable.
`export-subst`
^^^^^^^^^^^^^^
-If the attribute `export-subst` is set for a file then git will expand
+If the attribute `export-subst` is set for a file then Git will expand
several placeholders when adding this file to an archive. The
expansion depends on the availability of a commit ID, i.e., if
linkgit:git-archive[1] has been given a tree instead of a commit or a
the attributes given to path `t/abc` are computed as follows:
1. By examining `t/.gitattributes` (which is in the same
- directory as the path in question), git finds that the first
+ directory as the path in question), Git finds that the first
line matches. `merge` attribute is set. It also finds that
the second line matches, and attributes `foo` and `bar`
are unset.
projects / git.git / blobdiff