# Genkernel Configuration File

# ===========GENKERNEL BASIC CONFIGURATION=============

# Run 'make menuconfig' before compiling this kernel?
MENUCONFIG="no"

# Run 'make clean' before compilation?
# If set to NO, implies MRPROPER WILL NOT be run
# Also, if clean is NO, it won't copy over any configuration
# file, it will use what's there.
CLEAN="yes"

# Run 'make mrproper' before configuration/compilation?
MRPROPER="yes"

# Copy bootsplash into the initrd image?
BOOTSPLASH="yes"

# Override the arch detection?
# ARCH_OVERRIDE="x86"

# Mount BOOTDIR automatically if it isn't mounted?
MOUNTBOOT="yes"

# Save the new configuration in /etc/kernels upon
# successfull compilation
SAVE_CONFIG="yes"

# Use Color output in Genkernel?
USECOLOR="yes"

# Add new kernel to grub?
# BOOTLOADER="grub"

# Clear build cache dir
# CLEAR_CACHE_DIR="yes"

# Genkernel uses an independent configuration for MAKEOPTS, and does not source
# /etc/make.conf . You can override the default setting by uncommenting and
# tweaking the following line. Default setting is set up by
# ${GK_SHARE}/${ARCH_OVERRIDE}/config.sh . The recommended value for -j
# argument is: <number of processors>*<number of cores per processor>+1
# MAKEOPTS="-j2"

# =========GENKERNEL LOCATION CONFIGURATION============
# Variables:
#   %%ARCH%%  - Final determined architecture
#   %%CACHE%% - Final determined cache location

# Set the boot directory, default is /boot
#BOOTDIR="/boot"

# Default share directory location
GK_SHARE="/usr/share/genkernel"

# Location of helper-scripts
#GK_BIN="${GK_SHARE}/bin"
GK_BIN="${GK_SHARE}"
# Location of the default cache
CACHE_DIR="${GK_SHARE}/pkg/%%ARCH%%"
# Log output file
DEBUGFILE="/var/log/genkernel.log"
# Debug Level
DEBUGLEVEL=1

# Default location of kernel source
DEFAULT_KERNEL_SOURCE="/usr/src/linux"
# Default kernel config (only use to override using %%ARCH%%/kernel-config-${VER}.${PAT} !)
# DEFAULT_KERNEL_CONFIG="${GK_SHARE}/%%ARCH%%/kernel-config"

# Configuration file for busybox
BUSYBOX_CONFIG="${GK_SHARE}/%%ARCH%%/busy-config"
# BusyBox Version
BUSYBOX_VER="1.1.3+gentoo"
# Busybox bin-cache location, to store pre-compiled busybox
# binary is just a bzip2 busybox executable
BUSYBOX_BINCACHE="%%CACHE%%/busybox-${BUSYBOX_VER}-%%ARCH%%.bz2"
# Location of BusyBox source tarball
BUSYBOX_SRCTAR="${GK_SHARE}/pkg/busybox-${BUSYBOX_VER}.tar.bz2"
# Directory created after busybox tarball is extracted
BUSYBOX_DIR="busybox-${BUSYBOX_VER}"

MODULE_INIT_TOOLS_VER="0.9.15-pre4"
MODULE_INIT_TOOLS_SRCTAR="${GK_SHARE}/pkg/module-init-tools-${MODULE_INIT_TOOLS_VER}.tar.bz2"
MODULE_INIT_TOOLS_DIR="module-init-tools-${MODULE_INIT_TOOLS_VER}"
MODULE_INIT_TOOLS_BINCACHE="%%CACHE%%/insmod-%%ARCH%%-static-2.6.bz2"

MODUTILS_VER="2.4.26"
MODUTILS_SRCTAR="${GK_SHARE}/pkg/modutils-${MODUTILS_VER}.tar.bz2"
MODUTILS_DIR="modutils-${MODUTILS_VER}"
MODUTILS_BINCACHE="%%CACHE%%/insmod-%%ARCH%%-static-2.4.bz2"

DIETLIBC_VER="0.27"
DIETLIBC_SRCTAR="${GK_SHARE}/pkg/dietlibc-${DIETLIBC_VER}.tar.bz2"
DIETLIBC_DIR="dietlibc-${DIETLIBC_VER}"
DIETLIBC_BINCACHE="%%CACHE%%/dietlibc-${DIETLIBC_VER}-%%ARCH%%.tar.bz2"
DIETLIBC_BINCACHE_TEMP="%%CACHE%%/dietlibc-${DIETLIBC_VER}-%%ARCH%%-tempdir"

DEVFSD_VER="1.3.25-dietlibc-kernel25"
DEVFSD_SRCTAR="${GK_SHARE}/pkg/devfsd-${DEVFSD_VER}.tar.bz2"
DEVFSD_DIR="devfsd"
DEVFSD_BINCACHE="%%CACHE%%/devfsd-${DEVFSD_VER}-%%ARCH%%.bz2"
DEVFSD_CONF_BINCACHE="%%CACHE%%/devfsd-conf-${DIETLIBC_VER}-%%ARCH%%.bz2"

#UDEV_VER="VERSION_UDEV"
#UDEV_DIR="udev-${UDEV_VER}"
#UDEV_SRCTAR="${GK_SHARE}/pkg/udev-${UDEV_VER}.tar.bz2"
#UDEV_BINCACHE="%%CACHE%%/udev-${UDEV_VER}-%%ARCH%%.tar.bz2"

#KLIBC_VER="VERSION_KLIBC"
#KLIBC_DIR="klibc-${KLIBC_VER}"
#KLIBC_SRCTAR="${GK_SHARE}/pkg/klibc-${KLIBC_VER}.tar.bz2"
#KLIBC_BINCACHE="%%CACHE%%/klibc-${KLIBC_VER}-%%ARCH%%.tar.bz2"

DEVICE_MAPPER_VER="VERSION_DMAP"
DEVICE_MAPPER_DIR="device-mapper.${DEVICE_MAPPER_VER}"
DEVICE_MAPPER_SRCTAR="${GK_SHARE}/pkg/device-mapper.${DEVICE_MAPPER_VER}.tgz"
DEVICE_MAPPER_BINCACHE="%%CACHE%%/device-mapper-${DEVICE_MAPPER_VER}-%%ARCH%%.tar.bz2"

LVM2_VER="VERSION_LVM2"
LVM2_DIR="LVM2.${LVM2_VER}"
LVM2_SRCTAR="${GK_SHARE}/pkg/LVM2.${LVM2_VER}.tgz"
LVM2_BINCACHE="%%CACHE%%/LVM2.${LVM2_VER}-%%ARCH%%.tar.bz2"

DMRAID_VER="VERSION_DMRAID"
DMRAID_DIR="dmraid/${DMRAID_VER}"
DMRAID_SRCTAR="${GK_SHARE}/pkg/dmraid-${DMRAID_VER}.tar.bz2"
DMRAID_BINCACHE="%%CACHE%%/dmraid-${DMRAID_VER}-%%ARCH%%.tar.bz2"

# Kernel Version Compatibility
# (from http://www.am-utils.org/project-unionfs.html)

# 2.6.9 - 2.6.15	1.1.5
# 2.6.16			1.2
# 2.6.17			1.3

UNIONFS_VER="VERSION_UNIONFS"
UNIONFS_DIR="unionfs-${UNIONFS_VER}"
UNIONFS_SRCTAR="${GK_SHARE}/pkg/unionfs-${UNIONFS_VER}.tar.gz"
UNIONFS_BINCACHE="%%CACHE%%/unionfs-${UNIONFS_VER}-tools-%%ARCH%%.tar.bz2"
UNIONFS_MODULES_BINCACHE="%%CACHE%%/unionfs-${UNIONFS_VER}-modules-%%KV%%-%%ARCH%%.tar.bz2"

E2FSPROGS_VER="VERSION_E2FSPROGS"
E2FSPROGS_DIR="e2fsprogs-${E2FSPROGS_VER}"
E2FSPROGS_SRCTAR="${GK_SHARE}/pkg/e2fsprogs-${E2FSPROGS_VER}.tar.gz"
BLKID_BINCACHE="%%CACHE%%/blkid-${E2FSPROGS_VER}-%%ARCH%%.bz2"

SUSPEND_VER="VERSION_SUSPEND"
SUSPEND_DIR="suspend-${SUSPEND_VER}"
SUSPEND_SRCTAR="${GK_SHARE}/pkg/suspend-${SUSPEND_VER}.tar.gz"
SUSPEND_BINCACHE="%%CACHE%%/suspend-${SUSPEND_VER}-%%ARCH%%.tar.bz2"